Download Please click here to specification
Transcript
www.batteryspace.com AA Portable Power Corp. Preset Multi-Registers IA Double Optional Preset Multi-Registers IB Double Optional Preset Multi-Registers TMAWD Double Optional Preset Multi-Registers TMBWD Double Optional Preset Multi-Registers TMTRANRIS Double Optional Preset Multi-Registers TMTRANFAL Double Optional Preset Multi-Registers MODETRAN 0~2 Optional Preset Multi-Registers CMD 25 mandatory Table 22 System parameter setting mode: Operation Register Value Description Preset Multi-Registers IMAX Double Optional Preset Multi-Registers UMAX Double Optional Preset Multi-Registers PMAX Double Optional Force Single Coil REMOTE 0xFF00/0x0000 Optional Preset Multi-Registers CMD 41 mandatory 4.9 Remote operation The DB9 interface connector on the rear panel of the power supplier can be transferred to RS232 interface through the voltage level shift cable(M-131 or M-133), the following information will tell you how to use the computer to control the output of the power supplier. Before carrying out the remote operation mode, please use the voltage level shift cable(M-131 or M-133)provided by our company, for M-131 or M-133 can not only transform TTL voltage level into RS232 signal, but also connect the DB9 interface connector with computer’s serial interface. 4.9.1 M-131 or M-133 Communication Cable The DB9 interface connector on the rear panel of electronic load is TTL voltage level; you can use the communication cable (M-131 or M-133) to connect the DB9 interface connector of the electronic load and the RS-232 interface connector of computer for the communication. Please refer to the following picture for M-131 or M-133. 42