Download "user manual"

1
2
3
X 1 Y1
X 2 Y1
Y
O
X
X 1 Y2
X 2 Y2
4
5
6
7
1 laser Tube
Third reflector
5 Focus tube
2 First reflector
6 Workpiece
3 Second
reflector
4
7 Workpiece carrying platform
The optical system of the machine is as shown above, the adjustment of the
optical system shall start from transmitter
1、The following steps to improper operation, may emit laser damage
caused by equipment or operator ,should pay particular attention!
2、Use the testing button on the front panel (click) ,the laser output current is
adjusted to the appropriate value (usually the optical power is not too large, such as
4 ~ 8mA) Note that there may be a strong laser emission, placing a transparent
organic board in the front of the laser tube output window for dimming to
maintain an appropriate distance to avoid laser materials to produce soot pollution
output mirror. Completed, remove organic board
Organic
board
有机板
Laser Tube
激光管
.
46-28