Download Full Manual - Bertemes

2-2-2 Windows 2000/XP IP address setup
1. Click ‘Start’ button (it should be located at lower-left corner of your computer), then
click control panel. Double-click Network and Dial-up Connections icon, double
click Local Area Connection, and Local Area Connection Properties window will
appear. Select ‘Internet Protocol (TCP/IP)’, then click ‘Properties’
2. Select ‘Use the following IP address’, then input the following settings in respective
field:
IP address:
Subnet Mask:
192.168.0.2
255.255.255.0
Click ‘OK’ when finish.