Download User Manual

APPENDIX 2 INTERFACE
ENGLISH VERSION EO1-33057
APPENDIX 2 INTERFACE
USB interface
Standard:
Transfer type:
Transfer rate:
Class:
Control mode:
Number of ports:
Power source:
Connector:
Conforming to V2.0 Full speed
Control transfer, Bulk transfer
Full speed (12M bps)
Printer class
Status with the receive buffer free space information
1
Self power
Type B
Pin No.
1
2
3
4
Signal
VCC
DD+
GND
Series B Plug
LAN
Standard:
Number of ports:
Connector:
LED status:
IEEE802.3 10BASE-T/100BASE-TX
1
RJ-45
LED
LED Status
Link
ON
Link LED
OFF
Activity LED
Link LED (Green)
Activity
ON
OFF
LAN status
10Mbps link or 100Mbps link is detected.
No link is detected.
* Communication cannot be made while
the Link LED is off.
Communicating
Idle
Activity LED (Orange)
LAN cable:
Cable length:
10BASE-T: UTP category 3 or category 5
100BASE-TX: UTP category 5
Segment length Max. 100 m
NOTES:
1. For IP address setting, refer to the B-SX6T/SX8T Series Key Operation Specification stored in the CDROM.
2. When a generally-used twisted pair Ethernet (TPE) or UTP cable is used, a communication error may
occur depending on your operating environment. In such case, you may be requested to use a shielded
twisted pair cable.
EA2- 3