Download PPC-2015 User Manual

Chapter 4
Award BIOS Setup
7.
Select Save & Exit Setup to save the option you just configured.
Otherwise, the old password is still in the system the next time you turn
your system on.
8.
Press <Enter> to exit to the main menu.
If you forget or lose your password, the only way to access the system is to clear the
CMOS RAM. If you clear the CMOS RAM, all setup information is lost, and you must run
the BIOS setup program again.
Note
Save & Exit Setup
Use the Save & Exit Setup option to save your modifications in the CMOS
memory.
When you highlight this option on the main menu, the following message
appears:
Save to CMOS and Exit (Y/N) ? Y
Press <Enter> to save the configuration changes.
Exit Without Saving
Use the Exit Without Saving option to exit the setup utility without saving
your modifications.
When you highlight this option on the main menu, the following message
appears:
Quit Without Saving (Y/N) ? N
You can change the prompt to Y and press <Enter> to exit this option.
PPC-2015 User Manual
4-22
ni.com