Download USER MANUAL - Smart Luck

KENO WHEEL™
2. GETTING STARTED
2.1 Hardware and Operating Requirements
The KENO WHEEL™ requires an IBM PC or compatible
computer running PC/MS DOS Version 2 or higher with at least
a single 360k floppy disk and 256k of memory. A printer is very
useful but is not essential. Works in a DOS window with
Windows 3.x, Windows 9x, Windows ME, Windows NT, and
Windows 2000. Does NOT require MSDOS mode from windows.
2.2 Installation
Please refer to “How to Install Smart Luck Programs” to
install Keno Wheel in the easiest way. If you want to install the
program manually, three files can be copied to your hard disk or
another floppy to install the program. For example, to install on
your hard disk C drive in the \GH sub-directory, you would select
the drive with C: and press ENTER, then select the directory
with CD \GH and press enter, then copy the three files from the
A drive with COPY A:GAILKW.* and press ENTER.
The three files for the KENO WHEEL™ are:
GAILKW.EXE, GAILKW.WL3, GAILKW.HLP
The additional files on the program disk are:
INSTALL.COM, and 4100.INS
2.3 Setup
The program will use the screen mode that is selected when
the program is first run. Normally this is not a problem. However,
if you have an old computer and only a black and white or amber
screen or certain LCD screens, you may not be able to read the
information on the screen. If this occurs, or if the screen is
difficult to read, try one of the following:
Run the program with GAILKW /BW80 to force the program
to use black and white mode, or use GAILKW /CO80 to force
color mode. The program will save the resulting settings as the
default, so this needs to be done only once.
If your printer is not connected to printer port 1, LPT1, you
can change the program's default printer by typing GAILKW
/PRN=DEV where DEV is one of LPT1, LPT2, LPT3, PRN or
WIN. The program uses PRN by default. If you are running an
5