Download User`s Manual

Sanitary Tapware – Commission Decision 2013/250/EU
MANUFACTURER'S CHECK-LIST
This checklist summarises the documentation to be provided for each criterion. This check-list must be
completed by the applicant.
Yes 
No 
 Results of tests conducted in accordance with testing procedure indicated in
respective EN standards (see Table 2).
Yes 
No 
 Description of the economy setting (i.e. flow limiting device applied)
Yes 
No 
 DECLARATION 2 signed by the producer
Yes 
No 
 Results of tests conducted in accordance with testing procedure indicated in Yes 
respective EN standards (see Table 2)
No 
 DECLARATION 3 signed by the producer
Yes 
No 
Yes 
No 
Yes 
No 
Yes 
No 

Declaration used to set fees for the EU Ecolabel – DECLARATION 1
signed by the producer
Criterion 1 Water consumption and related energy saving
1(a) Maximum available water flow rate
Documents to be submitted to the Competent Body:
1(b) Lowest maximum available water flow rate
Documents to be submitted to the Competent Body:
1(c) Temperature management
Documents to be submitted to the Competent Body:
 Documentation describing the technology or device applied in the product for
the temperature management
OR
 If it is a sanitary tapware designed to be fitted to a water supply that is already
temperature controlled, please explain the specific technical property that
makes the sanitary tapware suited for fitting to this form of system
 DECLARATION 4 signed by the producer
1(d) Time control
Documents to be submitted to the Competent Body:

Results of a test conducted in accordance with the standard:
 EN 15091 for electronic opening and closing sanitary tapware (sensors)
OR
 EN 816 for automatic shut-off valves (time limiters)
Page 46