Download User`s Manual

Button
Operation
Display
Explanation of
Selection Menu
Description of Operation
Press to display.
Press the
button to display
.
<To display the actual sensing
distance>
Press the
button to enable
setting of S1-Before.
[Change numeric value]
[Move digit]
[Numeric
value before
change]
Set any value.
Press to set.
Press the
button to move
the digit, press the
button to
change the numeric value, and
set the measured value before
S1 is changed.
CONTENTS
-8 0
INTRODUCTION
8
58 50 42
PREPARATION
FOR
MEASUREMENT
58
42
After
8
Before
BASIC
SETUP
-8
S1
S2
Press to display.
Press the
button to apply
* If the
button is pressed
the numeric value of S1-Before. when the cursor is at the
right-most digit or the
Press the
button to display
button is pressed when the
.
cursor is at the left-most digit,
the setting will be canceled.
Press the
button to enable
setting of S1-After.
[Change numeric value]
[Move digit]
Press to set.
[Numeric
value after
change]
Set any value.
FLOW OF
OPERATION
MAIN
APPLICATIONS
& SETTING
METHODS
Height
Steps
and
Warpage
Double
Sheet
Detection
Thickness
Press the
button to move
the digit, press the
button to
change the numeric value, and
set the measured value after S1
is changed.
Positioning
Eccentricity
and Surface
Deflection
Press the
button to apply
the numeric value of S1-After.
DETAILED
SETTINGS
TROUBLESHOOTING
SPECIFICATIONS
INDEX
SETTING
TRANSITION
CHARTS
ZX2 User’s Manual
Positioning
69