Download VISIX Network Camera v5.1 User Manual

User Manual| VISIX Network Camera Figure 6-­‐7 Port Settings 2)
Set the HTTP port, RTSP port and HTTPS port of the camera. !
HTTP Port: The default port number is 80, and can be changed to any port range 1024 to 65535. !
RTSP Port: The default port number is 554. !
HTTPS Port: The default port number is 443, and can be changed to any port range 1024 to 65535. !
Server Port: The default server port number is 8000. 3)
Click Save to save the settings. Note: A reboot is required for the settings to take effect. CONFIGURING PPPOE SETTINGS Steps: 1) Enter the PPPoE Settings interface: Configuration >Advanced Configuration > Network > PPPoE Figure 6-­‐8 PPPoE Settings 2)
Check the Enable PPPoE checkbox to enable this feature. 3)
Enter User Name, Password, and Confirm password for PPPoE access. Note: The User Name and Password should be assigned by your ISP. 4)
Click Save to save and exit the interface. Note: A reboot is required for the settings to take effect. CONFIGURING DDNS SETTINGS Purpose: If your camera is set to use PPPoE as its default network connection, you can use the Dynamic DNS (DDNS) for network access. Before you start: Registration on the DDNS server is required before configuring the DDNS settings of the camera. Steps: 10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC 33