Download Please click here to specification

Transcript
www.batteryspace.com
AA Portable Power Corp.
Preset
Multi-Registers
IA
Double
Optional
Preset
Multi-Registers
IB
Double
Optional
Preset
Multi-Registers
TMAWD
Double
Optional
Preset
Multi-Registers
TMBWD
Double
Optional
Preset
Multi-Registers
TMTRANRIS
Double
Optional
Preset
Multi-Registers
TMTRANFAL
Double
Optional
Preset
Multi-Registers
MODETRAN
0~2
Optional
Preset
Multi-Registers
CMD
25
mandatory
Table 22 System parameter setting mode:
Operation
Register
Value
Description
Preset
Multi-Registers
IMAX
Double
Optional
Preset
Multi-Registers
UMAX
Double
Optional
Preset
Multi-Registers
PMAX
Double
Optional
Force Single Coil
REMOTE
0xFF00/0x0000
Optional
Preset
Multi-Registers
CMD
41
mandatory
4.9 Remote operation
The DB9 interface connector on the rear panel of the power supplier can be transferred to RS232
interface through the voltage level shift cable(M-131 or M-133), the following information will tell you how
to use the computer to control the output of the power supplier. Before carrying out the remote operation
mode, please use the voltage level shift cable(M-131 or M-133)provided by our company, for M-131 or
M-133 can not only transform TTL voltage level into RS232 signal, but also connect the DB9 interface
connector with computer’s serial interface.
4.9.1 M-131 or M-133 Communication Cable
The DB9 interface connector on the rear panel of electronic load is TTL voltage level; you can use the
communication cable (M-131 or M-133) to connect the DB9 interface connector of the electronic load and
the RS-232 interface connector of computer for the communication. Please refer to the following picture for
M-131 or M-133.
42