Download GLOBAL ACCESS - EXPLORER USER MANUAL

buttons to select the year then press the right button to select the month. Use
the arrow buttons to scroll through the months.
Setting the Incoming Message Alert
From the Function Menu Screen, use the arrow buttons to move the cursor to the
musical note symbol. Select this function by pressing the right button.
There are 4 different alert modes, an audible alert, a vibrating alert, an audible
alert after vibration alert and no alert, or silent mode. Move the cursor over the
symbols while the pager gives you a sample of each alert mode.
Setting an audible alert
From the choose alert menu, press the right button while the cursor is on the first
symbol. Move the cursor through the alerts (3 tones / 5 melodies) and press the
right button to select.
Setting the incoming Maildrop Alert On/Off
Move the cursor to the Select Alert function and press the right button twice to
select the maildrop alert then use the arrow button to select on or off.
Select the type of alert by pressing the right button to select while the cursor is in
position over the alert you desire.
Setting the Date & Time
From the function menu move the cursor to the "Set Time" icon / clock and press
the right button to select
Adjust the year with the arrow buttons then press the right button to move to the
month. Select the month and move to the day by pressing the right button
again. Press the right button again to move to the clock type select. Choose 12
or 24 hour time format with the arrow button and press the right button to move to
the hour numbers. Select the hour and note the am/pm before pressing the right
button to move to the minute numbers. Select the format to display time date in
the manner you choose, MDY/DMY/YMD.
Use the right button to select and the arrow buttons to increase or decrease the
numbers.
Setting the alarm
The pager has an alarm that can be set for 1. a daily specific time. 2. a specific
time and date. 3. a specific time and day.