Download Ecora Patch Manager 4.0 User Manual

1. Since you selected Specify Hosts, you must select a method. Click on any or all of the
following tabs:
ƒ
Net Browsing - allows you to enter the domain and computer name(s) you wish to
use
ƒ
IP - allows you to enter the IP addresses of the systems you with to use or to import
a list of IP addresses
ƒ
IP Ranges - allows you to enter pair of IP addresses and discover all systems with
IP addresses between them
2. On the Net Browsing tab, enter a
domain and computer name and click
Add.
Note: You can also choose to save
to file or load from file (see file
format).
3. On the IP tab, enter the IP address
of a system.
4. Enter the username and password
(and confirm the password) and click
Add.
Note: You can also choose to save
to file or load from file (see file
format).
5. Enter the time limit (in minutes)
during which the software will
discover systems.
6. On the IP Ranges tab, enter a lower
limit IP address and an upper limit IP
address.
7. Enter the username and password
(and confirm the password) and click
Add.
Note: You can also choose to save
to file or load from file (see file
format).
8. Enter the time limit (in minutes)
during which the software will
discover systems.
9. Click on the Next > button.
10. Return to step 3 above.
Copyright © Ecora Software Corporation • (www.ecora.com) • 18