Download JetNet Series

83
www.korenix.com
Industrial Ethernet Switch
JetNet Series Industrial Ethernet Switch
The JetNet Series offers a variety of state-of-art Rack Mount, Gigabit Combo, Managed and Unmanaged
switches. This series meets and exceed all customers’ needs, from cost-effective installation to value-added
TM
TM
TM
O
features, such as Rapid Super Ring, MultiRing , TrunkRing , Rapid Dual Homing (RDH ), -20~70 C wide
range operating temperature for hazardous environment application, plentiful network management functions
utility and many others.
Industrial
PoE Switch
Ethernet Ring Technology
IP67/68
Ethernet Switch
Network reliability is a primary consideration for
Rackmount
industrial Ethernet environment. It is essential to
RM
Managed
Backup Link
Blocking State
recover network failure in a very fast manner that
Switch
keeps the network running properly. Although
Gigabit Switch
Normal State
STP/RSTP can recover a network failure, but its
Redundant
JetNet 4508
convergence time is not fast enough. A ring topology
Switch
with well designed redundancy protocol makes fast
Entry-Level
recovery possible. Generally speaking, there will be
a device in the ring topology acting as a redundancy
Switch
< 20ms
< 20ms
Networking
manager, named RM in short, which chooses a link
in the ring topology to be backup link and controls
Backup Link
Forwarding State
RM
RM
Backup Link
Forwarding State
Computer
Communication
this link to block or forward network traffic. In Normal
Computer
state, there is no failed device or link, RM blocks the
backup link so that the ring can be logically regarded
Abnormal State
Abnormal State
Ethernet
I/O Server
as a line topology. Traffics are transmitted on this
line. Once if there is a failure on any of the devices or
Serial Device
Server
links which
Ethernet Ring redundancy
breaks the line into two segments-Abnormal
Media
state, RM soon recoveries the failure by changing
two segments into a line, so that the traffic can keep
the backup link into forwarding state to connect the
transmitted without being effected.
Converter
Multiport
Serial Card
SFP Module
Rapid Super Ring (RSR) Technology
Din Rail
Power Supply
Rapid Super Ring is the 2nd generation of Korenix
Ring Master
Ring Redundancy technology. The recovery time is
greatly improved from 300ms to few mini seconds for
both copper and fiber ring. The Ring Master can be
auto-selected by the RSR engine. The 1st Ring Port
of the R.M. is the primary path while the 2nd Ring
(1s
t
gP
Rin
ort)
JetNet 5628G
(2nd R
ing
Po
rt)
Rapid Super Ring
Port of the R.M. is the block path. Once the primary
path fails, the 2nd path will be recovered within few
mini seconds.
Besides, the restore time is also shortened to zero in
JetNet 5010G
the R.M. auto-selection mode.
www.korenix.com
84
Comprehensive Redundant Solutions — Multiple Super Ring (MSRTM)
The JetNet series supports MSR
TM
(Multiple Super
Ring); the next new generation of RSR (Rapid Super
Ring) Ring technology. This new technologies is
perfect for different network redundancy applications
and structures. With the MSR
TM
technology, a node
can be configured to multiple rings with the failover
time in as little as 5ms and ZERO-second of restore
time. In addition, users can extend the ring topology
by adding hundreds of JetNet series to meet the
network needs without compromising the speed of
the network. The MSR
TM
also facilitates the JetNet
series to connect with core management switch via
standard Rapid Spanning Tree Protocol or through
RSR
Convergence < 5ms
Restore time = 0ms
multiple paths or nodes to increase the reliability
TM
by Rapid Dual Homing (RDH ) Technology. By
integrating MSR
TM
and Link Aggregation Control
Protocol (LACP) the JetNet series can enhance the
link availability and increase the overall link capacity.
Two or more Fast Ethernet connection are bundled
in order to increase the bandwidth and to create a
resilient and redundant link.
Hybrid Link Media and Speed Supported
The Rapid Super Ring technology is link media and
speed independent. You can setup hybrid link media
and speed on a device of a ring. In the left figure of
RM
Backup Link
Forwarding State
Fiber
Copper
RM
Backup Link
Forwarding State
Gigabit
100Mb
below, the ring ports of the ring are fiber and copper
hybrid. In the right figure of below, the ring ports of
Normal State
the ring are gigabit and 100Mb hybrid, even 10Mb
Normal State
can be supported.
Fiber
Copper
Gigabit
100Mb
JetNet 5010G
Hybrid link media and speed
85
www.korenix.com
Industrial Ethernet Switch
Seamless Ring Port RestorationTM
Seamless restoration is a new Korenix patented
technology which can restore a failed (in Abnormal
RM
Backup Link
Blocking State
state) ring without causing any loop problem,
RM
Backup Link
Forwarding State
Industrial
< 30ms
Link Failure
PoE Switch
topology change, packet loss, and restoration time.
Upon link failure or node failure, RM receives
Normal State
Abnormal State
immediately. Afterward, RM election process restarts
Rackmount
and a new RM which is at one of the broken edge
JetNet 5010G
RM Reelection
Managed
Switch
is elected. Since RM is located at the broken edge,
0 second
Link Restoration
it can block the port at once upon the failed link
Gigabit Switch
restored and then send a WATCHDOG to check the
ring state. If the result is Normal state, it simply does
IP67/68
Ethernet Switch
link down message and forward it’s blocking port
Redundant
Abnormal State
Normal State
Switch
nothing. In addition, it forwards the port and set the
Entry-Level
ring state to Abnormal state. This makes a perfect
restoration that will not result in any loop, topology
RM
Backup Link
Forwarding State
RM
Backup Link
Blocking State
Switch
Networking
change and restoration time (restoration time = 0
Computer
second).
Communication
Computer
Ethernet
I/O Server
Link Redundancy
Serial Device
Server
The Link Aggregation can setup several links as
Aggregation Group is up. The Link Aggregation
a single port. Link Aggregation is a known way to
can either be set up statically or by using the Link
transfer much more data than one single port can
Aggregation Control Protocol (LACP). If you want
deliver. But the Link Aggregation originally was
to protect an important link, you can setup a Link
Multiport
developed to provide redundancy not bandwidth
Aggregation Group between two managed switches.
Serial Card
benefits. It still works, even if only one link of Link
Media
Converter
SFP Module
Din Rail
Power Supply
www.korenix.com
86
TrunkRingTM
TM
Symmetric TrunkRing
TrunkRing
TM
TM
Asymmetric TrunkRing
is a new feature in MSR
TM
which merges
the two technologies of RSR and link aggregation. It
takes advantage of aggregation to enhance the link
Symmetric TrunkRing
redundancy, while increasing the link speed. The ring
will open only if all the aggregated links are broken.
JetNet 5010G
Link aggregation can be achieved by either, static
trunk or LACP protocol. Not all the link sections in
a TrunkRing
TM
need to be the same. Ring links can
be either symmetric or asymmetric. Some are single
links, and the others are aggregated by links where
the number of links in a trunk group can be different.
Users can enhance the link redundancy at different
locations in accordance to the need. And the link with
Asymmetric TrunkRing
lower speed is more likely to be used as the backup
JetNet 5010G
path for restoring the network to full play capacity.
MultiRingTM
MultiRing
TM
provides easier connectivity between two
directions. In addition to extensibility, MultiRing
ring networks. The simplest example is to connect
has great diversity of various ring technologies. With
two rings by a single device. Depending on the
MultiRing
number of ports, a device can even gather multiple
rings, TrunkRing
rings together. As shown in the figure, MultiRing
TM
technology simply extends the network topology
TM
enabled, a device can connect RSR
TM
and a ring of Super Ring together,
which provides extensibility to new technologies while
keeps the great backward compatibility.
by linking multiple rings into a line or into multiple
JetNet 5010G
RSR
SR
Trunk
JetNet 5010G
Simply connect 2 rings by a device
87
TM
JetNet 4508
www.korenix.com
Industrial Ethernet Switch
Rapid Dual Homing (RDHTM) Technology
TM
Rapid Dual Homing (RDH ) replaces DualHoming
Secondary, and Standbys by their link speed.
II and can be used for ring coupling. While keeping
The uplink with the highest speed is more likely
easy configuration and multiple redundancies, the
to be the active path for data transmission. Link
failover time is much faster (less than 50 ms) and the
aggregation is also integrated into RDH . An uplink
restore time is ZERO (seamless restoration). Uplinks
can be a link or several links aggregated as a trunk,
IP67/68
can be auto detected and gathered into groups.
which provides better redundancy and link capacity.
Ethernet Switch
TM
In each group, uplinks are sorted into Primary,
Industrial
PoE Switch
Rackmount
Managed
Switch
1-to1
connection
n-to1
connection
1-to-n
connection
n-to-n
connection
trunk
connection
Gigabit Switch
Redundant
Switch
Entry-Level
Rapid
Dual
Homing
Switch
Ethernet
Ethernet
Networking
Computer
Communication
Computer
JetNet 5010G
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Ring
Coupling
Ethernet
Multiport
Ethernet
Serial Card
SFP Module
Din Rail
Power Supply
JetNet 5010G
www.korenix.com
88
Plentiful Network Management Functions Utility — JetView
Change IP
Firmware upgrade
Config. File backup/restore
JetView
JetView Server
JetView adopts a client/server architecture. Users
30 devices simultaneously, this can be seriously
may use a client application to issue the operations
inconvenient. JetView makes this task virtually
and the device server executes the operations.
effortless! This utility supports auto discovery, group
The major difference between the JetView and other
IP settings, group firmware upgrade, and group
management tools, ex. Web, CLI, and SNMP, is that
configuration file backup/restore. Also, JetView
the JetView can configure several devices at the
can be compatible with various operating systems,
same time. Imagine utilizing Web or CLI or SNMP to
ex. Windows 95/98/ME, 2000, XP, and Linux.
change an IP address or upgrade firmware on over
Flexibility — 100 / 1000Mbps SFP / Combo Ports
The combo ports design adds superb flexibility and
convenience for expand the link over fiber optics.
These ports support several different types of
10/100MM SFP modules, from 2KM multimode to
120KM single mode. The combo ports also make the
port configuration easy, such as 8 RJ45 ports and 2
fiber ports, or 9 RJ45 ports and 1 fiber port.
89
www.korenix.com
Industrial Ethernet Switch
Applications
Coal Mine Monitoring System
Reliable Network Monitoring System
Coal mining is an efficient resource of energy and
is used as a low cost, quality fuel for many power
Industrial
PoE Switch
plants. Mining operations are being equipped
with sophisticated industrial controls and sensors
IP67/68
Ethernet Switch
for safety and operations efficiency. In mining
applications, reliable communication between many
wide spread localizations and large bandwidth
Rackmount
Managed
Switch
equipments are required. A well-known Coal Mine
located in Silesia, Poland, has chosen Korenix
Gigabit Switch
JetNet 5010G for data transmissions which needed
Redundant
to be done in a reliable and effective manner. JetNet
Switch
5010G comes with Rapid Super Ring Redundancy
Entry-Level
Management functions as well as many other cutting
Switch
edge technologies in software and hardware that makes it well-qualified for Coal Mining’s mission critical
requirements. JetNet 5010G was chosen and implemented for various reasons; one which is its flexibility. JetNet
5010G comes with 3 RJ-45/SFP combos for flexible networking distances from 100-Meter Cat-5 cable to 70-KM
Single-mode fibers. In addition, JetNet 5010G’s Rapid Super Ring has 5 ms of recovery time for redundancy as
Networking
Computer
Communication
Computer
well as Gigabit Ethernet - to ensure future net efficiency. In addition, they are also using Korenix’s serial device
JetPort 5604i because of its easy way to connect serial devices (i.e. tape loaders). The use of Korenix’s Ethernet
Ethernet
I/O Server
products in the mining industry has provided the customer with safe mining operations.
Serial Device
Server
Main Products
Media
Converter
JetNet 5010G Industrial 7+3G-port Gigabit
JetPort 5601
Managed Ethernet Switch
Multiport
JetPort 5604 Industrial 4-port Redundant Serial
Serial Card
Device Server
JetNet 5010G
SFP Module
Why Korenix
Din Rail
Flexibility - 7 10/100-TX ports and 3 Gigabit
RJ-45/SFP combo ports (10/100/1000 Base-TX, 100
GERXi
JetPort 5601
GERXi
JetPort 5604
Power Supply
Base-FX, 1000 Base-X)
Reliable - Multi-Form Rapid Super Ring (recovery
time <5ms), Dual Homing II, Multiple Ring, Any Ring
Mr. Stefan Zyczkowski
and RSTP
Astor
Convenience - JetPort 5604 series have four
Poland
serial interfaces, and all of the interfaces can be
configured with different serial interface types.
www.korenix.com
90
Electric Power Distribution
Extraordinary Solution to the Power Distribution Stability
With the rapid growth of the Taiwanese economy,
the electric power distribution is the essential issue
towards the industrial advance and the high living
standard of the household. Taiwanese power
company (Taipower), the heart of electricity
distribution in Taiwan, plays an important role of
providing electricity to its citizens. Taipower is
providing high quality electricity to people throughout
the HSIANG CHENG ELECTRONIC feeders with
Korenix reliable solutions - JetNet 4008f-s, JetCon
2301s. As the automation distribution downstream
levels of electric power systems rise electric
networking failure is unavoidable.
Taipower has adapted the Korenix JetNet4008f-s in its feeders to implement the Redundant Ethernet Super Ring,
which transmits the signals of DIO& AC to a monitor control system that results in a restore time of less than
20ms. Therefore, as the fault occurs, the monitoring officer is well aware of the location and is capable of isolating
the fault and shorten the damage control time with minimal loss time. From one station to another, HSIANG
CHENG ELECTRONIC has complemented the distance limitation of Ethernet networking with the Korenix
JetCon2301s. JetCon2301s is perfectly qualified while extending the transmission distance up to 30KM and also
prevents connection failure by Link Loss Forwarding (LLF).
Main Products
JetNet4008f-s Industrial 8-port Web-Managed
Ethernet Switch
JetCon2301-s Industrial Fast Ethernet to Fiber
Media Converter
Why Korenix
Solid - Rigid Aluminum Case Complies with IP31,
-10~70°C operating temperature, Redundant power,
DIN-Rail /Wall-Mounting /Desktop Installation
Supports VLAN/QoS/IGMP Snooping - VLAN
(Virtual LAN) provides many benefits when you plan
your network for Industrial applications and IGMP
Snooping- Deliver the right data to right place.
Link Loss Forwarding technology - For the easy
maintenance and time-saving, JetCon2301 features
remote Link Loss Forwarding technology.
91
www.korenix.com
Mr. Ji-Ren Chu
HSIANG CHENG
ELECTRONIC CROP.
Taiwan
Industrial Ethernet Switch
Surface Ship Systems for Detection Underwater
Detected the Objects Immersed by Sonar Floats
Floating Sonar detection systems are commonly
used by the French Navy in order to detect immersed
Industrial
PoE Switch
objects nearby. The detection systems are developed
to cover a great deal of operational requirements and
IP67/68
Ethernet Switch
normally compact enough to be installed on different
warships. To ensure the nonstop transmission of the
essential data collected from the underwater sonar
Rackmount
Managed
Switch
back to the control room in the cabin, it requires
not only high-speed gigabit Ethernet and fiber
Gigabit Switch
connection, but also the rapid ring recovery in case
Redundant
any link failure occurred. In addition, water-proof
Switch
and corrosive-resistant network equipments are
Entry-Level
indispensable for the severe maritime environment.
Switch
Therefore, JetNet5010G, the industrial 10-port managed switch was chosen in this project due to its flexibility
of using fast gigabit and SFP combo ports, with its rapid ring recovery time as low as 5ms. Korenix enhanced
Networking
Computer
protection of conformal coating on the switch board against corrosive an maritime atmosphere, and the immediate
Communication
technical support from Korenix team.
Computer
Ethernet
I/O Server
Serial Device
Server
Main Products
BAIE: cabinet
Switch Ethernet
JetNet 5010G Industrial 7+3G Gigabit Managed
Ethernet Switch
Media
1000 Base copper
Transceiver SFP1000SX
Converter
100 Base
copper
Multiport
Soner Link 100m
Why Korenix
Connector with
rotating joint
Flexibility - Adaptation of the firmware of the
Serial Card
SFP Module
JetNet 5010G
switch to the constraints of the application.
Din Rail
Solid - Rigid Aluminum Case Complies with IP31,
Power Supply
Curvilinear heat dispersing, Redundant power, DINMr. LEHMANN Philippe
APLUS-SA
France
Rail /Wall-Mounting /Desktop Installation.
Customization - Service of adding conformal
coating on switch board under reasonable budget
with a guarantee of 5 years.
www.korenix.com
92
Naval Sector
Sailing up the Network on Board
Integrated control technologies are becoming a new
trend in naval sector gradually where not only the
integrated network interface is often considered,
but also the rugged, anti-erosion and water proof
networked devices are indispensably required.
For example, many shipyards are beginning to
discover the great potential and take the most use of
the convenience and reliability of industrial Ethernet
aiming to integrate various interfaces and functions,
such as PLC systems related to navigation,
automation and control of the vessel and guarantee
a good standard of comfort on board with Safety and
Reliability.
The industrial Ethernet switch JetNet 4008 is chosen and deployed in this harsh environment firstly for its Ring
redundancy as the non-stop data transmission the IP 31 protection. Furthermore, JetNet 4008 also supports
VLAN/QoS/IGMP Snooping etc, featuring the multiple management functions under the efficient and effective
administration by the maintenance crew of navy sector.
Main Products
JetNet 4008 Industrial 8-Port Web-Managed
Ethernet Switch
PLC
Why Korenix
HMI
Solid - Rigid Aluminum Case Complies with IP31,
-20~70°C operating temperature, DIN-Rail /WallMounting /Desktop Installation
Redundant Power Inputs - Dual power inputs and
JetNet 4008
built-in reverse power polarity protection are designed
as the redundant power system to ensure your power
JetNet 2005
Alarm Relay Output - One relay output is an
important feature to let you know when there is any
event of port link down. Just move up the DIP switch,
the fault relay alarm will be functioning!
93
www.korenix.com
Mr. Enrico Cappochi
Technoteam
Italy
Industrial Ethernet Switch
GAS Distribution Station
Make the Delivery Controlled and Reliable
Natural Gas is a new trend of clean energy, and
it has become the mainstream power source for
Industrial
PoE Switch
public transportation, household uses…etc in major
metropolitans throughout the world. Reasons for
IP67/68
Ethernet Switch
adapting to Natural Gas from traditional sources of
power such as Nuclear Power or Coal Power are
for improving the polluted environments caused
Rackmount
Managed
Switch
by or as a result of global warming, air pollution,
chemical pollution, safety issues…etc. One of the
Gigabit Switch
most common and effective methods of transporting
Redundant
the Natural Gas is going through the underground
Switch
pipelines because Natural Gas are flammable,
Entry-Level
explosive and destructive.
Switch
So, the way to ensure the reliability and safety passage of pipeline absolutely is to build a control system which
Networking
is capable to monitor the conditions of distributive supporting equipments and gas pipeline systems. A gas
Computer
distribution company which secures the transmission of natural gas across Czech Republic and delivers it to
regional gas distribution companies, used JetNet 5010G in controlled gas delivery and regulation stations. Each
Communication
Computer
station works automatically and it is on-line monitored from the central control room while several measured dates
are stored in status server. The measurement units communicate via RS232 or RS422, where the JetPort 5601 or
Ethernet
I/O Server
JetPort 5604 is used.
Serial Device
Server
Main Products
Media
Control Room
JetNet 5010G Industrial 7+3G-port Gigabit
Converter
GPRS
Managed Ethernet Switch
GPRS
GPRS Ethernet Router
JetPort 5601 Industrial 1-port RS-232/422/485
Multiport
Serial Card
GPRS Ethernet Router
Ethernet
Redundant Serial Device Server
Serial
JetPort 5601
Ethernet
JetPort 5604 Industrial 4-port Redundant Serial
GMI
Gas Measurment Instrument
Device Server
GPRS
GPRS Ethernet Router
Serial
JetNet 5010G
Why Korenix
GPRS Ethernet Router
Gas Flow
Meter
GFM
Ethernet
JetPort 5604
SFP Module
Gas Flow
Meter
GFM
Din Rail
Power Supply
GMI
Flexibility - 7 10/100-TX ports and 3 Gigabit
Gas Measurment Instrument
MODBUS
RJ-45/SFP combo ports (10/100/1000 Base-TX, 100
Serial
PLC
GAS Distribution Station
Modbus RTU/TCP Converter
Base-FX, 1000 Base-X)
Rugged - Rigid Aluminum Case Complies with
IP31, Curvilinear heat dispersing, Redundant power,
Mr. Jaroslav Dedek (Left)
DIN-Rail /Wall-Mounting /Desktop Installation, Wide
Mr. Jaroslav Prokes (Right)
temperature -20~70°C
TECON
Reliable - Multi-Form Rapid Super Ring (recovery
Czech
time <5ms), Dual Homing II, Multiple Ring, Any Ring
and RSTP
www.korenix.com
94
Water Treatment System
Gigabit Networking & Surveillance System
Water Treatment describes the processes used to
make water more acceptable for a desired end-use.
These can include use as drinking water, for use in
industrial processes or to allow discharge into the
environment without ecological impact.
In China, the system integrator built up the water
treatment system by installing the Korenix Ethernet
switch connected with the PLC controlled the pump
status and formed a ring network to eliminate network
downtime, keeping information flowing at all times for
sending back to the control center.
With the JetNet 4508f can configure Enhanced Super Ring which is most stable topology of a system, the recover
time of Network is <20ms, and can build system redundancy for each station. Also it can be configure to use
with PLC and various kind of control unit. The JetNet 4508 Series designed under the consideration of abnormal
O
climate, so the operation temperature is –20 to 70 C degree , therefore it can be best solution for industrial field.
Main Products
JetNet 4508f Industrial 8-port Managed Ethernet
Control Center
Server
Rail Switch
On-site
Why Korenix
Redundant - Best with two DC24V input, and also
JetNet 4508f
compatible with range from 12V~48V.
Reliable - Recovery time<20 ms gives you faulttolerant connection. JetNet 4508 series also support
Dual Homing and Ring Coupling.
Full Management - Versatile and User-friendly
HMI
configuration interface, including SNMP, VLAN, QoS,
IGMP, event warning, etc.
PLC
Water Sensor
Pump
Miss Nona Zhang
Acitetch
China
95
www.korenix.com
Industrial Ethernet Switch
Korenix Industrial Product Selection Guide - Rackmount Managed Switch
JetNet 5228G
JetNet 5628G
(Preliminary)
Modular Managed Switch
Rockmount Managed Switch
Interface
Number of Ports:10/100TX
Number of Ports: 10/100/1000TX
Number of Ports: Fiber
(Multi Mode Fiber)
(Single Mode Fiber)
Max. 24
24
4
4
Max. 22 (18+4G)
4 (Gigabit)
100-FX/SC or SFP
SFP
10-120KM
10-120KM
100-240VAC
Console
Ac Power Input
100-240VAC
DC Power Input
18-48VDC *2
Power Consumption
Max. 35 Watts
Fault Relay Output
Fan
!
Max. 20 Watts
2 DI + 2 DO
Intelligent Fan Control
Fanless
44mm(H) x 431mm (W) x 340mm (D)
44mm(H) x 438mm (W) x 170mm (D)
Mechanical
1U Rack Mount
F.E. Module
Dimensions (unit=mm)
Operating Temperature
o
o
-25~70 C
-10~50 C
Rack-Mount Kit
Protocols
CLI/Web Configuration
JetView
Port Trunking
Network Redundancy
Multiple Super Ring
Multiple Spanning Tree Protocol
IGMP Snooping & IGMP Query
Tag-VLAN
Quality of Service
SNMP V1/V2C/V3
LLDP
Layer2+ ACL
HTTPS,SSH,Port/IP Security, 802.1x
Certifications
Regulatory Approvals:CE / FCC
RoHS / WEEE
www.korenix.com
96
Korenix Industrial Product Selection Guide - Managed Switch
JetNet 5010G
JetNet 5008G-P
Gigabit Managed Ethernet Switch / board
JetNet 4510
JetNet 4010
JetNet 4508 / 4508f
Managed Ethernet Switch
JetNet 4008 / 4008f
JetNet 4005
Web-managed Ethernet Switch
Interface
Number of Ports:10/100TX
Number of Ports: 10/100/1000TX
3 (Combo)
3 (Gigabit & 100FX)
Number of Ports: Fiber
(Multi Mode Fiber)
(Single Mode Fiber)
2 (Combo)
1(10/100/1000 RJ)
2 (Gigabit & 100FX)
3 SFP
2 (100FX)
2 (100FX)
3 SFP
Multi-mode SFP
Multi-mode SFP
Multi-mode SFP
JetNet 4508f-m
JetNet 4008f-m
Single-mode SFP
Single-mode SFP
Single-mode SFP
JetNet 4508f-s
JetNet 4008f-s
1
1
DC24V*2
(12~48)
-48(Option)
DC24V*2
(12~48)
-48(Option)
DC24V*2
(12~48)
-48(Option)
Power Jack
Power Consumption
Max. 11.5 Watts
Max. 10 Watts
5
3 (10/100TX Combo)
Multi-mode SFP
DC24V*2
(12~48)
-48(Option)
Power Terminal
8 (JetNet 4008)
6 (JetNet 4008f)
7
Single-mode SFP
1
Number of RS232 Console Port
8 (JetNet 4508)
6 (JetNet 4508f)
7
6
7
DC24V*2
(12~48)
-48(Option)
DC24V*2
(12~48)
-48(Option)
DC24V(12~48)
DC24V(12~48)
Max. 5.04 Watts (JetNet 4508) Max. 5.04 Watts (JetNet 4008)
Max. 7.68 Watts (JetNet 4508f) Max. 7.68 Watts (JetNet 4008f)
Max. 11.5 Watts
3.1 Watts
Fault Relay Output
!
1200VAC HIPOT
Mechanical
Rigid Aluminum Case
Case Protection
Dimensions (unit=mm)
IP 31
137(H) x 96(W) x 119(D)
IP 31
30(W) x 20(H) x 40(D)
IP 31
IP 31
137(H) x 96(W) x 119(D)
53(W) x 135(H) x 105(D)
o
Operating Temperature
o
-20~70 C
o
-25~70 C
o
-20~70 C
o
-20~70 C
IP 31
IP 31
53(W) x 135(H) x 105(D)
o
-20~70 C (JetNet 4508) -20~70 C (JetNet 4008)
o
o
-10~70 C (JetNet 4508f) -10~70 C (JetNet 4008f)
DIN-Rail Kit
Protocols
Web-based Configuration
JetView
HTTPS,SSH,Port/IP Security,802.1x
Super Ring, Couple Ring, Dual Homing
Rapid Super Ring (5ms) / Muliple Super Ring (5ms)
IGMP Snooping & IGMP Query
Tag & Port - Based VLAN
Tag VLAN
Tag VLAN
Tag VLAN
V1/V2C/V3
V1/V2C/V3
V1/V2C/V3
Quality of Service
SNMP V1/V2C
RMON1
SMTP(e-mail warning)
Syslog
Certifications
Regulatory Approvals:CE / FCC / UL
RoHS / WEEE
97
www.korenix.com
Tag VLAN
o
-20~70 C
(IP Security)
(IP Security)
Super Ring (20ms)
Super Ring (20ms)
Industrial Ethernet Switch
Korenix Industrial Product Selection Guide - Unmanaged Switch
JetNet 3018G
(Preliminary)
Value Add Ethernet Switch
JetNet 3010G
JetNet 3008
Value Add Ethernet Switch
JetNet 3008f
JetNet 3005 / 3005f
JetNet 2005 / 2005f
Compact Ethernet Switch
Entry-Level Ethernet Switch
Interface
Number of Ports:10/100Base-TX
16
7
8
Number of Ports: 10/100/1000TX
2 (Combo)
Port # 8.9 10/100/1000
Port # 10 1000
Number of Ports: Fiber
2 (SFP)
3 (Gigabit SFP)
(Multi Mode Fiber)
(Single Mode Fiber)
5 (JetNet 3005)
4 (JetNet 3005f)
6
5 (JetNet 2005)
4 (JetNet 2005f)
2 (100FX)
1 (100FX) (JetNet 3005f)
1 (100FX) (JetNet 2005f)
Multi-mode SFP
Multi-mode SFP
JetNet 3008f-m
JetNet 3005f-m
JetNet 2005f-m
Single-mode SFP
Single-mode SFP
JetNet 3008f-s
JetNet 3005f-s
JetNet 2005f-s
Number of RS232 Console Port
Power Terminal
DC24V*2
(12~48)
-48(Option)
DC24V*2
(12~48)
-48(Option)
DC24V*2
(12~48)
-48(Option)
DC24V*2
(12~48)
-48(Option)
Power Jack
Power Consumption
DC18~32V
AC18~27V
DC24V(12~48)
Max. 10 Watts
Max. 11.5 Watts
Max. 8Watts
Max. 12Watts
Max. 2.5 Watts (JetNet 3005)
Max. 3.7 Watts (JetNet 3005f)
Max. 3 Watts (JetNet 2005)
Max. 4 Watts (JetNet 2005f)
Fault Relay Output
1200VAC HIPOT
1500VAC HIPOT
1500VAC HIPOT
Mechanical
!
Rigid Aluminum Case
Case Protection
IP 31
IP 31
Dimensions (unit=mm)
96(W) x 145(H) x 139(D)
96(W) x 145(H) x 139(D)
Operating Temperature
-20~70 C
IP 31
IP 31
55(W) x 120(H) x 108(D)
IP 31
IP 31
53(W) x 135(H) x 105(D)
30(W) x 111.8(H) x 98.2(D)
o
o
o
-20~70 C
o
o
-25~70 C
-10~70 C
CE / FCC
CE / FCC
-20~70oC (JetNet 3005)
-10~70 C (JetNet 3005f)
o
-20~70 C (JetNet 2005)
o
-10~70 C (JetNet 2005f)
DIN-Rail Kit
Protocols
Web-based Configuration
JetView
Secured HTTPS,SSH
Super Ring, Couple Ring, Dual Homing
IGMP Snooping
Port VLAN
Quality of Service
SNMP V1/V2C
RMON1
SMTP(e-mail warning)
Syslog
Certifications
Regulatory Approvals:CE / FCC / UL
CE / FCC
CE / FCC
RoHS / WEEE
www.korenix.com
98
JetNet 5628G (Preliminary)
Industrial Modular Managed Ethernet Switch
3 modular slots design enable you to add up to 24 10/100-TX or
18 100Base-FX
4 On-Board Gigabit RJ-45/SFP combo ports support
10/100/1000 Base-TX, 1000 Base-X SFP
12.8G Non-Blocking Switching Performance and up to 16K MAC
Address table
IEC61850-3, IEEE1613 Power Substation Standard
Compatibility
Supports Jumbo Frame up to 9,216 bytes
RoHS
TM
Korenix Multiple Super Ring (Rapid Dual Homing, MultiRing ,
TM
TrunkRing , RSR, SR) and RSTP
Link Layer Discovery Protocol (LLDP), SNMPv3 and JetView
Discovering and Management
Advanced Security by 802.1x and Access Control List
Dual 100-240VAC and Dual 12-48VDC power input
Intelligent Temperature Monitoring and FAN Control
Overview
The JetNet 5628G is an Industrial Modular Managed
the switch supports 4 gigabit ports which allow users
Ethernet Switch, equipped with 3 sockets for
to trunk up to 8G uplink bandwidth or to form 2
maximum 24 10/100 Base-TX Ports or 18 100Base-
independent Gigabit rings. The switch also supports
FX Fiber interfaces ports plus 4 Gigabit RJ45 / MINI
Jumbo Frame forwarding up to 9.2Kbytes. The large
GBIC combo ports.
files transmitting in industrial environments becomes
The JetNet 5628G, a special design for substation
more efficient and solid.
automation and industrial control room, meets the
To fulfill the advanced management, control and
IEC61850-3, IEEE1613 high level environment
security in power substations and control rooms, the
certifications(pending). Dual high power, 100-240V
JetNet 5628G supports various software features.
AC module and 18-48VDC power input are flexible
The VLAN, QoS, IGMP, layer 2/4 Access Control List,
for field power constructions.
802.1x, SNMP V3, LLDP, etc. complete the demand
The advantage of choosing the JetNet 5628G is that
and greatly satisfy technicians’ requests.
IEC61850-3 / IEEE1633 Compatibility
99
In the substation environment, there are many EMI
automation.
& Environment Phenomena, such as the electric,
It defines the standard for the "Communication
magnetic, high energy power surge, uncontrolled
Networks and Systems in Substations". The
temperature & humidity...etc. When it comes to
IEC61850-3 defines the "General Requirements" for
the Ethernet for substation automation, the utility
the relevant equipments. The IEC1613 defines the
companies generally advise you comfort to the
“Standard Environmental and Testing Requirements
IEC61850 standard and IEC1613 standard. IEC
for Communications Networking Devices in Electric
61850 is standardized for the design of substation
Power Substations”.
www.korenix.com
Industrial Ethernet Switch
Flexible Module Design
The JetNet 5628G provides several types of Fast
types. The modular design is more flexible
Ethernet modules. There are 8 10/100Base-TX ports,
for purchasing, less storage of stock and field
4 100Base-FX/SC ports plus 2 100Base-FX SFP and
installations. Once the distance is over 100 meters,
4 10/100Base-TX plus 4 100Base-FX modules. Turn
users can exchange modules without replacing
off the power at the front on the switch and you are
device. As purchasing the JetNet 5628G, please
able to insert the modules or exchange the module
confirm the media type and the port volume.
Industrial
Naming Rule: JNM5-ABBCC/ABBCC
JNM5
A: Port Volume
PoE Switch
BB: RJ-45/Fiber
IP67/68
CC: Type of Fiber
Ethernet Switch
Connector
Rackmount
5: JetNet 5xxx
2: 2 Ports
TX: RJ45
SC: SC Connector
Managed
Series Module
4: 4 Ports
M: Multi mode
ST: ST Connector
Switch
8: 8 Ports
S: Single Mode
SFP: SFP socket
Gigabit Switch
Redundant
JetNet 5628G Modules:
Switch
JNM5-8TX:
Entry-Level
Switch
8 ports 10/100Base-TX module
Networking
Computer
JNM5–2SFP/4MSC:
2 ports 100Base-FX SFP + 4 ports 100Base-FX/SC Multi-mode
Communication
JNM5–2SFP/4SSC:
Computer
2 ports 100Base-FX SFP + 4 ports 100Base-FX/SC Single-mode
Ethernet
I/O Server
JNM5-4TX/4SFP: 4 ports 10/100Base-TX + 4 100FX-SFP
Serial Device
Server
Media
Intelligent Temperature & Fan Control
Converter
Multiport
The JetNet 5628G is designed with rack-mount
o
85 C
Serial Card
mechanical case. 5628G equips with 2 AC
SFP Module
power module and 2 DC inputs. The AC and
2 Internal
Thermal detector
DC power module can backup with each. It also
Din Rail
Power Supply
equips 2 thermo meter inside the box, it monitors
the temperature inside the box and allows you
to check the temperature inside. When the
environment becomes very heat and critical, the
FAN can be automatically or manually activated.
of the FAN becomes longer than continuously run.
In most environment, the rack is located in indoor
Should the environment becomes hot and the
rack, the temperature inside the rack is controlled
measured temperature inside is more than 85
and cool. Such environment is not such critical so
0C. The FAN will be automatically activated or
that the embedded FAN does not work. The lifetime
manually configure to cooler the temperature.
www.korenix.com
100
High Bandwidth and Performance
The JetNet 5628G supports 4 gigabit combo ports
What is Jumbo Frame?
and up to 9,216 bytes jumbo frame.
The typical Ethernet frame range is from 64 to 1518
Why 4 gigabit combo ports?
bytes. This is abundant for general usages. However,
Port Trunking with up to 8G bandwidth in full
duplex mode.
when users want to transmit large files, the files may
be divided into many small size packets. While the
To form 2 independent Rapid Super Rings directly.
Or to form one ring and trunk with another 5628G.
Using 2 Gigabit ports for forming rings, the other 2
transmitting speed becomes slow, 9KBytes Jumbo
frame can solve the issue.
Jumbo Frame examples:
for connecting to public servers.
Transmitting large files, like the size of the LCD’s
The Combo Ports Design saves stock of storing
bitmap type circuit may be up to 800MB.
different kinds of transceivers.
Network servers usually progress backups for
With dual gigabit rings, the JetNet 5628G can
large of files.
perform as the access-level switch.
4 GBE
Gigabit
R.S.R./RSTP
LACP Trunking
4 GbE
Gigabit
R.S.R./RSTP
Gigabit
R.S.R./RSTP
JetNet 5628G
Gigabit
R.S.R./RSTP
Dual
Gigabit
R.S.R
JetNet 5010G
JetNet 5010G
Multiple Super Ring Technology
The JetNet 5628G supports new generation ring
technology – MSR
TM
which includes various new
technologies for redundancy applications and
structures of different networks.
Multiple Super Ring
Rapid Super Ring
Rapid Dual Homing
MultiRing
Ring Master auto-select
Multiple Uplink Paths
Couple 2 rings with
Integrate Port Trunk/
Seamless restoration
One to One upper,
shared unit
LACP with MSR
Ring Failure alarms/LED
Many to One upper, one
Multiple up to 16 rings
Load balancing of ring Ports
Failed ring port together
to many upper and many
Tangent Ring Tech.,
Path Backup
with Ring Master
to many upper switches
4G for couple 2 Gigabit
Korenix Patent protected
Up to 5ms Recovery Time
Seamless restoration
rings
Backward compatible
Korenix Patent protected
Korenix Patent protected
with legacy Super Ring
101
TrunkRing
www.korenix.com
TM
, RSR
Industrial Ethernet Switch
Rapid Super Ring (RSR) Technology
Rapid Super Ring is the 2nd generation of Korenix
Ring Master
Ring Redundancy technology. The recovery time is
greatly improved from 300ms to few ms for both
copper and fiber ring. The Ring Master can be auto(1s
selected by the RSR engine. The 1st Ring Port of
t
JetNet 5628G
(2nd R
ing
Po
rt)
rt )
g Po
Rin
the R.M. is the primary path while the 2nd Ring Port
Rapid Super Ring
of the R.M. is the block path. Once the primary path
Industrial
fails, the 2nd path will be recovered within few ms.
PoE Switch
Besides, the restore time is also shortened to zero in
IP67/68
the R.M. auto-selection mode.
Ethernet Switch
JetNet 5010G
Rackmount
Managed
Switch
TM
Rapid Dual Homing (RDH ) Technology
Gigabit Switch
TM
Rapid Dual Homing (RDH ) replaces DualHoming II
and can be used for ring coupling. While keeping easy
Redundant
1-to1
connection
n-to1
connection
n-to-n
connection
Switch
configuration and multiple redundancies, the failover
Entry-Level
time is much faster (less than 50 ms) and the restore
Switch
time is ZERO (seamless restoration). Uplinks can
Networking
be auto detected and gathered into groups. In each
Computer
group, uplinks are sorted into Primary, Secondary,
Communication
and Standbys by their link speed. The uplink with the
Multi to Single
Computer
highest speed is more likely to be the active path for
Ethernet
data transmission. Link aggregation is also integrated
JetNet 5628G
I/O Server
TM
into RDH . An uplink can be a link or several
Serial Device
links aggregated as a trunk, which provides better
Server
redundancy and link capacity.
Media
Converter
MultiRingTM Technology
The MultiRing
TM
Multiport
Serial Card
is a new technology that constructs
SFP Module
coupling rings without controlling ports and achieves
different coupling structures by TangentRing
Gigabit
R.S.R./
RSTP
TM
Gigabit
R.S.R./
RSTP
Gigabit
R.S.R./
RSTP
technology which provides nod or path backup
Din Rail
Power Supply
JetNet 5628G
abilities.
With the MultiRing
TM
Technology, users can enlarge
JetNet 5010G
the network campus by applying different Ring IDs,
different from one to another, in order to get the
Ring ID=1
Ring ID=2
Ring ID=3
Ring ID=4
unlimited Ring Coupling ability.
www.korenix.com
102
Link Aggregation Control Protocol, TrunkRing
TM
Technology
Link Aggregation Control Protocol allows you to group
the backbone network. This is an inexpensive way
multiple Ethernet ports in parallel to increase the link
for users to transfer much more data. If the trunk port
bandwidth. The aggregated ports can be considered
is also assigned as a ring port, it will become as a
as one physical port, so that the bandwidth is higher
TrunkRing
than just one single Ethernet port. The member ports
ring path has increased with port trunk technology,
of the same trunk group can balance the loading
and there is no recovery time when failures occur.
and backup with each other. The LACP feature is
The JetNet 5628 provides a simple and easy way to
usually used when you need higher bandwidth for
aggregate port bandwidth into Rapid Super Ring.
TM
– which means that the bandwidth of
JetNet 5628G
JetNet 5628G
4 GbE
LACP
4 GbE
LACP
4 GbE
LACP
Link Layer Discover Protocol
The Link Layer Discover Protocol (LLDP) was
In industrial environments, most vendors provide
formally ratified as IEEE 802.1AB-2005. LLDP is
their own discovering protocol, window utilities or
the Layer 2 protocol that allows the network device/
other tools to manage their switches. The LLDP
station to advertise the connectivity & management
protocol fixes the interoperability among them.
information, the identity & major capabilities, receives
With LLDP supported, users can easily browse the
and establishes the network management information
network devices, establish the network management
on the same local network.
information schema of the stations.
Advanced Security by Layer 2/4 Access Control List
In substation automation or industrial control room
Processes with ACL
installation, the multi types of advanced security
features are required and must be implemented.
Incoming
The secured Access Control List (ACL) makes it
Packet
easy to limit certain devices communicating with
the other addressed devices and by the specific
protocol. Example rules include (1) the administrator
ACL Table
ACE 1
ACE 2
….…
…….
…….
Outgoing
Packet
Permit
Deny
to multiple stations, (2) stations to stations and (3)
stations to public servers…etc.
103
The ACLs provide “Permit” and “Deny” rules for any
are the operations which users prefer to control. The
or the specific host. The IP address, MAC address
JetNet 5628G is equipped with one layer 2+ switch
and port ID are the destinations allowed to be applied
fabric which provides flexible ACLs for the specified
the rules. The protocol ID, QoS tag, TCP flag…
subjects and operations within the same LAN.
www.korenix.com
Industrial Ethernet Switch
JetNet 5628G Appearance
2 AC, 2 DC input
2 DI, 2 DO, Console
Power Switch
Industrial
PoE Switch
IP67/68
Ethernet Switch
System LED
Module 1
(Port 1-8)
Module 2
(Port 9-16)
Module 3
(Port 17-24)
4 Gigabit
Combo (25-28)
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Dimensions (Unit –mm)
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
104
Specification
Technology
Standard:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-TX
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad LACP
IEEE802.1X Port based Network Access Control
IEEE802.1AB Link Layer Discovery Protocol
System Log: Supports both Local mode and Server mode
Network Redundancy
Switch Technology:
Store and Forward Technology, 12.8Gbps Wire-speed
Switching
System Throughput: 14,880pps for 10M Ethernet,
148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit
Ethernet
Transfer packet size: Typical: 64 bytes to 1536 bytes,
Jumbo Frame Enabled: Up to 9,216bytes
MAC Address: 16K MAC
Packet Buffer: 32Mbits
Relay Alarm: Dry Relay output with 1A@24V ability
Rapid Spanning Tree Protocol: IEEE802.1D-2004 Rapid
Spanning Tree Protocol. Compatible with Legacy STP and
IEEE802.1w
Multiple Super Ring (MSR)TM : New generation Korenix
Ring Redundancy Technology, Includes Rapid Super
Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM and
backward compatible with legacy Super Ring
Rapid Dual Homing (RDH)TM: Multiple uplink paths to one
upper switch or multiple upper switch
TrunkRingTM: Integrate port aggregate function in ring
path to get higher throughput ring architecture
MultiRingTM: Couple or multiple up to 16 Rapid Super Rings
Legacy Super Ring: Backward compatible in client mode
RTTD: Redundant to the Device, binding 2 ports together,
only one of the ports works, the other is backup port
Management
Interface
Configuration: Cisco-Like CLI, JetView, Web, HTTPS,
backup/restore, DHCP Client, Warm reboot, Reset to
default, Admin password, Port Speed/Duplex control, status,
statistic, MAC address table display, Static MAC, Aging
time, Jumbo Frame Enable/Disable
LLDP: Link Layer Discovery Protocol to advertise system/
port identity and capability on the local network
SNMP: SNMP v1, v2c, v3 and Traps.
SNMP MIB: MIB-II, Bridge MIB, VLAN MIB, SNMP MIB,
RMON and Private MIB
Port Trunk: Static Trunk and 802.3ad LACP , Up to 6 Trunk
Group, 8 ports per trunk
VLAN: IEEE802.1Q VLAN, GVRP. Up to 255 VLAN groups
Quality of Service: Four priority queues per port,
IEEE802.1p COS and Layer 3 TOS/DiffServ
IGMP Snooping: IGMP Snooping V1/V2/V3 for multicast
filtering and IGMP Query V1/V2
Rate Control: Ingress filtering for Broadcast, Multicast,
Unknown DA or All packets, step by 64kbps
NTP: Network Time Protocol to synchronize time from
Internet
IEEE1588 Precision Time Protocol (PTP): Average
convergence time is up to 100uS (micro-second)
Embedded Watchdog: Embedded hardware watchdog
timer to auto reset system when switch system failure
Port Mirroring: Online traffic monitoring on multiple
selected ports
Number of Fixed Gigabit Ports:
10/100/1000Base-TX: 4 x RJ-45, combo with SFP
1000Base-X: 4 x SFP with Hot Swappable
Number of Ports in Modules:
JNM5-8TX: 8 x 10/100Base-TX, Auto MDI/MDI-X, Auto
Negotiation
JNM5-2SFP/4MSC: 2 x 100Base-FX SFP plus 4 x 100BaseFX Multi mode
JNM5-2SFP/4SSC: 2 x 100Base-FX SFP plus 4 x 100BaseFX Single mode
JNM5-4TX/4SFP: 4 x 10/100Base-TX plus 4 100Base-FX
SFP
Cables:
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)
Diagnostic LED:
System: AC Power 1/2(Green), DC Power 1/2 (Green),
RDY(Ready) (Green), Digital Input 1/2(Green), Ring Master
(Green), Digital Output 1/2(Red), Ring Fail (Red)
10/100 RJ-45: Link/Activity (Green/Green Blinking)
Gigabit Copper/SFP: Link/Activity (Green/Green Blinking)
RS232 Console: DB9 Connector, Pin3: TxD, Pin2: RxD,
Pin5:GND
Power: 2 sets of AC inputs, 2 sets of DC inputs
Digital Input: 2 sets of Digital Input
logic low (0): 0-10VDC/Logic High(1): 11-30VDC
Alarm: 2 sets of Relay outputs for configurable events
Performance
105
Port Security: Assign authorized MAC to specific port
IP Security: IP security to prevent unauthorized access
802.1x: Port_based Network Access Control
Access Control List (ACL): Layer 2+ ACL Security
DHCP Option 82
DHCP Server: Can assign 255 IP address, support IP and
MAC binding
E-mail Warning: Automatic warning by pre-defined events
www.korenix.com
Industrial Ethernet Switch
Alarm Events: Power and Ports Failure, DI state, DO state,
Ping Failure, Super Ring Topology Change
Intelligent Temperature Monitoring: Automatically
monitoring the cabinet operating temperature
Intelligent FAN: Automatically activate when cabinet
O
Environmental
O
Operating Temperature: -25 ~70 C
Operating Humidity: 5% ~ 95% (non-condensing)
O
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.5KV for ports and power
operating temperature over 85 C or Manually control
Regulatory Approvals
Power Requirements
Power Automation: IEC 61850-3, IEEE 1613 (Pending)
EMI: FCC Class A, CE/EN55022. Class A
EMS: EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: UL, cUL, EN60950 (Pending)
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: Above 200,000 Hours, MIL-HDBK-217F GB
standard
Warranty: 5 years
Power: 2 sets of 100-240VAC power module,
2 sets of 18-48V DC power Inputs
Power Consumption: Maximum 35 Watts
Mechanical
Installation: 19-inch, 1U Rack Mount
Case: Aluminum metal case
Dimension: 44mm(H) x 431mm (W) x 340mm (D)
Weight: 3.5 kg with package
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Ordering Information
Gigabit Switch
JetNet 5628G Industrial Modular Managed Ethernet Switch
Includes:
Redundant
Switch
JetNet 5628G (Basic 4 Gigabit Combo Ports)
Entry-Level
Rack Mount Kit
Switch
Console Cable
Networking
Power Cord
Computer
Quick Installation Guide
Communication
Document CD
Computer
Additional Modules:
Ethernet
JNM5-8TX: 8 ports 10/100Base-TX module
JNM5–2SFP/4MSC: 2 ports 100Base-FX + 4 ports 100Base-FX/SC Multi-mode
I/O Server
JNM5–2SFP/4SSC: 2 ports 100Base-FX + 4 ports 100Base-FX/SC Single-mode
Serial Device
JNM5-4TX/4SFP: 4 ports 10/100TX + 4 100FX-SFP Socket
Server
Media
Converter
Optional Accessories
Multiport
Serial Card
100Base-FX Multi-Mode SFP Transceiver
SFP Module
100Base-FX Single-Mode SFP Transceiver
100Base-FX BIDI/WDM Single-Mode SFP Transceiver
Din Rail
Power Supply
Gigabit Multi-Mode SFP Transceiver
Gigabit Single-Mode SFP Transceiver
Gigabit BIDI/WDM Single-Mode SFP Transceiver
www.korenix.com
106
JetNet 5228G
24+4G Standalone Managed Ethernet Switch
24 10/100-TX and 4 Gigabit RJ-45/SFP combo ports
(10/100/1000 Base-TX, 1000 Base-X)
Design for the Building, Control Room and Telecom applications
24+4G Non-Blocking Switching performance
Supports Jumbo Frame up to 9,216 byte
802.1s Multiple Spanning Tree Protocol
Link Layer Discovery Protocol (LLDP), SNMPv3, SSL, SSH
management
RoHS
Advanced Security by 802.1x, Radius and Layer 2/4 Access
Control List
Advanced VLAN protocols, Protocol VLAN, Private VLAN and
VLAN stacking (QinQ) for telecom service provider
100-240VAC power input and Fan-less Design
Overview
The JetNet 5228G, a 19-inch 24+4G standalone
uplink bandwidth, load balancing, path protection, to
Managed Ethernet Switch, is equipped with 24
form network redundancy or apply MSTP to connect
10/100 Base-TX ports plus 4 Gigabit RJ45 / MINI
RSTP from different VLAN.
GBIC combo ports.
To fulfill the advanced management, control and
It is a special design for building, control room and
security requests in industrial buildings and control
telecom applications where request high-ports density
rooms, the JetNet 5228G supports various advanced
and performance. The device is mounted within the
software features. The protocol VLAN, private VLAN,
19 inch rack, along with other 19 inch public servers
VLAN stacking, QoS, IGMP Snooping, layer 2/4
or other network devices. It also supports Jumbo
Access Control List, 802.1x, SNMP V3, LLDP, etc.
Frame, forwarding up to 9.2Kbytes. Furthermore, the
complete the demand and greatly satisfy technicians’
transmission of large files in industrial environments
requests. Furthermore, the low power consumption
becomes more efficient and solid. The advantage
and the fan-less design enhance the benefits on the
of choosing the JetNet 5228G is that it supports 4
industrial requests.
gigabit ports which allow users to trunk up to 8G
High Bandwidth and Performance
JetNet 5228G supports 4 gigabit combo ports and up
to 8G bandwidth in full duplex mode.
to 9,216 bytes jumbo frame.
4 Combo Ports Design to save stock of storing
Why 4 gigabit combo ports?
different kinds of transceivers.
Act as the access switch, two gigabit ports for
lower network, one or two for upper connection.
2 Gigabit ports for forming rings, the other 2 for
connecting to public servers.
The upper connection can be aggregated with up
107
www.korenix.com
Industrial Ethernet Switch
High Bandwidth and Performance
What is Jumbo Frame?
The typical Ethernet frame is range from 64 to 1518
Jumbo Frame examples:
bytes. This is sufficient for general usages. However,
when users want to transmit large files, the files may
Transmitting large files, like the size of the LCD’s
bitmap type circuit may up to 800MB.
be divided into many small size packets. While the
Network servers usually progress backups for
transmitting speed becomes slow, 9.2KBytes Jumbo
large of files.
frame can solve the issue.
Industrial
PoE Switch
JetNet 5228G
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
The Large File is divided into many small packets
Before transferring
Gigabit Switch
Redundant
Type 1: Typical Ethernet Packet, maximum size is 1518 bytes
1518
bytes
JetNet 5628G
1518
bytes
1518
bytes
1518
bytes
1518
bytes
1518
bytes
Type 2: Jumbo Frame Packet, maximum size is 9216 bytes
Switch
Entry-Level
Switch
Networking
Computer
Public
Server
File
9216 bytes
Communication
Computer
Ethernet
I/O Server
802.1s Multiple Spanning Tree Protocol
Serial Device
Server
The JetNet 5228G supports 802.1s Multiple
Example: Instance 1 represent for VLAN 20. Instance
Spanning Tree Protocol (MSTP). The switch with
represent for VLAN 10.
MSTP enabled can select the root switch for each
In instance 1, there are one root and one blocking
instance, block and form the forwarding path for each
path. The VLAN 20 data can be transmitted from
instance. Each instance represents for one VLAN.
switch 3 to 1 to 2 or vise versa.
It is the limitation in STP/RSTP as the 2 traditional
In instance 2, there are another root and another
protocols only can block one path for all the existing
blocking path. The VLAN 10 data can be transmitted
VLANs in the same environment.
from switch 3 to 2 to 1 or vise versa.
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
3
JetNet 5228G
Instance 1 – VLAN 20
Forwarding Paths
Instance 1 – VLAN 20
Blocking
3
2
1
Instance 2 – VLAN 10
Blocking
Root
2
1
3
Instance 2 – VLAN 10
Root Switch
Instance 1 – VLAN 20
Root Switch
www.korenix.com
Instance 2 – VLAN 10
Forwarding Paths
Root
2
1
108
Advanced VLAN Features
JetNet 5228G is specially designed to meet the
Private VLAN
Telecom/Internet service provider’s requests. It
The private VLAN allows ISP to direct client ports'
provides many advanced VLAN protocols, Protocol
traffic to uplink port only. The uplink port to upper
VLAN, Private VLAN, VLAN stacking (QinQ) and
switch/router acts as the Primary VLAN. The client
Multicast VLAN Registration (MVR).
VLANs act as secondary VLAN. There are 2 types of
Protocol VLAN
secondary VLAN, isolated or community. The isolated
Protocol VLAN allows you to create VLAN for the
clients can only forwrd traffic to uplink port, they can't
specific L3 protocols’ packets, like the IP VLAN, IPX
communicate with other secondary VLANs. The
VLAN and AppleTalk VLAN. Different protocols' traffic
clients within the same community can forwrd traffic
is limited with the VLAN and can’t be forwarded to
to uplink port and communicate with other members
the other VLANs.
within the same community.
Multicast VLAN Registration (MVR)
Multicast VLAN Registration (MVR) is a useful
application to lower the multicast stream loading
Source
MVR Multicast VLAN
MVR Groups
of the source port. In traditional multicast program,
when hosts that belong to different VLANs require
the same multicast programs, the source station
copy the multicast data and forward to each VLANs
through the same router port. The result is waste of
the network bandwidth.
To solve this problem, you can enable the MVR
feature on 5228G. Assign the MVR multicast VLAN
ports. So that the hosts belongs to different VLANs
and available MVR multicast groups for the source
can receive the same multicast program but can’t
station. Configure the MVR source or receiver for the
communicate with each other.
Advanced Security by Layer 2/4 Access Control List
In industrial building and control room installations,
Processes with ACL
the multi types of advanced security features are
required and must be implemented. The secured
Incoming
access control list (ACL) makes it easy to limit certain
Packet
devices communicating with the other addressed
devices and by the specific protocol. Example rules
include (1) the administrator to multiple stations, (2)
ACL Table
ACE 1
ACE 2
….…
…….
…….
Outgoing
Packet
Permit
Deny
stations to stations and (3)stations to public servers…
etc.
109
The ACLs provide “Permit” and “Deny” rules for any
are the operations which users prefer to control. The
or specific host. The IP address, MAC address and
JetNet 5228G equipped with one layer 2+ switch
port ID are the destinations allowed to be applied
fabric which provides flexible ACLs for the specified
the rules. The protocol ID, QoS tag, TCP flag…
subjects and operations within the same LAN.
www.korenix.com
Industrial Ethernet Switch
Link Layer Discover Protocol
The Link Layer Discover Protocol (LLDP) was
In industrial environments, most vendors provide their
formally ratified as IEEE 802.1AB-2005. LLDP is
own discovering protocols, window utility or other
the Layer 2 protocol that allows the network device/
tools to manage their switches. The LLDP protocol
station to advertise connectivity & management
fixes the interoperability among them. With LLDP
information, the identity & major capabilities, receives
supported, users can easily browse the network
and establishes network management information on
devices and establish the network management
the local same network.
information schema about the stations.
Industrial
PoE Switch
IP67/68
Ethernet Switch
JetNet 5228G Appearance
Rackmount
Managed
Switch
Gigabit Switch
100-240VAC
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Console
System and
Port LED
Fast Ethernet
(Port 1-24)
4 Gigabit
Combo (25-28)
Computer
Ethernet
I/O Server
Serial Device
Server
Dimensions (Unit –mm)
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
110
Specification
Technology
Standard:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-TX
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE802.3ad Link Aggregation Control Protocol (LACP)
IEEE802.1X Port based Network Access Control
IEEE802.1AB Link Layer Discovery Protocol
IEEE802.1v Protocol-based VLAN
Performance
Switch Technology:
Store and Forward Technology, 12.8Gbps Wire-Speed
Switching
System Throughput: 14,880pps for 10M Ethernet,
148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit
Ethernet
Transfer packet size: Typical: 64 bytes to 1536 bytes,
Jumbo Frame Enabled: Up to 9,216bytes.
MAC Address: 8K MAC
Packet Buffer: 2Mbits
Management
Configuration: Cisco-Like CLI, Web, SSL, SSH, Backup/
Restore, DHCP Client, Warm reboot, Reset to
default, Admin password, Port Speed/Duplex control, status,
statistic, MAC address table display, Static MAC, Aging
time, Dual Firmware images
Jumbo Frame Enable/Disable: up to 9,216KBytes
LLDP: Link Layer Discovery Protocol to advertise system/
port identity and capability on the local network
SNMP: SNMP v1, v2c, v3 and Traps.
SNMP MIB: MIB-II, Bridge MIB, VLAN MIB, SNMP MIB,
RMON and Private MIB
SNTP: Simple Network Time Protocol to synchronize time
Port Mirroring: Online traffic monitoring
Port Trunk: Static Trunk and 802.3ad LACP , Up to 12
Trunk Group, 2-8 ports per trunk
Rate Control: Ingress and Egress rate limiting
VLAN: IEEE802.1Q VLAN, GVRP. Up to 255 VLANs
Private VLAN: Direct client ports to uplink port
Protocol VLAN: 802.1v Protocol based VLAN
VLAN Stacking: Double VLAN tag (QinQ)
Quality of Service: Four priority queues per port,
IEEE802.1p COS and Layer 3 TOS/DiffServ
IGMP Snooping: IGMP Snooping V1/V2 for multicast
filtering and IGMP Query
MVR: Multicast VLAN Registration
Port Security: Assign authorized MAC to specific port
IP Security: IP security to prevent unauthorized access
111
802.1x: Port_based Network Access Control
Access Control List(ACL): Layer 2+ ACL Security
RADIUS/TACACS Authentication, Authorization, Accounting
DHCP Option 82
E-mail Warning: Automatic warning by pre-defined events
Syslog: Message logged to flash with different policy
Network Redundancy
Rapid Spanning Tree Protocol: 802.1w RSTP, compatible
with Legacy STP
Multiple Spanning Tree Protocol: IEEE802.1s MSTP
each MSTP instance can include one or more VLANs.
Interface
Number of Fixed Gigabit Ports:
10/100Base-TX: 24 x RJ-45, Auto MDI/MDI-X, Auto
Negotiation
10/100/1000Base-TX: 4 x RJ-45, combo with SFP
1000Base-X: 4 x SFP with Hot Swappable
Cables:
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)
Diagnostic LED:
System: Power (Green), DIAG (Green)
10/100 RJ-45:
Link/Activity: Green = 100M, Yellow = 10M;
Duplex: On = Full, Off = Half
Gigabit Copper/SFP:
Link/Activity: Green = 1000M, Yellow = 10M or 100M;
Duplex: On = Full, Off = Half
RS232 Console: DB9 Connector, Pin3: TxD, Pin2: RxD,
Pin5:GND
Power: 1 sets of AC inputs
FAN-less
Power Requirements
Power: 100-240V AC power input
Power Consumption: Maximum 20 Watts
Mechanical
Installation: 19-inch, 1U Rack Mount
Dimension: 44mm(H) x 438mm (W) x 170mm (D)
Weight: 2.65 kg with package
Environmental
Operating Temperature: -10 ~ 50OC
Operating Humidity: 5% ~ 95% (non-condensing)
Storage Temperature: -40 ~ 70OC
Regulatory Approvals
EMI: FCC Class A, CE/EN55022. Class A
EMS: EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: cUL (CSA22.2, UL60950-1)
Shock: IEC60068-2-29
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
Warranty: 3 years
www.korenix.com
Industrial Ethernet Switch
Ordering Information
JetNet 5228G 19-inch 24+4G Industrial Managed Ethernet Switch
Includes:
JetNet 5628G (no SFP transceivers)
Rack Mount Kit
Power Cord
Console Cable
Quick Installation Guide
Industrial
PoE Switch
Document CD
IP67/68
Ethernet Switch
Optional Accessories
Rackmount
Managed
Switch
Gigabit Multi-Mode SFP Transceiver
Gigabit Single-Mode SFP Transceiver
Gigabit Switch
Gigabit BIDI/WDM Single-Mode SFP Transceiver
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
112
JetNet 5010G
Industrial 7+3G Gigabit Managed Ethernet Switch
7 10 / 100-TX ports and 3 Gigabit RJ-45/SFP combo ports
(10 / 100 / 1000 Base-TX, 100 Base-FX, 1000 Base-X)
Multiple Super Ring (recovery time <5ms), Rapid Dual Homing,
Multiple Ring, and RSTP
VLAN, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control,
Port Trunking, LACP, Online Multi-Port Mirroring
32Gbps Non-Blocking, 8K MAC address table
Supports console CLI , Web, SNMP V1/V2c/V3, RMON, HTTPS,
SSH and JetView
Advanced security feature supports IP Security, Port Security,
DHCP Server, IP and MAC Binding, 802.1x network access
RoHS
control
Event Notification by E-mail, SNMP trap, Syslog, Digital Input
and Relay Output
Rigid Aluminum Case complies with IP31, Great heat dispersing,
Redundant power
DIN-Rail/Wall-Mounting/Desktop Installation
o
-20~70 C operating temperature for hazardous environment
application
Overview
The JetNet 5010G is a Managed Industrial Ethernet
aluminum material, curvilineal heating dispersing
Switch, equipped with 7 ports 10/100TX and 3 ports
mechanical design and with wide operating
10/100/1000 RJ-45/100-FX/Gigabit SX/LX combo
temperature. The embedded software supports
ports. The 2 gigabit ports are used to form the nonstop
full Layer 2 management features, multi-form ring
Rapid Super Ring. The 3rd gigabit port is used
redundancy, network control, monitor, security and
to connect the upper switch, couple ring or public
notification. The JetNet 5010G also provides builtin
server. The gigabit combo port design giving flexibility
watchdog timer, digital input and relay output to
to choose copper or fiber media, 100Base-FX or
avoid undetected damage. With JetNet 5010G, you
1000Base-X, multi-mode or Single-Mode for different
can fulfill the dream of having the perfect solution to
distance and without stocking different switch models.
construct your industrial Ethernet infrastructure.
The JetNet 5010G is designed as rugged surface in
113
www.korenix.com
Industrial Ethernet Switch
3rd Gigabit Uplink for Flexible Network Planning
JetNet 5010G offers three Gigabit RJ-45/SFP
combos which improve the performance dramatically
compared to typical two Gigabit RJ-45/ SFP combos.
3rd gigabit uplink to
other network
Each combo comes with flexible connectivity,
100Mbps Single-Mode/Multi-Mode or 1000Mbps
Gigabit Rapid Super Ring
Single-Mode/Multi-Mode, as well as a copper
3rd gigabit to
connection. Now, end-users can achieve as many as
the public server
Industrial
PoE Switch
10 different combinations of port connections. Also,
by selecting a suitable range of fiber transceivers, the
IP67/68
JetNet5010G can fulfill your industrial applications at
Ethernet Switch
long distances.
Rackmount
Managed
Switch
Gigabit Switch
100 / 1000Mbps SFP Supported
Redundant
Switch
The JetNet 5010G SFP socket supports 100Base-
Entry-Level
FX Single/Multi-Mode and 1000Base-SX/LX/LHX/XD
Switch
Multi/Single-Mode transceiver. The available distance
Networking
of the 100Base-FX is up to 30KM. 1000Base-SX
Computer
Multi-Mode supports 550M, 1000Base-LX SingleCommunication
Mode supports 10KM, 1000Base-LHX Single-Mode
Computer
supports 30KM, 1000Base-XD Single-Mode supports
Ethernet
up to 50KM. 1000Base-ZX Single-Mode supports up
I/O Server
to 70KM.
Serial Device
Server
Media
Converter
Comprehensive Redundant Solutions —
TM
Multiple Super Ring (MSR )
The JetNet 5010G supports MSR
TM
(Multiple
The MSR
TM
SFP Module
connect with core management switch via standard
Super Ring) technology. This new technology
Rapid Spanning Tree Protocol or through multiple
includes various new features for different network
paths or nodes to increase the reliability of the Rapid
redundancy applications and structures. With the
Dual Homing (RDH ) Technology. By integrating
TM
technology, a node can be configured to
Serial Card
also facilitates the JetNet 5010G to
Super Ring); the new generation of RSR (Rapid
MSR
Multiport
Din Rail
Power Supply
TM
TM
MSR
and Link Aggregation Control Protocol (LACP),
multiple rings with the failover time in as little as 5ms
the JetNet 5010G can enhance the link availability
and ZERO-second of restore time. In addition, users
and increase the link capacity. Two or more Fast
can extend the ring topology by adding hundreds of
Ethernet connection are bundled in order to increase
JetNet 5010G to meet the network needs without
the bandwidth and to create a resilient and redundant
compromising the speed of the network.
links.
www.korenix.com
114
TrunkRingTM
TM
Symmetric TrunkRing
TrunkRing
TM
TM
Asymmetric TrunkRing
is a new feature in MSR
TM
which merges
the two technologies of RSR and link aggregation. It
takes advantage of aggregation to enhance the link
Symmetric TrunkRing
redundancy, while increasing the link speed. The ring
will open only if all the aggregated links are broken.
JetNet 5010G
Link aggregation can be achieved by either, static
trunk or LACP protocol. Not all the link sections in a
TrunkRing
TM
need to be the same. Ring links can be
either symmetric or asymmetric. Some are a single
link, and the others are aggregated by links where
the number of links in a trunk group can be different.
Users can enhance the link redundancy at different
locations in accordance to the need. And the link with
Asymmetric TrunkRing
less speed is more likely to be used as the backup
path for restoring the network to full play capacity.
JetNet 5010G
TM
MultiRing
MultiRing
TM
provides easier connectivity between
into a line or into multiple directions. In addition to
TM
has great diversity of various
two ring networks. The simplest example is to
extensibility, MultiRing
connect two rings by a single device. Depending
ring technologies. With MultiRing
on the number of ports, a device can even
can connect RSR rings, TrunkRing
gather multiple rings together. As shown in the
Super Ring together. Which provides extensibility to
figure, MultiRing
TM
technology simply extends
the network topology by linking multiple rings
TM
enabled, a device
TM
new technologies while keeps the great backward
compatibility.
JetNet 5010G
RSR
SR
Trunk
JetNet 5010G
Simply connect 2 rings by a device
115
and a ring of
JetNet 4508
www.korenix.com
Industrial Ethernet Switch
TM
Rapid Dual Homing (RDH ) Technology
TM
Rapid Dual Homing (RDH ) replaces DualHoming II
and Standbys by their link speed. The uplink with the
and can be used for ring coupling. While keeping easy
highest speed is more likely to be the active path for
configuration and multiple redundancies, the failover
data transmission. Link aggregation is also integrated
time is much faster (less than 50 ms) and the restore
into RDH . An uplink can be a link or several
time is ZERO (seamless restoration). Uplinks can
links aggregated as a trunk, which provides better
be auto detected and gathered into groups. In each
redundancy and link capacity.
TM
Industrial
group, uplinks are sorted into Primary, Secondary,
1-to1
connection
n-to1
connection
PoE Switch
1-to-n
connection
n-to-n
connection
trunk
connection
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Rapid
Dual
Homing
Gigabit Switch
Ethernet
Ethernet
Redundant
Switch
Entry-Level
Switch
JetNet 5010G
Networking
Computer
Communication
Computer
Ethernet
Ring
Coupling
I/O Server
Ethernet
Ethernet
Serial Device
Server
Media
Converter
JetNet 5010G
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
116
Various Network Control and Security Features
The JetNet 5010G provides various network control
Control Protocol (LACP), Rate Control. The security
and security features. The Network Control feature
also helps users to avoid hackers’ attack. The
allows users to optimize their industrial environment.
features included are, DHCP Server, IP and MAC
The supported features include VLAN, IGMP
Binding, 802.1x Access Control, SSH, IP Access
Snooping, Quality of Service (QoS), Link Aggregation
Table and Port Security.
Link Aggregation Control Protocol
Link Aggregation Control Protocol (LACP) allows
you to group multiple Ethernet ports in parallel to
increase the link bandwidth. The aggregated ports
LACP
can be considered as one physical port, so that the
bandwidth is higher than just one single Ethernet
port. The member ports of the same trunk group can
balance the loading and backup with each other.
The LACP feature is usually used when you need
higher bandwidth for the backbone network. This is
an inexpensive way for users to transfer much more
technology. Now, there is no recovery time when
data. If the trunk port is also assigned as a ring port, it
failures occur. The JetNet 5010G provides a simple
TM
will become as a TrunkRing , which means, that the
and easy way to aggregate port bandwidth into Rapid
bandwidth of ring path has increased with port trunk
Super Ring.
Port Security
Port Security is an enhanced security feature
to the port security table. After enabling this,
provided by JetNet 5010G. Port Security is also
only the PC with the available MAC address can
known as, “Port and MAC Binding”. The users
access the network through the switch. The other
can bind a specific MAC address to a specific
PCs can’t even pass the traffic through the port.
port, add the MAC and Port binding entry/entries
Network
Port 1
Port Security Table
Port
VID
Mac Address
Port 1
1
MAC B
PC A
MAC A
117
PC B
MAC B
www.korenix.com
PC C
MAC C
PC D
MAC D
Industrial Ethernet Switch
Easy-to-Configure Network Management Features
The JetNet 5010G also provides users many
Network
advanced management features. It can be configured
smartly by JetView, Web browser, SNMP, Telnet and
RS-232 console Command Line Interface (CLI).
RS-232
It provides Failure notification by E-mail, SNMP
Trap, System Log, Digital Input and Fault Relay. The
JetNet 5010G also supports Built-In Watchdog Timer
Industrial
JetView, Web,
SNMP, Telnet
for system recovering when detecting CPU failure.
PoE Switch
IP67/68
Ethernet Switch
Rackmount
JetView, Easy Management Utility
Managed
Switch
The JetView is a convenient tool to help
Gigabit Switch
administrators to discover the JetNet series Switches.
Redundant
It supports group IP assignment, group firmware,
Switch
upgrade, group configuration backup and restore.
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
A Built-in Watchdog Timer
I/O Server
Serial Device
With a Built-In Watchdog Timer, the JetNet 5010G
performs a warm boot (restarting the switch)
Server
Watchdog Timer
automatically when the switch system locks up. It
00:00:06
Media
Converter
saves the effort of maintenance for keeping network
alive if the switch can recover by itself.
CPU Failure = 6 sec
Multiport
=> Internal Reset
Serial Card
00:00:00
SFP Module
Din Rail
Power Supply
Robust Mechanism Design
Korenix JetNet 5010G's outstanding outlook is
quality, IP 31 class of protection, light weight, rigid
rock solid and fashionable with strong functionality.
shell and excellent thermal conductivity units can
Using aluminum extrusion case with industrial
operate under harsh industrial environment reliably.
www.korenix.com
118
JetNet 5010G Appearance
LEDs
SFP 8-10,
RJ45 8-10
LEDs
Power, DI, DO, R.M.
Rest
Console
SFP Socket
Din Rail Mounting
Din 35
(35mm
Fast Ethernet Port 1-7
10/100/1000 Base-T
Power Input, Digital In
Digital Output
Dimensions (Unit –mm)
119
www.korenix.com
Industrial Ethernet Switch
Specification
Technology
Network Redundancy
Standard:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-TX
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad LACP
IEEE802.1X Port_based Network Access Control
Rapid Spanning Tree Protocol: IEEE802.1D-2004 Rapid
Spanning Tree Protocol. Compatible with Legacy STP and
IEEE802.1w.
Rapid Super Ring(RSR): 2nd generation Korenix Ring
Redundancy Technology. Failure recovery within 5ms.
Rapid Dual Homing (RDHTM): Multiple uplink paths to
upper switches
TM
MultiRing : Couple or multiple Rapid Super Rings
Legacy Super Ring: Backward compatible in client mode
Interface
Performance
Switch Technology:
Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput: 14,880pps for 10M Ethernet,
148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit
Ethernet
Transfer packet size: 64 bytes to 1522 bytes (with VLAN
Tag)
MAC Address: 8K MAC
Packet Buffer: 1Mbits
Relay Alarm:Dry Relay output with 1A@24V ability
Management
Configuration: Cisco-Like CLI, JetView, Web, HTTPS,
SSH; TFTP/Web Update for firmware and configuration
backup/restore, DHCP Client, Warm reboot, Reset to
default, Admin password, Port Speed/Duplex control, status,
statistic, MAC address table display, Static MAC, Aging
time, SNMP v1, v2c, v3, Traps and RMON1.
SNMP MIB: MIB-II, Bridge MIB, VLAN MIB, SNMP MIB,
RMON and Private MIB
Port Trunk: Up to 5 Static Trunk and IEEE802.3ad LACP
VLAN: IEEE802.1Q VLAN, GVRP. Up to 64 VLAN groups
Quality of Service: Four priority queues per port,
IEEE802.1p COS and Layer 3 TOS/DiffServ
IGMP Snooping: IGMP Snooping V1/V2/V3 for multicast
filtering and IGMP Query V1/V2
Rate Control: Ingress filtering for Broadcast, Multicast,
Unknown DA or All packets, and Egress filtering for All
packets
NTP: Network Time Protocol to synchronize time from
Internet or local PC
Embedded Watchdog: Embedded hardware watchdog
timer to auto reset system when switch system failure
Port Mirroring: Online traffic monitoring on multiple
selected ports
Port Security: Assign authorized MAC to specific port
IP Security: IP security to prevent unauthorized access
802.1x: Port_based Network Access Control
DHCP Server: Up to 255 IP address, support IP and MAC
binding
E-mail Warning: Automatic warning by pre-defined events
System Log: Supports both Local mode and Server mode
Number of Ports: 10/100TX: 7 x RJ-45, Auto MDI/MDI-X,
Auto Negotiation
10/100/1000TX: 3 x RJ-45, combo with SFP
Gigabit Fiber/100Base-FX: 3 x SFP with Hot Swappable
Cables:
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)
Diagnostic LED:
10/100 RJ-45: Link/Activity(Green), Full duplex/Collision
(Yellow)
Gigabit Copper/SFP: Link/Activity(Green)
Unit: Power(Green), Digital Out(Red), Digital Input(Green),
R.M.(Green)
RS232 Console: RJ-45 Connector, Pin3: TxD, Pin6: RxD,
Pin5:GND
Power: 2 sets of power Inputs
Digital Input: 2 sets of Digital Input
Logic Low (0): 0-10VDC/Logic High(1): 11-30VDC
Alarm: 2 sets of Relay outputs for pre-defined events
Reset: Reset button is provided to restore default settings
Power Requirements
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
System Power: 12~48V/-12~-48VDC with Reverse Polarity
Protection
Power Consumption: 11.5 Watts @ DC 48V
Server
Media
Mechanical
Converter
Installation: DIN-Rail mount or Wall Mount
Case: IP-31 protection, aluminum metal case
Dimension: 137mm(H) x 96mm (W) x 119mm (D)
Multiport
Weight: 0.915kg with package
Serial Card
SFP Module
Environmental
O
Operating Temperature:-20 ~70 C
Operating Humidity: 0% ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.2KV for ports and power
Din Rail
Power Supply
O
Regulatory Approvals
EMI: FCC Class A, CE/EN55022. Class A
EMS: EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: UL/cUL 60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF:249,683 Hours, MIL-HDBK-217F GB standard
Warranty: 5 years
www.korenix.com
120
Ordering Information
JetNet 5010G Industrial 7+3G Gigabit Managed Ethernet Switch
Includes:
JetNet 5010G(without SFP transceiver)
Wall mounting plate
Quick Installation Guide
Documentation CD-ROM
Console cable
Optional Accessories
100Base-FX Multi-Mode SFP Transceiver
100Base-FX Single-Mode SFP Transceiver
100Base-FX BIDI/WDM Single-Mode SFP Transceiver
Gigabit Multi-Mode SFP Transceiver
Gigabit Single-Mode SFP Transceiver
Gigabit BIDI/WDM Single-Mode SFP Transceiver
121
www.korenix.com
Industrial Ethernet Switch
JetNet 5008G-P
Industrial 6+2G Gigabit Embedded Managed Switch Board
Independable Embedded Managed Switch Board with 200mm
(W) x 140mm(D) x30mm(H) board size
6 10/100Base-TX and 2 Gigabit RJ-45/SFP combo ports
Internal Gigabit Ethernet port for your system connectivity
11.5 Watts lower power consumption at DC48V
Industrial
PoE Switch
Watchdog timer for unexpected failure
TM
Supports Rapid Super Ring, MSR , RSTP, VLAN, GVRP, QoS,
IP67/68
Ethernet Switch
IGMP Snooping V1/V2/V3, Rate Control, Port Trunking, LACP,
RoHS
Online Multi-Port Mirroring
Supports Web, SNMP V1/V2c/V3, RMON, HTTPS and SSH
Rackmount
Managed
Switch
management
Advanced security feature supports IP Security, Port Security,
Gigabit Switch
DHCP Server, IP and MAC Binding, 802.1x network access
Redundant
control
Switch
Redundant Power Input DC12~48V
2 Dry Relay Output for Ethernet Switch
Entry-Level
Switch
Networking
Overview
Computer
Communication
The JetNet 5008G-P is an Embedded Managed
To enlarge your system value, JetNet 5008G-P
Switch Board, also known as EMSB. The board
provides abundant embedded value-added
is designed with six 10/100-TX and two RJ-45/
features. The layer 2 management features include
SFP combo front ports, one internal port for system
multi-form ring redundancy, network control,
connectivity and management. The EMSB is
management, monitor, security and notification.
specially designed to combine with your embedded
The JetNet 5008G-P also provides built-in watchdog
task-specific system. The board size is just 200mm
timer to avoid undetected damage. With JetNet
(W) x 140mm (D) x 30mm (H), giving flexibility and
5008G-P EMSB, you can easily integrate the board
compatibility in system integrating.
with your existing embedded system.
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
EMSB- Designed for Embedded System
Din Rail
Power Supply
JetNet 5008G-P is an Embedded Managed Switch
JetView. JetNet 5008G-P is also designed with dual
Board (EMSB), can easily apply to your task-specific
12-48VDC terminal block on board for low power
embedded system. 6 + 2 Gigabit RJ-45/SFP combo
requirements. The embedded power supply of the
front ports and one internal port can connect or
system can boot up the two independent systems
control the EMSB by Web UI, Telnet, SNMP and
easily.
www.korenix.com
122
A Win / Win Flexible OEM Solution
By providing a variety of tailor-made products and
distance. Our working experience and in-depth
services, Korenix, the pioneer of Industrial Ethernet
know-how of industrial networking communications,
switching, has the leading technology to fulfill your
has enabled us to combine Taiwan’s research/
needs and demands. Our business goal is to let our
development ability with competitive production cost;
customers spend less time and less money on their
hence, producing the most high performing and cost
applications.
effective product in the market.
We offer switch board OEM/ODM services, including
All Korenix products not only include a five years
conformal coating for hazardous environment as well
warranty, but a life-time online tech supports from
as wide-ranged fiber connection for lengthy network
experienced and well-trained technicians.
Non-Stop Network Transmission
A key element of a perfect embedded board is its
With Rapid Super Ring, your network data is always
reliability and compatibility. The JetNet 5008G-P is
transferred between switches via Gigabit ports with
highly compatible with every vendor’s equipment
failover time in as low as 5ms; most importantly,
currently available in the market. Every JetNet
the security of your data is never jeopardized.
5008G-P comes with a built-in watch dog timer to
Furthermore, JetNet 5008G-P always remains
maintain a non-stop operation. With RSTP over Rapid
operational from the disturbance of vibration, impact
Super Ring (RSR) and Dual Homing II technology,
of shock, and environment of hazardous temperature
the JetNet 5008G-P will automatically select an
(-20~70 C). Taking advantages of JetNet 5008G-P
alternative route to transmit the data if the original
can help you to build up a network that is technically
route has been blocked and notify the administrator
impossible to disconnect.
O
simultaneously.
Easy-to-Configure Managing Software
JetNet 5008G-P switch board fully supports many
development simultaneously. With Rapid Super Ring,
known network management software such as HP
your network data is always transferred between
Open View, MG-Soft, SNMPc, and the leading OPC
switches via Gigabit ports with failover time in as low
server – Kepware’s KEPServerEX. It provides users
as 5ms; most importantly, the security of your data
with many advanced managed functions including
is never jeopardized. Furthermore, JetNet5008G-P
SNMP v1/v2c/v3, IGMP snooping v1/v2/V3, VLAN,
always remains operational from the disturbance
QoS, Rate control, Port Trunk, LACP, 802.1x, DHCP
of vibration, impact of shock, and environment
Server, Port security and IP security, and more. These
of hazardous temperature (-25~70 C). Taking
functions can be configured easily by CLI, SNMP and
advantages of JetNet 5008G-P can help you to
web browser. JetNet 5008G-P will fulfill your system
build up a network that is technically impossible to
requirements and network needs, and our software
disconnect.
O
will save you time and efforts for your product
123
www.korenix.com
Industrial Ethernet Switch
Power Consumption
The JetNet 5008G-P has an incredibly low power
Input, 12~48V/-12~-48V DC with Reserve Polarity
consumption of 11.5 Watts at DC48V and Dual Power
Protection.
System Reliability
Watch Dog Timer is the network lifeguard that has a
occurs, it will perform a warm boot to restart on the
separate CPU watching over the switch. When the
switch; thus the recovery action will save time &
switch is locked up or any type of network failure
efforts for network administrator.
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
JetNet 5008G-P Appearance
Switch
Gigabit Switch
Redundant
Switch
10/100/1000 Base-T
Entry-Level
Reset
Fast Ethernet
Port 1 ~ 6
Power Input
Switch
Networking
2 Combo Ports
10/100/1000Base-T
SFP Socket
LEDs
Power
Combo SFP/RJ45
Internal RJ45
Mounting Hole
Computer
Communication
Computer
Ethernet
I/O Server
Dimensions (Unit=mm)
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
124
Specification
Technology
Standard: IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-TX
IEEE 802.3z Gigabit Ethernet Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad LACP
IEEE802.1X Port_based Network Access Control
Performance
Switch Technology: Store and Forward Technology
with 32Gbps Switch Fabric
System Throughput: 14,880pps for 10M Ethernet,
148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit
Ethernet
Transfer packet size:
64 bytes to 1522 bytes (with VLAN Tag)
MAC Address: 8K MAC
Packet Buffer: 1Mbits
Transfer performance: 14,880pps for Ethernet and
148,800 for Fast Ethernet and transfer packet size from 64
to 1522Bytes.
Management
Configuration: Cisco-Like CLI, Web, DHCP Server/Client,
warm reboot, reset to default, Admin password, Port Speed/
Duplex Control, status, statistic, MAC address table display,
static MAC, Aging time, SNMP v1, v2c, v3, Traps and
RMON1
SNMP MIB: MIB-II, Bridge MIB, VLAN MIB, SNMP MIB,
RMON and Private MIB
Port Trunk: Up to 5 Static Trunk and 802.3ad LACP
VLAN: 802.1Q VLAN, GVRP. Up to 64 VLAN groups
Quality of Service: Four priority queues per port, 802.1p
COS and Layer 3 TOS/DiffServ
IGMP Snooping: IGMP Snooping V1/V2/V3 for multicast
filtering and IGMP Query V1/V2
Rate Control: Ingress filtering for Broadcast, Multicast,
Unknown DA or All packets and filtering for All packets.
NTP: Network Time Protocol to synchronize time from
internet or local PC
Embedded Watchdog: Embedded hardware watchdog
timer to auto reset system when failure occurred
Port Mirroring: Online traffic monitoring on multiple
selected ports
Port Security: Port security to assign authorized MAC to
specific port
IP Security: IP security to prevent unauthorized access
802.1x: Port_based Network Access Control
Ordering Information
DHCP Server: Up to 255 IP address, support IP and MAC
binding
E-mail Warning: SMTP warning by pre-defined events
System Log: Supports both Local mode and Server mode
Network Redundancy
Rapid Spanning Tree Protocol:
IEEE802.1D-2004 Rapid Spanning Tree Protocol.
Compatible with Legacy STP and IEEE802.1w.
TM
Multiple Super Ring(MSR ): 2nd generation Korenix Ring
Redundancy Technology. Failure recovery within 5ms.
Rapid Dual Homing (RDHTM): Support multiple node to
node, multiple path to one node to obtain more flexible and
reliable architecture
TM
TrunkRing : Provides port aggregate function in ring
path to get more bandwidth for higher throughput ring
architecture
Multiple Ring: New generation of ring coupling technology
without extra control port - TangentRing
Interface
Number of Ports:
10/100TX: 6 x RJ-45, Auto MDI/MDI-X, Auto Negotiation
10/100/1000TX: 2 x RJ-45 on front side, 1 x inner port.
SFP: 2 x Hot- Swappable SFP and combo with Gigabit
RJ-45
Cables: 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable,
EIA/TIA-568 100-ohm (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable,
EIA/TIA-568 100-ohm (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5, Cat-5e cable,
EIA/TIA-568 100-ohm (100m)
LED Indicators: 2 x Power (Green)
2 x SFP Link/Activity (Green)
Inner Port Link/Activity (Green)
System Power: 2 sets of power Input within 4-pin
removable terminal block
Reset: Reset PIN is provided to restore default settings
Relay: 2 Dry relay outputs with 1A/DC24V carry ability
Reset: Internal connector is provided for chassis installation
Power Requirements
System Power: Dual Power Input, 12~48V/-12~-48V DC
with Reverse Polarity Protection
Power Consumption: About 11.5 Watts @ DC 48V
Mechanical
Dimension: 30mm(H) x 200mm (W) x 140mm (D)
Weight: 0.50kg without package and case
Environmental
O
Operating Temperature:-25 ~70 C
Operating Humidity: 0% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.2KV for all ports and power
O
Regulatory Approvals
MTBF: 249,683 Hours, MIL-HDBK-217F GB standard
Warranty: 5 years
JetNet 5008G-P 6+2G Gigabit Embedded Managed Switch Board
Includes:
JetNet 5008G-P (without SFP transceiver)
Documentation CD-ROM
125
www.korenix.com
Industrial Ethernet Switch
JetNet 3018G (Preliminary)
Industrial 16+2G Gigabit Ethernet Switch
16 10/100TX and 2 Gigabit copper/SFP combo ports
Auto detect Gigabit Link Media
Flexible Gigabit Fiber Link Distance
High performance up to 12.8Gbps non-blocking bandwidth
Supports Auto MID/MDI-X with Flow control
Industrial
PoE Switch
Jumbo Frame up to 9,216 Bytes
IEEE802.1p for Quality of Service (QoS)
IP67/68
Ethernet Switch
Power redundancy with wide range input
Relay Output Alarm for Gigabit uplink ports failure
Rigid IP31 grade Aluminum Case
Rackmount
Managed
Switch
o
-20~70 C operating temperature for hazardous environment
RoHS
Gigabit Switch
application
Redundant
Switch
Overview
Entry-Level
Switch
The Korenix JetNet3018G is an unmanaged Industrial
transmission, up to 9216-bytes packet size, which
Switch, equipped with 16 RJ-45 10/100Mbps ports
is crucial especially while the industrial applications
and 2 10/100/1000TX with 1000-SX SFP combo
requesting the transmission with large size files. The
ports. The SFP ports accept all types of Gigabit
JetNet 3018G adopts the rigid aluminum case, the
SFP Transceivers, such as Gigabit SX, LX, LHX,
unique Korenix-Design, which is the right option for
ZX and XD for several connections and distances.
the hazardous environments.
Networking
Computer
Communication
Computer
Ethernet
I/O Server
The JetNet 3018G also supports Jumbo frame
Serial Device
The Flexible Gigabit RJ-45/SFP Combo Ports
Server
Media
Converter
The JetNet 3018G is equipped with two Gigabit
of the Gigabit cable connections for each Gigabit
RJ-45/SFP combo ports. Each Gigabit port combines
port. The fiber SFP module with various ranges of
Multiport
a small form factor pluggable SFP (mini-GBIC
fiber transceivers is capable to fulfill the tailor made
Serial Card
port to accommodate 1000Base-SX or 1000Base-
industrial applications greatly. Moreover, Korenix
LX connectivity) and a RJ-45 Gigabit copper port.
equips 2 relay outputs to deliver alarms while the
The switch will automatically detect the priority
Gigabit RJ-45/SFP ports failing.
SFP Module
Din Rail
Power Supply
High Performance and Jumbo Frame
The JetNet 3018G supports 16 Fast Ethernet
transmission. Considering the industrial application
ports plus 2 Gigabit uplink ports which can provide
requirements, the JetNet 3018G enables the Jumbo
12.8G non-blocking bandwidth and performance.
frame supported by default. The jumbo frame, which
The gigabit interface is used to act as the uplink
is up to 9,216 bytes, divides the large files into less
path as the lower 10/100 ports have bigger uplink
packet frames. Thus, the gaps between the frames
bandwidth. Unlike pure 10/100 High Ports Switch, the
become fewer, and the packet transmitting becomes
uplink ports may not easily be the bottleneck of the
more efficiency.
www.korenix.com
126
Quality of Service
The JetNet 3018G focuses on the entry level
The IEEE802.1p Quality of Service (QoS) mechanism
applications which allocate numerous Fast Ethernet
enlarges and extends the performance of networking
devices and provide higher bandwidth to Gigabit
transmissions on the field sites.
Backbone Switch.
Hazardous Environment Application
To survive in harsh environments, the JetNet3018G
Furthermore, Korenix also delivers you the certified
is well-designed with the wide range redundant
SFP fiber transceivers with the same operating
power input with rigid housing, supporting the IP31
temperature for the JetNet 3018G and saves the
o
aluminum case with -20~70 C system operating
purchase time consuming without quality concerns
temperature, providing excellent heat radiation.
and issues.
Dimensions (Unit –mm)
127
www.korenix.com
Industrial Ethernet Switch
Specification
Technology
Diagnostic LED:
System Power: Power 1 (Green), Power 2 (Green)
Relay Output: Relay Output 1 (Red), Relay Output 2 (Red)
10/100 Mbps RJ-45 port: Link (Green/Left), Activity(Yellow
Blinking/Right)
1000Base-T RJ-45 port: 10/100 Link (Green/Left), 1000 Link
(Yellow/Right), Activity (Green Blinking/Yellow Blinking)
Standard:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet
IEEE802.3x flow control and back pressure
IEEE802.1p Class of Service
Switch Technology:
Store and Forward Technology, up to 12.8Gbps High
System Throughput
MAC Address: 8K MAC address table
System Packet Buffer: 2Mbits shared packet buffer
Jumbo Frame: Enable Jumbo Frame, Up to 9,216 bytes
Quality of Service: Compliance with IEEE802.1p class
of service with Tag Based Priority rule.
Each switch port provides 4 priority queues as following 8 (Higher) : 4(High) : 2(Low) :1(Lower) scheduling.
The Tag Priority ID as following: Highest (6,7), High (4,5),
Low (0,3), Lowest (1,2)
SFP port: Link/Activity (Green/Green Blinking)
Industrial
Power Requirements
System Power: 4 pins terminal block for power input.
DC 24V (12~48V) with polarity reverse protection and
redundant function
Power Consumption: 10Watt
Mechanical
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Installation: DIN-Rail or Wall mount
Case:
Aluminum metal case with IP31 grade case protection for
drop-waterproof and dustproof
Dimension: 137mm(H) x 96mm (W) x 119mm (D)
Weight: 1kg without package
Managed
Switch
Gigabit Switch
Redundant
Switch
Interface
Environmental
Number of Ports: 16 x 10/100 Base-TX with Auto MDI/
MDI-X function, ,Auto-Negotiation
2 x 1000Base-T supports Auto MDI/MDI-X , AutoNegotiation function and combo with Small Form Factor
Package (SFP) socket
Connectors:
10/100 Base-TX: RJ-45
1000Base-T: RJ-45
SFP: supports all 3.3v SFP type Gigabit fiber transceiver
Power: 4-Pin Removable Terminal Block
Relay Output: 4-Pin Removable Terminal Block
Cables:
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded
twisted pair or shielded twisted pair cable. The maximum
link distance is 100 meters
Operating Temperature: -20 ~70 C
Operating Humidity: 0% ~ 90%, (non-condensing)
Storage Temperature: -40 ~ 80 C
Storage Humidity: 0%~ 95%, (non-condensing)
Hi-Pot: 1.5KV on port to port and port to power
O
Entry-Level
Switch
O
Networking
Computer
Regulatory Approvals
Maritime: DNV(Pending)
EMI: FCC Class A, CE/EN55022
EMS:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: At least 200,000 hours @ 25 C
Warranty: 5 years
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
O
Media
Converter
Multiport
Serial Card
Ordering Information
Optional Accessories
JetNet 3018G!Industrial 16+2G Gigabit
Gigabit Multi-Mode SFP Transceiver
Ethernet Switch
Gigabit Single-Mode SFP Transceiver
Includes:
Gigabit BIDI/WDM Single-Mode SFP Transceiver
SFP Module
Din Rail
Power Supply
JetNet 3018G
Quick Installation Guide
CD User’s manual
www.korenix.com
128
JetNet 3010G
Industrial 10-port Gigabit Ethernet Switch
7 10/100 TX ports and 3 Gigabit RJ-45/SFP combo ports
32Gbps Switch Fabric with excellent data exchangeper formance
Support 1.2KV Hi-Pot isolation protection
Redundant power input DC 12~48V
Auto Gigabit RJ-45/SFP module detection
IEEE 802.1p for Quality of Service (QoS)
Aluminum case with IP-31 grade protection
o
-20~70 C operating temperature for hazardous environment
application
RoHS
Overview
The Korenix JetNet 3010G is an Unmanaged
of SFP types Gigabit SFP Transceiver, which could
Industrial Switch, which is equipped 7 ports RJ-45
be Gigabit SX, LX, LHX, ZX and XD for several of
10/100Mbps and 3 ports Gigabit TX with SFP combo.
connections and distances.
The SFP ports are compatible with accept all
Flexibility — 1000Mbps SFP / Combo Ports
The 3 combo ports lead to the flexibilities and the
conveniences for additional fiber connections with
just plug-in different types of SFP modules, from
2KM multi-mode to 120KM single-mode. The combo
ports also make the port-combination easier, such
as 8 RJ ports and 2 fiber ports, or 9 RJ ports and 1
fiber port. The standard 10 port Fast Ethernet Switch
greatly shortens normal long lead time by the special
fiber switch model and reduces the total cost for fiber
uplink network.
Quality of Service (QoS)
JetNet 3010G focus on the cost effective application
The 3.2Gbps Switch Fabric and IEEE802.1p Quality
which allocates lot of Fast Ethernet devices and
of Service (QoS) mechanism enlarge and extend
provides higher bandwidth to Gigabit Backbone
filed site network transmission performance.
Switch or JetNet 3010G Gigabit Rapid Super Ring.
129
www.korenix.com
Industrial Ethernet Switch
Brilliant Idea for Hazardous Environment Application
Robust Mechanism Design
Korenix JetNet 3010G's outstanding outlook is rocksolid and fashionable with strong functionality. The
Warm Air
special fan-less heating dispersing mechanical design
adapts the thermodynamic technique to ventilate
heat generated from Ethernet module efficiently.
Industrial
Using aluminum extrusion case with industrial quality,
PoE Switch
IP 31 class of protection, light weight, rigid shell and
IP67/68
excellent thermal conductivity units can operate
Ethernet Switch
under harsh industrial environment reliably.
Rackmount
Managed
Cool Air
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Dimensions (Unit –mm)
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
130
Specification
Technology
Diagnostic LED:
System Power: Power 1 (Green), Power 2 (Green)
10/100 Mbps RJ-45 port: Link/Activity (Green), Full Duplex/
Collision (Yellow)
port: Link/Activity(Green)
1000Base-T RJ-45 port: Link/Activity (Green)
SFP port: Link/Activity (Green)
Standard:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet Fiber
IEEE802.3x flow control and back pressure
IEEE802.1p Class of Service
Power Requirements
Performance
Switch Technology:
Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput: 14,880pps for 10M Ethernet,
148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit
Ethernet
Transfer packet size: 64 bytes to 1522 bytes (with VLAN
Tag)
MAC Address: 8K MAC address table
System Packet Buffer: 1Mbits shared packet buffer
Quality of Service:
Compliance with IEEE802.1p class of service with
Tag Based Priority rule Per switch port provides 4
priority queues with 8 (Higher):4(High):2(Low):1(Lower)
scheduling. The Tag Priority ID as following: Higher (6,7),
High (4,5), Low (0,3), Lowest (1,2)
Interface
Number of Ports:
7 x 10/100 Base-TX with Auto MDI/MDI-X function
Auto-Negotiation
3 x 1000Base-T supports Auto MDI/MDI-X , AutoNegotiation function and combo with Small Form Factor
Package (SFP) socket
Connectors:
10/100 Base-TX: RJ-45
1000Base-T: RJ-45
Port # 8, 9 10/100/1000 TX
Port # 10 1000 TX
SFP: supports all 3.3v SFP type Gigabit fiber transceiver
Power: 4-Pin Removable Terminal Block connector
Cables:
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded
twisted pair or shielded twisted pair cable. The link distance
is maximum 100 meters
System Power:
4 pins terminal block for power input.
DC 24V (12~48V) with polarity reverse protection and
redundant function
Power Consumption:
11.5 Watts @ DC 24V(Maximum)
Mechanical
Installation: DIN-Rail or Wall mount
Case:
Aluminum metal case with IP31 grade case protection for
drop-waterproof and dustproof
Dimension: 137mm(H) x 96mm (W) x 119mm (D)
Weight:
0.875g without package
Environmental
O
Operating Temperature: -20 ~70 C
Operating Humidity: 0% ~ 90%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Storage Humidity: 0%~ 95%, (non-condensing)
Hi-Pot: 1.2KV for port and power
O
Regulatory Approvals
EMI: FCC Class A, CE/EN55022
EMS:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: UL/cUL 60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 267380 hours @ 25 C
Warranty: 5 years
O
Ordering Information
Optional Accessories
JetNet 3010G!Industrial 10-Port Gigabit Ethernet Switch
Gigabit Multi-Mode SFP Transceiver
Includes:
Gigabit Single-Mode SFP Transceiver
JetNet 3010G(without SFP transceiver)
Gigabit BIDI/WDM Single-Mode SFP Transceiver
Quick Installation Guide
CD User’s manual
131
www.korenix.com
Industrial Ethernet Switch
JetNet 4510
Industrial 10-port Managed Fast Ethernet Switch
7 10/100 Base TX and 3 RJ-45/SFP combo (10/100BaseTX, 100Base-FX )
Multiple Super Ring (recovery time <5ms), Rapid Dual Homing,
Multiple Ring, and RSTP
VLAN, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control,
Industrial
PoE Switch
Port Trunking, LACP, Online Multi-Port Mirroring
32Gbps Non-Blocking, 8K MAC address table
IP67/68
Ethernet Switch
Supports console CLI , Web, SNMP V1/V2c/V3, RMON, HTTPS,
SSH and JetView
Advanced security feature supports IP Security, Port Security,
Rackmount
Managed
Switch
DHCP Server, IP and MAC Binding, 802.1x network access
RoHS
Gigabit Switch
control
Event Notification by E-mail, SNMP trap, Syslog, Digital Input
Redundant
and Relay Output
Switch
Rigid Aluminum Case Complies with IP31, Redundant power,
DIN-Rail/Wall-Mounting/Desktop Installation
Entry-Level
Switch
Networking
Computer
Overview
Communication
Computer
JetNet 4510 is an industrial Managed Fast Ethernet
In addition to cost savings, the flexible design of the
Switch, designed with 7-10/100TX and 3-10/100
JetNet 4510 can adapt to the world's fastest Ring
RJ-45 / 100FX SFP combo ports.
Technology by Korenix. It only takes 5ms to recover
The flexible 3 combo ports offer flexibility for
from link failure, no matter how many nodes are
additional fiber connections by plugging different
inside a ring, and the restore time is zero when the
types of 100MM SFP modules, which can support
failed link is recovered. The patented Multiple Super
Media
2KM in Multi-Mode or 120KM in Single-Mode. The
Ring provides the most flexible ring topologies,
Converter
combo ports make port combination even easier,
such as shared link of multiple rings, or shared unit
Multiport
such as 8 RJ ports and 2 fiber ports, or 9 RJ ports
of multiple rings, making it the best possible. The
Serial Card
and 1 fiber port. The standard 10 port Fast Ethernet
Multiple Super Ring is highly compatible to Rapid
switch greatly reduces total cost by up to 15% for
Spanning Tree by the new Dual Homing plus design.
fiber uplink network.
JetNet 4510 also enhances security designs, such as
Ethernet
I/O Server
Serial Device
Server
SFP Module
Din Rail
Power Supply
SNMP V3, SSH, 802.1X, etc.
www.korenix.com
132
3 Flexible Fast Ethernet Combo Ports
The JetNet 4510 is designed with three combo Fast
The switch will automatically detect the priority of
Ethernet ports. Each combo port combines one Small
cable connections for each combo port. Users are
Form factor Pluggable (SFP) socket for 100Mbps
able to connect two 100Mbps SFP ports of JetNet
multimode or single mode SFP transceiver, as well
4510 as a Fast Ethernet Fiber Redundant Ring
as one RJ-45 copper port in 10Mbps full duplex,
topology and the third combo port as a fiber uplink
100Mbps half /full duplex link mode.
port or an applicable port.
Comprehensive Redundant Solutions —
Multiple Super Ring (MSRTM)
The JetNet 4510 supports MSR
TM
(Multiple Super
The MSR
TM
also facilitates the JetNet 4510 to
Ring) the next new generation of RSR (Rapid Super
connect with core management switch via standard
Ring) Ring technology. This new technologies is
Rapid Spanning Tree Protocol or through multiple
perfect for different network redundancy applications
paths or nodes to increase the reliability by Rapid
and structures. With the MSR
TM
TM
technology, a node
Dual Homing (RDH ) Technology. By integrating
TM
and Link Aggregation Control Protocol (LACP)
can be configured to multiple rings with the failover
MSR
time in as little as 5ms and ZERO-second restore
the JetNet 4510 can enhance the link availability
time. In addition, users can extend the ring topology
and to increase the link capacity. Two or more Fast
by adding hundreds of JetNet 4510 to meet the
Ethernet connection are bundled in order to increase
network needs without compromising the speed of
the bandwidth and to create resilient and redundant
the network.
links.
TM
Rapid Dual Homing (RDH ) Technology
TM
Rapid Dual Homing (RDH ) replaces DualHoming II
and Standbys by their link speed. The uplink with the
and can be used for ring coupling. While keeping easy
highest speed is more likely to be the active path for
configuration and multiple redundancies, the failover
data transmission. Link aggregation is also integrated
time is much faster (less than 50 ms) and the restore
into RDH . An uplink can be a link or several
time is ZERO (seamless restoration). Uplinks can
links aggregated as a trunk, which provides better
be auto detected and gathered into groups. In each
redundancy and link capacity.
TM
group, uplinks are sorted into Primary, Secondary,
133
www.korenix.com
Industrial Ethernet Switch
1-to1
connection
n-to1
connection
1-to-n
connection
Rapid
Dual
Homing
n-to-n
connection
Ethernet
trunk
connection
Ethernet
Industrial
PoE Switch
JetNet 4510
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Ring
Coupling
Ethernet
Switch
Ethernet
Entry-Level
Switch
Networking
Computer
JetNet 4510
Communication
Computer
Ethernet
I/O Server
Link Aggregation Control Protocol
Serial Device
Server
Link Aggregation Control Protocol (LACP) allows
Media
you to group multiple Ethernet ports in parallel to
Converter
increase the link bandwidth. The aggregated ports
can be considered one physical port, so that the
LACP
Multiport
Serial Card
bandwidth is higher than just one single Ethernet
port. The member ports of the same trunk group can
SFP Module
balance the loading and backup with each other.
Din Rail
The LACP feature is usually used when you need
Power Supply
higher bandwidth for the backbone network. This is
an inexpensive way for users to transfer much more
technology. Now, there is no recovery time when
data. If the trunk port is also assigned as a ring port,
failures occur. The JetNet 4510 provides a simple
TM
it will become a TrunkRing , which means that the
and easy way to aggregate port bandwidth into Rapid
bandwidth of ring path has increased with port trunk
Super Ring.
www.korenix.com
134
Various Network Control and Security Features
The JetNet 4510 provides various network control
Control Protocol (LACP), Rate Control. The security
and security features. The Network Control feature
can help users avoid hackers’ attack. The features
allows users to optimize their industrial environment.
include DHCP Server, IP and MAC Binding, 802.1x
The supported features include VLAN, IGMP
Access Control, SSH, IP Access Table and Port
Snooping, Quality of Service(QoS), Link Aggregation
Security.
Port Security
Port Security is an enhanced security feature
to the port security table. After enabling this, only the
provided by JetNet 4510. Port Security is also
PC with the available MAC address can access the
known as, “Port and MAC Binding”. The users
network through the switch. The other PCs can’t even
can bind a specific MAC address to a specific
pass the traffic through the port.
port, add the MAC and Port binding entry/entries
Network
Port 1
Port Security Table
Port
VID
Mac Address
Port 1
1
MAC B
PC A
MAC A
PC B
MAC B
PC C
MAC C
PC D
MAC D
Easy-to-Configure Network Management Features
The JetNet 4510 also provides users many advanced
management features. It can be configured smartly
Network
by JetView, Web browser, SNMP, Telnet and RS-232
console Command Line Interface (CLI).
RS-232
It provides Failure notification by E-mail, SNMP
Trap, System Log, Digital Input and Fault Relay. The
JetNet 4510 also supports Built-In Watchdog Timer
for system recovering when detecting CPU failure.
135
www.korenix.com
JetView, Web,
SNMP, Telnet
Industrial Ethernet Switch
JetView, Easy Management Utility
The JetView is the convenient tool
to
help
administrators to discover the JetNet series Switches.
It supports group IP assignment,group firmware
upgrade, group configuration backup and restore.
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
A Built-in Watchdog Timer
Managed
Switch
With a built-in Watchdog timer, the JetNet 4510
performs a warm boot (restarting the switch)
Gigabit Switch
Watchdog Timer
00:00:06
automatically when the switch system locks up. It
Redundant
Switch
saves the effort of maintenance for keeping network
alive if the switch can recover by itself.
CPU Failure = 6 sec
Entry-Level
=> Internal Reset
Switch
00:00:00
Networking
Computer
Communication
Computer
Ethernet
Brilliant Idea for Hazardous Environment Application
Robust Mechanism Design
I/O Server
Serial Device
Server
Korenix JetNet 4510 has an outstanding outlook
class of protection, light weight, rigid shell and
Media
plus is rock solid with strong functionality. Using an
excellent thermal conductivity units can operate
Converter
aluminum extrusion case with industrial quality, IP 31
under harsh industrial environment reliably.
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
136
JetNet 4510 Appearance
LEDs
SFP 8-10,
RJ45 8-10
LEDs
Power, DI, DO, R.M.
Reset
Console
SFP Socket
Din Rail Mounting
Din 35
(35mm)
Fast Ethernet Port 1-7
10/100 Base-TX
Power Input, Digital Input,
Digital Output
Dimensions (Unit –mm)
137
www.korenix.com
Industrial Ethernet Switch
Specification
Standard:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad LACP
Redundancy Technology. Failure recovery within 5ms.
Rapid Dual Homing (RDHTM): Support multiple node to
node, multiple path to one node to obtain more flexible and
reliable architecture
TM
TrunkRing : Provides port aggregate function in ring
path to get more bandwidth for higher throughput ring
architecture
Multiple Ring: New generation of ring coupling technology
without extra control port - TangentRing
Legacy Super Ring: Backward compatible in client mode
IEEE802.1X Port_based Network Access Control
Interface
Performance
Number of Ports: 10/100TX: 7 x RJ-45, Auto MDI/MDI-X,
Auto Negotiation
10/100TX: 3 x RJ-45, combo with SFP
100Base-FX: 3 x SFP with Hot Swappable
Cables:
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
Diagnostic LED:
10/100 RJ-45: Link/Activity(Green), Full duplex/Collision
(Yellow)
SFP: Link/Activity(Green)
Unit: Power(Green), Digital Out(Red), Digital Input(Green),
R.M.(Green)
RS232 Console: RJ-45 Connector, Pin3: TxD, Pin6: RxD,
Pin5:GND
Power: 2 sets of power Inputs
Digital Input: 2 sets of Digital Input
Logic Low (0): 0-10VDC/Logic High(1): 11-30VDC
Alarm: 2 sets of Relay outputs for pre-defined events
Reset: Reset button is provided to restore default settings
Technology
Switch Technology:
Store and Forward Technology with 32Gbps Switch Fabric
System Throughput: 2.976Mpps/ 64bytes packet
Transfer packet size: 64 bytes to 1522 bytes
(with VLAN Tag)
MAC Address: 8K MAC
Packet Buffer: 1Mbits
Relay Alarm:Dry Relay output with 1A@24V ability
Management
Configuration: Cisco-Like CLI, JetView, Web, HTTPS,
SSH; TFTP/Web Update for firmware and configuration
backup/restore, DHCP Client, Warm reboot, Reset to
default, Admin password, Port Speed/Duplex control, status,
statistic, MAC address table display, Static MAC, Aging
time, SNMP v1, v2c, v3, Traps and RMON1
SNMP MIB: MIB-II, Bridge MIB, VLAN MIB, SNMP MIB,
RMON and Private MIB
Port Trunk: Up to 5 Static Trunk and 802.3ad LACP
VLAN: IEEE802.1Q VLAN, GVRP. Up to 64 VLAN groups
Quality of Service: Four priority queues per port,
IEEE802.1p COS and Layer 3 TOS/DiffServ
IGMP Snooping: IGMP Snooping V1/V2/V3 for multicast
filtering and IGMP Query V1/V2
Rate Control: Ingress filtering for Broadcast, Multicast,
Unknown DA or All packets, and Egress filtering for All
packets
NTP: Network Time Protocol to synchronize time from
internet or local PC
Embedded Watchdog: Embedded hardware watchdog
timer to auto reset system when switch system failure
Port Mirroring: Online traffic monitoring on multiple
selected ports
Port Security: Assign authorized MAC to specific port
IP Security: IP security to prevent unauthorized access
802.1x: Port_based Network Access Control
DHCP Server: Up to 255 IP address, support IP and MAC
binding
E-mail Warning: Automatic warning by pre-defined events
System Log: Supports both Local mode and Server mode
Network Redundancy
Network Redundancy: Rapid Spanning Tree Protocol:
IEEE802.1D-2004 Rapid Spanning Tree Protocol.
Compatible with Legacy STP and IEEE802.1w
Multiple Super Ring(MSRTM): 2nd generation Korenix Ring
Power Requirements
System Power: 12~48V/-12~-48VDC with Reverse Polarity
Protection
Power Consumption: 11.5 Watts @ DC 48V
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Mechanical
Media
Installation: DIN-Rail mount or Wall Mount
Case: IP-31 protection, aluminum metal case
Dimension: 137mm(H) x 96mm (W) x 119mm (D)
( without DIN rail clip)
Converter
Weight: 0.915kg with package
Multiport
Serial Card
SFP Module
Environmental
O
Operating Temperature:-20 ~70 C
Operating Humidity: 5% ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 C (-40 ~ 185 F)
Hi-Pot: 1.2KV for ports and power
O
Din Rail
Power Supply
O
Regulatory Approvals
EMI: FCC Class A, CE/EN55022. Class A
EMS: EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: UL/cUL 60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 249,683 Hours, MIL-HDBK-217F GB GB(MILITARY
HANDBOOK)standard
Warranty: 5 years
www.korenix.com
138
Ordering Information
JetNet 4510 Industrial 10-Port Managed Fast Ethernet Switch
Includes:
JetNet 4510(without SFP transceiver)
Wall mounting plate
Quick Installation Guide
Documentation CD-ROM
Console cable
Optional Accessories
100Base-FX Multi-Mode SFP Transceiver
100Base-FX Single-Mode SFP Transceiver
100Base-FX BIDI/WDM Single-Mode SFP Transceiver
139
www.korenix.com
Industrial Ethernet Switch
JetNet 4508
Industrial 8-port Managed Fast Ethernet Switch
8-port 10/100 TX managed fast Ethernet switch
3.2Gbps Switch Fabric with excellent data exchange
performance
Super Ring technology, back up system recovery time less than
20ms and up to 250 sets, Dual Homing and Couple Ring
Industrial
PoE Switch
SNMP v1/v2c, IGMP snooping v1/v2, RMON, VLAN, QoS, Rate
control for network management
IP67/68
Ethernet Switch
Support 1.2KV Hi-Pot isolation protection
Redundant power input DC 12~48V
Rackmount
Managed
Fault relay alarm
Switch
Aluminum case with IP-31 grade protection
o
-20~70 C operating temperature for hazardous environment
application
Gigabit Switch
Redundant
RoHS
Switch
Entry-Level
Switch
Overview
Networking
Computer
JetNet 4508 is an 8 port 10/100TX Industrial
switches through the Dual Homing function to deliver
Managed Fast Ethernet Switch with SNMP, Web
a more reliable networking architecture for system
management interface and innovative software
redundancy.
features for various networking applications. The
JetNet 4508 has a built in relay output for alarms
SNMP functionality is compatible with OPC server
on port and power outage events. The relay output
(Kepware) providing the most popular management
function will form a short circuit to trigger external one
functions in automation. Using standard SNMP tools
to inform your I.T. engineer when a power or port link
it also has remote management ability.
down event has occurred. The port link down alarm is
One of the main challenges in industrial automation
enabled by DIP-switch.
applications is to ensure permanent uptime in the
For operation in harsh environments, the JetNet 4508
Multiport
system. For this requirement, JetNet 4508 provides
is equipped with dual power input with redundancy
Serial Card
the Super Ring mechanism which has 20ms recovery
and rigid aluminum case with excellent heat radiation
time - faster than RSTP. The JetNet 4508 can
allowing a -20~70 C operating temperature.
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
SFP Module
o
Din Rail
merge RSTP and Super Ring functionality with core
Power Supply
Full Network Management & Enhanced Super
Ring Compatibility
Versatile and User-friendly configuration interface,
Recovery time<20 ms gives you fault-tolerant
including SNMP, VLAN, QoS, IGMP, event warning,
connection. JetNet 4508 series also supports Dual
not only to make your job easier, but also saves your
Homing and Ring Coupling, featuring the strong ring
time and money.
redundancy.
www.korenix.com
140
High-Speed Transmission & True Reliability
Excellent data transmission performance is
regulatory approvals, and 5-year global warranty,
provided for you. No traffic will be delayed with the
JetNet 4508 series are your reliable choice for
transmission rate up to 3.2Gbps.
hazardous applications.
With the 1.2KV Hi-Pot isolation protection, CE/FCC
Redundant Power Inputs & Easy Installation
Operating voltage is 12V~48V, the unit can also be
continuity.
cabled with a twin DC24V input. Dual power input and
JetNet 4508 series can be easily wall mounted or
built-in reverse power polarity protection are designed
mounted directly on DIN rail.
as the redundant power system to ensure your power
Brilliant Idea for Hazardous Environment Application
The IP31 rigid aluminum flat casing and wide
Extended operating temperature range is available
operation temperature range ensure reliable
for project-based request.
operation in harsh environment.
Dimensions (Unit –mm)
53.00
25.00
14.00
102.00
26.50
24.50
68.00
86.00
135.00
135.00
1.80
30.00
105.00
5.5*13=71.5
5.5*2=11
12.00
29.50
141
www.korenix.com
9.50
9.00
Industrial Ethernet Switch
Specification
Technology
Interface
Standard: IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3x flow control
IEEE802.1D Spanning Tree
IEEE802.1w Rapid Spanning Tree (RSTP)
IEEE 802.1Q VLAN
IEEE802.1p Class of Service
Number of Ports: 8 x 10/100Base-TX with Auto MDI/
MDI-X, Auto-Negotiation functions.
Connectors: 10/100TX: 8 x RJ-45
Terminal Block: 6-pin for 2 x power input and 1 relay alarm
output
DC power Jack x 1
Cables: CAT-3, CAT-4, CAT-5 unshielded twisted pair or
shielded twisted pair cable. The Link distance is 100 meters
in maximum
Diagnostic LED:
Per system: Power (green) x 3, Ring Master (green) x 1,
Alarm (red) x 1
Per RJ-45 port: Link (green on)/Activity(green blinking),
Full duplex (Yellow on)/Collision (Yellow blinking)
DIP Switch: 1 x 9-pin DIP Switch
DIP switch #1 ~#8:Port Link Down Alarm Enable (On)/
Disable(Off)
DIP switch #9:Ring Master Enable(On)/Disable(Off)
Relay Alarm:Dry Relay output with 1A@24V ability
Performance
Switch Technology:
Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput: 14,880pps for Ethernet and 148,800
for Fast Ethernet
Transfer packet size: 64 to 1522Bytes.
MAC Address: 2K MAC
Packet Buffer: 1Mbits
Management
Configuration: SNMP v1, v2c and Web browser. TFTP
update, configuration backup/restore, DHCP client, warm
reboot, reset to default, Admin password, Port Speed/
Duplex control, status and statistics, SNMP trap, RMON
SNMP MIB: MIB-II, Bridge MIB, RMON, VLAN MIB,
Ethernet like MIB, Korenix Private MIB.
SNMP Trap: Support 3 trap stations.
VLAN: Port Based VLAN, Tag VLAN. VLAN ID 1 to 4094.
64 VLAN groups in maximum, Management VLAN
Quality of Service: Meets IEEE802.1p class of service,
per port 4 priority queues, Layer 3 IPv4 TOS/DiffServ
Rate Control: Support ingress and egress packet filtering
by different types of packet format combination.
Packet filter: 4 types of packet filter rule, All packets,
Broadcast/ multicast/ unknown unicast packet, broadcast/
multicast packet or broadcast packet only
IGMP Snooping: Compliance with IGMP v1/v2 and IGMP
Query mode. Maximum IGMP groups up to 256
Timer: Support Simple Network Time Protocol (SNTP) to
synchronize time from internet.
Firmware upgrade: TFTP firmware upgrade.
Port Mirror: TX/RX only, both of TX and RX packets
System Log: Provides 1000 entries for system or remote
log server
E-mail Warning: SMTP warning by pre-defined events
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Power Requirements
System Power: 2 power input by terminal block
Input Voltage: DC 24V (12~48V) with Reverse Polarity
Protection
Power Consumption: 5.04 Watts @ DC 24V
Mechanical
Entry-Level
Switch
Networking
Computer
Installation: DIN-Rail mount or Wall Mount
Case: IP-31 grade aluminum metal case
Dimension:
135mm(H) x 53mm (W) x 105mm (D) ( without DIN rail clip)
Weight:
1.106g with package
0.731g without package
Environmental
O
Operating Temperature:-20 ~70 C
Operating Humidity: 5% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.2KV for all ports and power
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
O
Network Redundancy
Super Ring:Recovery time less than 20ms and compatible
with JetNet 3500, JetNet 4000 and JetNet 5010G
Coupling Ring: Provides the ability to couple 2 super rings.
Dual Homing: Provides the ability to link Super ring and
RSTP with higher level switch
Rpaid Spanning Tree: IEEE802.1D Spanning Tree and
IEEE802.1w Rapid Spanning Tree
Converter
Regulatory Approvals
Multiport
EMI: FCC Class A, CE/EN55022.
EMS:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: CE/EN60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 319,175 Hours, MIL-HDBK-217F GB standard
Warranty: 5 years
Serial Card
SFP Module
Din Rail
Power Supply
Ordering Information
JetNet 4508 Industrial 8-port Managed Fast Ethernet Switch
Includes:
JetNet 4508
Wall mount panel/Quick Installation Guide/CD User manual
www.korenix.com
142
JetNet 4508f
Industrial 8-port Managed Fast Ethernet Fiber Switch
6-port 10/100 TX and 2 100Base-FX fiber ports, single-mode
Fiber up to 30KM
3.2Gbps Switch Fabric with excellent data exchange
performance
Super Ring technology, back up system recovery time less than
20ms and up to 250 sets, Dual Homing and Couple Ring
SNMP v1/v2c, IGMP snooping v1/v2, RMON, VLAN, QoS, Rate
control for network management
Support 1.2KV Hi-Pot isolation protection
Redundant power input DC 12~48V
Fault relay alarm
Aluminum case with IP-31 grade protection
o
-10~70 C operating temperature for hazardous environment
RoHS
application
Overview
JetNet 4508f is a 6 port 10/100TX plus 2 port
functionality with core switches through the Dual
100Base-FX fiber Industrial Managed Fast Ethernet
Homing function to deliver a more reliable networking
Switch with SNMP, Web management interface and
architecture for system redundancy.
innovative software features for various networking
JetNet 4508f has a built in relay output for alarms
applications. The SNMP functionality is compatible
on port and power outage events. The relay output
with OPC server (Kepware) providing the most
function will form a short circuit to trigger external one
popular management functions in automation. Using
to inform your I.T. engineer when a power or port link
standard SNMP tools it also has remote management
down event has occurred. The port link down alarm is
ability.
enabled by DIP-switch.
One of the main challenges in industrial automation
For operation in harsh environments, the JetNet
applications is to ensure permanent uptime in the
4508f is equipped with dual power input with
system. For this requirement, JetNet 4508f provides
redundancy and rigid aluminum case with excellent
the Super Ring mechanism which has 20ms recovery
heat radiation allowing a -10~70 C operating
time - faster than RSTP.
temperature.
o
The JetNet 4508f can merge RSTP and Super Ring
Full Network Management & Enhanced Super Ring
Compatibility
143
Versatile and User-friendly configuration interface,
R.M. is the primary path. The 2nd Ring Port of the
including SNMP, VLAN, QoS, IGMP, event warning,
R.M. is the block path. Once the primary path fails,
not only to makes your job easier, but also saves
the 2nd path will be recovered within 20ms which
your time and money.
gives you a fault-tolerant connection. JetNet 4508
Super Ring is Korenix Ring redundancy technology.
series also support Dual Homing and Ring Coupling,
The recovery time is <20 ms, the 1st Ring Port of the
featuring the strong ring redundancy.
www.korenix.com
Industrial Ethernet Switch
Fiber Optic Port Options & High-Speed Transmission
Single-mode and Multi-mode fiber optic ports meet
Excellent data transmission performance is
your needs for long distance transmission up to
provided for you. No works will be delayed with the
30KM.
transmission rate up to 3.2Gbps.
Redundant Power Inputs & Easy Installation
Industrial
Operating voltage is 12V~48V, the unit can also be
continuity.
cabled with a twin DC24V input. Dual power input and
JetNet 4508f series can be easily wall mounted or
built-in reverse power polarity protection are designed
mounted directly on DIN rail.
PoE Switch
IP67/68
Ethernet Switch
as the redundant power system to ensure your power
Rackmount
Managed
Hazardous Environment Application & True Reliability
Switch
Gigabit Switch
The IP-31 rigid aluminum flat casing and wide
With the 1.2KV Hi-Pot isolation protection, CE/FCC
Redundant
operation temperature range ensure reliable
regulatory approvals, and 5-year global warranty,
Switch
operation for harsh environment. Extended operating
JetNet 4508f series are your reliable choice for
temperature range is available for project-based
hazardous applications.
Entry-Level
Switch
request.
Networking
Computer
Communication
Dimensions (Unit –mm)
Computer
53.00
Ethernet
25.00
14.00
I/O Server
102.00
26.50
Serial Device
Server
24.50
68.00
Media
Converter
86.00
135.00
135.00
Multiport
Serial Card
SFP Module
Din Rail
1.80
9.50
9.00
Power Supply
30.00
105.00
5.5*13=71.5
5.5*2=11
12.00
29.50
www.korenix.com
144
Specification
Technology
Interface
Standard: IEEE802.3 10Base-T
IEEE802.3u 100Base-TX/100Base-FX
IEEE802.3x flow control and Back-pressure
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree (RSTP)
IEEE 802.1Q VLAN
IEEE802.1p Class of Service
Number of Ports: 6 x 10/100Base-TX with Auto MDI/
MDI-X, Auto-Negotiation functions. 2 x 100Base-FX
Connectors:
10/100TX: 6 x RJ-45
100Base-FX: 2 x SC connectors for Multi-mode or single
mode fiber
Terminal Block: 6-pin for 2 x power input and 1 relay alarm
output
DC power Jack x 1
Cables: CAT-3, CAT-4, CAT-5 unshielded twisted pair or
shielded twisted pair cable. The Link distance is 100 meters
in maximum
Fiber Cable:
50/125um or 62.5/125 multi-mode fiber, 2KM
(JetNet 4508f-m)
8/125um or 9/125um single mode fiber, 30KM
(JetNet 4508f-s)
Fiber Transceiver:
JetNet 4508f-m
Wave-length:1310nm
Tx Power:-19~-14dBm(Min.)
Rx Sensitivity:-31~-14dBm(Max.)
Link Budget:12dBm
JetNet 4508f-s
Wave-length:1310nm
Tx Power:-15~-8dBm(Min.)
Rx Sensitivity:-34~-8dBm(Max.)
Performance
Switch Technology:
Store and Forward Technology with 3.2Gbps Switch Fabric.
System Throughput: 1.49Mpps
MAC Address: 2K MAC with Auto learning and refresh
function
Packet Buffer: 1Mbits
Transfer performance: 14,880pps for Ethernet and
148,800pps for Fast Ethernet and transfer packet size
from 64 to 1522Bytes
Management
Configuration: SNMP v1, v2c and Web browser. TFTP
update, configuration backup/restore, DHCP client, warm
reboot, reset to default, Admin password, Port Speed/
Duplex control, status and statistics, SNMP trap, RMON
SNMP MIB: MIB-II, Bridge MIB, RMON, VLAN MIB,
Ethernet like MIB, Korenix Private MIB.
SNMP Trap: Support 3 trap stations.
VLAN: Port Based VLAN, Tag VLAN. VLAN ID 1 to 4094.
64 VLAN groups in maximum, Management VLAN
Quality of Service: Meets IEEE802.1p class of service,
per port 4 priority queues, Layer 3 IPv4 TOS/DiffServ
Rate Control: Support ingress and egress packet filtering
by different types of packet format combination.
Packet filter: 4 types of packet filter rule, All packets,
Broadcast/ multicast/ unknown unicast packet, broadcast/
multicast packet or broadcast packet only
IGMP Snooping: Compliance with IGMP v1/v2 and IGMP
Query mode. Maximum IGMP groups up to 256
Timer: Support Simple Network Time Protocol (SNTP) to
synchronize time from internet.
Firmware upgrade: TFTP firmware upgrade.
Port Mirror: TX/RX only, both of TX and RX packets
System Log: Provides 1000 entries for system or remote
log server
E-mail Warning: SMTP warning by pre-defined events
Network Redundancy
Super Ring: The Super Ring function supports netwrok
recovery time less than 20ms with 250 entities, and also
compatible with JetNet 3500, JetNet 4000 and JetNet
5010G
Coupling Ring: Provides the ability to couple 2 super rings
Dual Homing: Provides the ability to link Super ring and
RSTP with higher level switch
Spanning Tree: IEEE802.1D Spanning Tree
IEEE802.1w Rapid Spanning Tree
145
Link Budget:19dBm
Diagnostic LED:
Per system: Power (green) x 3, Ring Master (green) x 1,
Alarm (red) x 1
Per RJ-45 port: Link (green on)/Activity(green blinking), Full
duplex (Yellow on)/Collision (Yellow blinking)
DIP Switch: 1 x 9-pin DIP Switch
DIP switch #1 ~#8:Port Link Down Alarm Enable (On)/
Disable(Off)
DIP switch #9:Ring Master Enable(On)/Disable(Off)
Relay Alarm: Dry Relay output with 1A@24V ability. The
relay can be enable/disable by software configuration
Power Requirements
System Power: 2 power input by terminal block
Input Voltage: DC 24V (12~48V) with Reverse Polarity
Protection
Power Consumption: JetNet 4508f: 7.68 Watts @ DC 24V
Mechanical
Installation: DIN-Rail mount or Wall Mount
Case: IP-31 grade aluminum metal case
Dimension: 135mm(H) x 53mm (W) x 105mm (D) ( without
DIN rail clip)
Weight: 1.11kg with package
0.735kg without package
www.korenix.com
Industrial Ethernet Switch
Environmental
O
Operating Temperature:-10 ~70 C
Operating Humidity: 5% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.2KV for all ports and power
O
Regulatory Approvals
EMI: FCC Class A, CE/EN55022.
EMS:EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: CE/EN60950, UL/cUL60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 315,109 Hours, MIL-HDBK-217F GB
Warranty: 5 years
Industrial
PoE Switch
Ordering Information
IP67/68
Ethernet Switch
JetNet 4508f-m Industrial 8-port Managed Fast Ethernet Fiber Switch, 2 SC/Multi-mode, 2KM
Rackmount
Managed
Includes:
Switch
JetNet 4508f-m
Gigabit Switch
Wall mount panel
Quick Installation Guide
Redundant
CD User manual
Switch
JetNet 4508f-s Industrial 8-port Managed Fast Ethernet Fiber Switch, 2 SC/Single-mode, 30KM
Includes:
Entry-Level
Switch
JetNet 4508f-s
Networking
Wall mount panel
Computer
Quick Installation Guide
Communication
CD User manual
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
146
JetNet 4010
Industrial 10-port Web-Managed Fast Ethernet Switch
7 10/100 Base TX and 3 RJ-45/SFP combo (10/100BaseTX, 100Base-FX )
Multiple Super Ring (recovery time <5ms), Rapid Dual Homing,
Multiple Ring, and RSTP
VLAN, GVRP, QoS, IGMP Snooping V1/V2/V3, Rate Control,
Port Trunking, LACP, Online Multi-Port Mirroring
32Gbps Non-Blocking, 8K MAC address table
Supports console CLI , Web, HTTPS, SSH and JetView
Advanced security feature supports IP Security, Port Security,
DHCP Server, IP and MAC Binding, 802.1x network access
control
RoHS
Event Notification by E-mail, Syslog, Digital Input and Relay
Output
Rigid Aluminum Case Complies with IP31, Redundant power,
DIN-Rail/Wall-Mounting/Desktop Installation
Overview
JetNet 4010 is an industrial Managed Fast Ethernet
In addition to cost savings, the flexible design of the
Switch, designed with 7-10/100TX and 3-10/100
JetNet 4010 can adapt to the world's fastest Ring
RJ-45 / 100FX SFP combo ports.
Technology by Korenix. It only takes 5ms to recover
The flexible 3 combo ports offer flexibility for
from link failure, no matter how many nodes are
additional fiber connections by plugging different
inside a ring, and the restore time is zero when the
types of 100MM SFP modules, which can support
failed link is recovered. The patented Multiple Super
2KM in Multi-Mode or 120KM in Single-Mode. The
Ring provides the most flexible ring topologies,
combo ports make port combination even easier,
such as shared link of multiple rings, or shared unit
such as 8 RJ ports and 2 fiber ports, or 9 RJ ports
of multiple rings, making it the best possible. The
and 1 fiber port. The standard 10 port Fast Ethernet
Multiple Super Ring is highly compatible to Rapid
switch greatly reduces total cost by up to 15% for
Spanning Tree by the new Dual Homing plus design.
fiber uplink network.
JetNet 4010 also enhances security designs, such as
SSH, 802.1X, etc.
147
www.korenix.com
Industrial Ethernet Switch
3 Flexible Fast Ethernet Combo Ports
The JetNet 4010 is designed with three combo Fast
The switch will automatically detect the priority of
Ethernet ports. Each combo port combines one Small
cable connections for each combo port. Users are
Form factor Pluggable (SFP) socket for 100Mbps
able to connect two 100Mbps SFP ports of JetNet
multimode or single mode SFP transceiver, as well
4010 as a Fast Ethernet Fiber Redundant Ring
as one RJ-45 copper port in 10Mbps full duplex,
topology and the third combo port as a fiber uplink
100Mbps half /full duplex link mode.
port or an applicable port.
Industrial
PoE Switch
Comprehensive Redundant Solutions —
Multiple Super Ring (MSRTM)
IP67/68
Ethernet Switch
Rackmount
The JetNet 4010 supports MSR
TM
(Multiple Super
The MSR
TM
also facilitates the JetNet 4010 to
Ring) the next new generation of RSR (Rapid Super
connect with core management switch via standard
Ring) Ring technology. This new technologies is
Rapid Spanning Tree Protocol or through multiple
perfect for different network redundancy applications
paths or nodes to increase the reliability by Rapid
and structures. With the MSR
TM
TM
technology, a node
Dual Homing (RDH ) Technology. By integrating
TM
and Link Aggregation Control Protocol (LACP)
can be configured to multiple rings with the failover
MSR
time in as little as 5ms and ZERO-second restore
the JetNet 4010 can enhance the link availability
time. In addition, users can extend the ring topology
and to increase the link capacity. Two or more Fast
by adding hundreds of JetNet 4010 to meet the
Ethernet connection are bundled in order to increase
network needs without compromising the speed of
the bandwidth and to create resilient and redundant
the network.
links.
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
TM
Rapid Dual Homing (RDH ) Technology
I/O Server
Serial Device
TM
Rapid Dual Homing (RDH ) replaces DualHoming II
and Standbys by their link speed. The uplink with the
and can be used for ring coupling. While keeping easy
highest speed is more likely to be the active path for
configuration and multiple redundancies, the failover
data transmission. Link aggregation is also integrated
Server
Media
Converter
TM
time is much faster (less than 50 ms) and the restore
into RDH . An uplink can be a link or several
Multiport
time is ZERO (seamless restoration). Uplinks can
links aggregated as a trunk, which provides better
Serial Card
be auto detected and gathered into groups. In each
redundancy and link capacity.
SFP Module
group, uplinks are sorted into Primary, Secondary,
Din Rail
Power Supply
www.korenix.com
148
1-to1
connection
n-to1
connection
1-to-n
connection
Rapid
Dual
Homing
n-to-n
connection
Ethernet
trunk
connection
Ethernet
JetNet 4010
Ring
Coupling
Ethernet
Ethernet
JetNet 4010
Link Aggregation Control Protocol
Link Aggregation Control Protocol (LACP) allows
you to group multiple Ethernet ports in parallel to
increase the link bandwidth. The aggregated ports
can be considered one physical port, so that the
LACP
bandwidth is higher than just one single Ethernet
port. The member ports of the same trunk group can
balance the loading and backup with each other.
The LACP feature is usually used when you need
higher bandwidth for the backbone network. This is
an inexpensive way for users to transfer much more
technology. Now, there is no recovery time when
data. If the trunk port is also assigned as a ring port,
failures occur. The JetNet 4010 provides a simple
TM
149
it will become a TrunkRing , which means that the
and easy way to aggregate port bandwidth into Rapid
bandwidth of ring path has increased with port trunk
Super Ring.
www.korenix.com
Industrial Ethernet Switch
Various Network Control and Security Features
The JetNet 4010 provides various network control
Control Protocol (LACP), Rate Control. The security
and security features. The Network Control feature
can help users avoid hackers’ attack. The features
allows users to optimize their industrial environment.
include DHCP Server, IP and MAC Binding, 802.1x
The supported features include VLAN, IGMP
Access Control, SSH, IP Access Table and Port
Snooping, Quality of Service(QoS), Link Aggregation
Security.
Industrial
PoE Switch
Port Security
IP67/68
Ethernet Switch
Port Security is an enhanced security feature
to the port security table. After enabling this, only the
provided by JetNet 4010. Port Security is also
PC with the available MAC address can access the
Rackmount
known as, “Port and MAC Binding”. The users
network through the switch. The other PCs can’t even
Managed
can bind a specific MAC address to a specific
pass the traffic through the port.
Switch
port, add the MAC and Port binding entry/entries
Gigabit Switch
Redundant
Network
Switch
Port 1
Entry-Level
Switch
Networking
Computer
Port Security Table
Communication
Computer
Port
VID
Mac Address
Port 1
1
MAC B
Ethernet
I/O Server
PC A
MAC A
PC B
MAC B
PC C
MAC C
PC D
MAC D
Serial Device
Server
Media
Easy-to-Configure Network Management Features
Converter
Multiport
Serial Card
The JetNet 4010 also provides users many advanced
management features. It can be configured smartly
SFP Module
Network
by JetView, Web browser, Telnet and RS-232 console
Din Rail
Command Line Interface (CLI).
Power Supply
RS-232
It provides Failure notification by E-mail, System
Log, Digital Input and Fault Relay. The JetNet 4010
also supports Built-in Watchdog Timer for system
JetView, Web,
SNMP, Telnet
recovering when detecting CPU failure.
www.korenix.com
150
JetView, Easy Management Utility
The JetView is the convenient tool
to
help
administrators to discover the JetNet series Switches.
It supports group IP assignment,group firmware
upgrade, group configuration backup and restore.
A Built-in Watchdog Timer
With a built-in Watchdog timer, the JetNet 4010
Watchdog Timer
performs a warm boot (restarting the switch)
00:00:06
automatically when the switch system locks up. It
saves the effort of maintenance for keeping network
CPU Failure = 6 sec
alive if the switch can recover by itself.
=> Internal Reset
00:00:00
Brilliant Idea for Hazardous Environment Application
Robust Mechanism Design
151
Korenix JetNet 4010 has an outstanding outlook plus
quality, IP 31 class of protection, light weight, rigid
is rock solid and fashionable with strong functionality.
shell and excellent thermal conductivity units can
Using an aluminum extrusion case with industrial
operate under harsh industrial environment reliably.
www.korenix.com
Industrial Ethernet Switch
JetNet 4010 Appearance
LEDs
SFP 8-10,
RJ45 8-10
LEDs
Power, DI, DO, R.M.
Reset
Console
SFP Socket
Industrial
Din Rail Mounting
Din 35
(35mm)
PoE Switch
IP67/68
Ethernet Switch
Fast Ethernet Port 1-7
10/100 Base-TX
Rackmount
Managed
Switch
Power Input, Digital Input,
Digital Output
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Dimensions (Unit –mm)
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
JetNet 4010
Din Rail
Power Supply
www.korenix.com
152
Specification
TM
Technology
Standard:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad LACP
IEEE802.1X Port_based Network Access Control
Performance
Switch Technology:
Store and Forward Technology with 32Gbps Switch Fabric
System Throughput: 2.976Mpps/ 64bytes packet
Transfer packet size: 64 bytes to 1522 bytes
(with VLAN Tag)
MAC Address: 8K MAC
Packet Buffer: 1Mbits
Relay Alarm:Dry Relay output with 1A@24V ability
Management
Configuration: Cisco-Like CLI, JetView, Web, HTTPS,
SSH; TFTP/Web Update for firmware and configuration
backup/restore, DHCP Client, Warm reboot, Reset to
default, Admin password, Port Speed/Duplex control, status,
statistic, MAC address table display, Static MAC, Aging time
Port Trunk: Up to 5 Static Trunk and 802.3ad LACP
VLAN: IEEE802.1Q VLAN, GVRP. Up to 64 VLAN groups
Quality of Service: Four priority queues per port,
IEEE802.1p COS and Layer 3 TOS/DiffServ
IGMP Snooping: IGMP Snooping V1/V2/V3 for multicast
filtering and IGMP Query V1/V2
Rate Control: Ingress filtering for Broadcast, Multicast,
Unknown DA or All packets, and Egress filtering for All
packets
NTP: Network Time Protocol to synchronize time from
internet or local PC
Embedded Watchdog: Embedded hardware watchdog
timer to auto reset system when switch system failure
Port Mirroring: Online traffic monitoring on multiple
selected ports
Port Security: Assign authorized MAC to specific port
IP Security: IP security to prevent unauthorized access
802.1x: Port_based Network Access Control
DHCP Server: Up to 255 IP address, support IP and MAC
binding
E-mail Warning: Automatic warning by pre-defined events
System Log: Supports both Local mode and Server mode
Network Redundancy
Network Redundancy: Rapid Spanning Tree Protocol:
IEEE802.1D-2004 Rapid Spanning Tree Protocol.
Compatible with Legacy STP and IEEE802.1w
Multiple Super Ring(MSRTM): 2nd generation Korenix Ring
Redundancy Technology. Failure recovery within 5ms
153
Rapid Dual Homing (RDH ): Support multiple node to
node, multiple path to one node to obtain more flexible and
reliable architecture
TrunkRingTM: Provides port aggregate function in ring
path to get more bandwidth for higher throughput ring
architecture
Multiple Ring: New generation of ring coupling technology
without extra control port - TangentRing
Legacy Super Ring: Backward compatible in client mode
Interface
Number of Ports: 10/100TX: 7 x RJ-45, Auto MDI/MDI-X,
Auto Negotiation
10/100TX: 3 x RJ-45, combo with SFP
100Base-FX: 3 x SFP with Hot Swappable
Cables:
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)
Diagnostic LED:
10/100 RJ-45: Link/Activity(Green), Full duplex/Collision
(Yellow)
SFP: Link/Activity(Green)
Unit: Power(Green), Digital Out(Red), Digital Input(Green),
R.M.(Green)
RS232 Console: RJ-45 Connector, Pin3: TxD, Pin6: RxD,
Pin5:GND
Power: 2 sets of power Inputs
Digital Input: 2 sets of Digital Input
Logic Low (0): 0-10VDC/Logic High(1): 11-30VDC
Alarm: 2 sets of Relay outputs for pre-defined events
Reset: Reset button is provided to restore default settings
Power Requirements
System Power: 12~48V/-12~-48VDC with Reverse Polarity
Protection
Power Consumption: 11.5 Watts @ DC 48V
Mechanical
Installation: DIN-Rail mount or Wall Mount
Case: IP-31 protection, aluminum metal case
Dimension: 137mm(H) x 96mm (W) x 119mm (D)
( without DIN rail clip)
Weight: 0.915kg with package
Environmental
O
Operating Temperature:-20 ~70 C
Operating Humidity: 5% ~ 95% (non-condensing)
Storage Temperature: -40 ~ 85 C (-40 ~ 185 F)
Hi-Pot: 1.2KV for ports and power
O
O
Regulatory Approvals
EMI: FCC Class A, CE/EN55022. Class A
EMS: EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: UL/cUL 60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 249,683 Hours, MIL-HDBK-217F GB GB(MILITARY
HANDBOOK)standard
Warranty: 5 years
www.korenix.com
Industrial Ethernet Switch
Ordering Information
JetNet 4010 Industrial 10-Port Web-Managed Fast Ethernet Switch
Includes:
JetNet 4010(without SFP transceiver)
Wall mounting plate
Quick Installation Guide
Documentation CD-ROM
Console cable
Industrial
PoE Switch
IP67/68
Ethernet Switch
Optional Accessories
Rackmount
Managed
100Base-FX Multi-Mode SFP Transceiver
Switch
100Base-FX Single-Mode SFP Transceiver
Gigabit Switch
100Base-FX BIDI/WDM Single-Mode SFP Transceiver
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
154
JetNet 4005 / 4008
Industrial 5 / 8-port Web-Managed Fast Ethernet Switch
5/8-port 10/100 TX Web-Managed Fast Ethernet Switch
3.2Gbps Switch Fabric with excellent data exchange
performance
Super Ring technology, back up system recovery time less
than 20ms
IGMP snooping v1/v2, VLAN, QoS, Rate control for network
management
Web-based configuration
Support 1.2KV Hi-Pot isolation protection
Redundant power input DC 12~48V
Fault relay alarm
Aluminum case with IP-31 grade protection
DIN-Rail/Wall-Mounting/Desktop Installation
RoHS
o
-20~70 C operating temperature for hazardous environment
application
Overview
The JetNet 4005/4008 are 5/8-port 10/100TX
recovery time - faster than RSTP. JetNet 4005/4008
Industrial Web-Managed Fast Ethernet Rail Switch
has a built-in relay output for port and power
with excellent software features including port control,
outage alarms. The fault relay alarm will inform you
port status, VLAN, Port Mirror, IGMP snooping with
whenever there is any port link down. Just move
query, Quality of Service, Simple Network Time
up the DIP switch and the fault relay alarm will be
Protocol (SNTP), DHCP Client, STP/RSTP and
functioning!
Super Ring.
To be operated in a harsh operating environment,
One of the main challenges in industrial automation
JetNet 4005/4008 are equipped with dual power
applications is to ensure permanent uptime in the
inputs with redundancy and rigid aluminum case with
system. To meet this requirement, JetNet 4005/4008
excellent heat radiation for -20~70 C environment
provides Super Ring mechanism which has 20ms
operating temperature.
o
Web Management for Easy Configuration & Non-stop
Super Ring
155
Through the versatile and User-friendly interface
The recovery time is <20 ms, the 1st Ring Port of
configuration of VLAN, QoS, IGMP and event
the R.M. is the primary path. The 2nd Ring Port of
warning are not only to made easy, but also save
the R.M. is the block path. Once the primary path is
your time and money.
failed, the 2nd path will be recovered within 20ms
Super Ring is Korenix Ring redundancy technology.
which gives you fault-tolerant connection.
www.korenix.com
Industrial Ethernet Switch
High-Speed Transmission & Fault Relay Output
Excellent data transmission performance is
know when there is any event of port link down. Just
provided for you. No traffic will be delayed with the
move up the DIP switch, the fault relay alarm will be
transmission rate up to 3.2Gbps.
functioning!
One relay output is an important feature to let you
Redundant Power Inputs & Easy Installation
Industrial
PoE Switch
Operating voltage is 12V~48V, the unit can also be
your power continuity.
cabled with a twin DC24V input. Dual power input
JetNet JetNet 4005/4008 series can be easily wall
and built-in reverse power polarity protection are
mounted or mounted directly on DIN rail.
IP67/68
Ethernet Switch
Rackmount
designed as the redundant power system to ensure
Managed
Switch
Hazardous Environment Application & True Reliability
The IP31 rigid aluminum flat casing and wide
With the 1.2KV Hi-Pot isolation protection, CE/FCC
operating temperature ensures reliable operation in
regulatory approvals, and 5-year global warranty,
harsh environments. Extended operating temperature
JetNet 4005/4008 series are your reliable choice for
range is available for project-based request.
hazardous applications.
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Dimensions (Unit –mm)
Communication
Computer
53.00
25.00
Ethernet
14.00
102.00
I/O Server
26.50
Serial Device
Server
24.50
68.00
Media
86.00
135.00
135.00
Converter
Multiport
Serial Card
SFP Module
1.80
Din Rail
9.50
9.00
Power Supply
30.00
105.00
5.5*13=71.5
5.5*2=11
12.00
29.50
www.korenix.com
156
Specification
Technology
Standard: IEEE802.3 10Base-T
IEEE802.3u 100Base-TX, IEEE802.3x flow control
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree (RSTP)
IEEE 802.1Q VLAN
IEEE802.1p Class of Service
Performance
Switch Technology:
Store and Forward Technology with 3.2Gbps Switch Fabric.
System Throughput: 14,880pps for Ethernet and
148,800pps for Fast Ethernet and transfer packet size
from 64 to 1522Bytes
MAC Address: 2K MAC
Packet Buffer: 1Mbits
Management
Configuration: Web browser. TFTP update, configuration
backup/restore, DHCP client, warm reboot, reset to
default, Admin password, Port Speed/Duplex control,
status and statistics
VLAN: Port Based VLAN, Tag VLAN. VLAN ID 1 to 4094.
64 VLAN groups in maximum, Management VLAN
Quality of Service: Meets IEEE802.1p class of service,
per port 4 priority queues, Layer 3 IPv4 TOS/DiffServ
Rate Control: Support ingress and egress packet filtering
by different types of packet format combination.
Packet filter: 4 types of packet filter rule, All packets,
Broadcast/ multicast/ unknown unicast packet, broadcast/
multicast packet or broadcast packet only
IGMP Snooping: Compliance with IGMP v1/v2 and IGMP
Query mode. Maximum IGMP groups up to 256
Timer: Support Simple Network Time Protocol (SNTP) to
synchronize time from internet.
Firmware upgrade: TFTP firmware upgrade.
Port Mirror: TX/RX only, both of TX and RX packets
Network Redundancy
Super Ring: Recovery time less than 20ms and compatible
with JetNet 3500, JetNet 4500 and JetNet 5010G series.
Spanning Tree: IEEE802.1D Spanning Tree and
IEEE802.1w Rapid Spanning Tree
Interface
Number of Ports: 5/8 x 10/100Base-TX with Auto MDI/
MDI-X, Auto-Negotiation functions
Connectors: RJ-45
Terminal Block: 6-pin for 2 x power input and 1 relay output
DC power Jack x 1
Cables: CAT-3, CAT-4, CAT-5 unshielded twisted pair or
shielded twisted pair cable. The Link distance is 100 meters
in maximum.
Diagnostic LED: Per system: Power (green) x 3, Ring
Master (green) x 1, Alarm (red) x 1
Per RJ-45 port: Link (green on)/Activity(green blinking), Full
duplex (Yellow on)/Collision (Yellow blinking)
DIP Switch: JetNet 4005/4008: 1 x 6/9-pin DIP Switch
DIP switch #1 ~#5/8:Port Link Down Alarm Enable (On)/
Disable(Off)
DIP switch #6/9:Ring Master Enable(On)/Disable(Off)
Relay Alarm:Dry Relay output with 1A@24V ability.
Power Requirements
System Power: 2 power input by terminal block
Input Voltage: DC 24V (12~48V) with Reverse Polarity
Protection
Power Consumption:
JetNet 4005: 3.1 Watts @ DC 24V
JetNet 4008: 5.04 Watts @ DC 24V
Mechanical
Installation: DIN-Rail mount or Wall Mount
Case: IP-31 grade aluminum metal case
Dimension:
135mm(H) x 53mm (W) x 105mm (D) ( without DIN rail clip)
Weight: 1.1kg with package, 0.725kg without package
Environmental
O
Operating Temperature:-20 ~70 C
Operating Humidity: 5% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.2KV for all ports and power
O
Regulatory Approvals
EMI: FCC Class A, CE/EN55022.
EMS:EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: CE/EN60950, UL/cUL60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF:
JetNet 4005: 305,482 Hours
JetNet 4008: 319,175 Hours
MIL-HDBK-217F GB standard
Warranty: 5 years
Ordering Information
JetNet 4005 Industrial 5-port Web-Managed Fast Ethernet Switch
JetNet 4008 Industrial 8-port Web-Managed Fast Ethernet Switch
Includes:
JetNet 4005 / 4008
Wall mount panel/Quick Installation Guide
157
www.korenix.com
Industrial Ethernet Switch
JetNet 4008f
Industrial 8-port Web-Managed Fast Ethernet Fiber Switch
6-port 10/100 TX and 2 multi-mode or single-mode fiber ports
Web-Managed Fast Ethernet Switch
3.2Gbps Switch Fabric with excellent data exchange
performance
Super Ring technology, back up system recovery time less than
Industrial
PoE Switch
20ms and up to 250 sets
IP67/68
IGMP snooping v1/v2, VLAN, QoS, CPU Rate control for
Ethernet Switch
network management
Web-based configuration
Rackmount
Managed
Aluminum case with IP-31 grade protection
Switch
DIN-Rail/Wall-Mounting/Desktop Installation
o
Gigabit Switch
-10~70 C operating temperature for hazardous environment
application
Redundant
RoHS
Switch
Entry-Level
Switch
Overview
Networking
Computer
The JetNet 4008f is a 5/8-port 10/100TX Industrial
recovery time - faster than RSTP.
Web-Managed Fast Ethernet Rail Switch with
JetNet 4008f has a built-in relay output for port and
excellent software features including port control, port
power outage alarms. The fault relay alarm will
status, VLAN, Port Mirror, IGMP snooping with query,
inform you whenever there is any port link down. Just
Quality of Service, Simple Network Time Protocol
move up the DIP switch and the fault relay alarm will
(SNTP), DHCP Client, STP/RSTP and Super Ring.
be functioning! To be operated in a harsh operating
One of the main challenges in industrial automation
environment, JetNet 4008f is equipped with dual
applications is to ensure permanent uptime in the
power inputs with redundancy and rigid aluminum
system. To meet this requirement, JetNet 4008f
case with excellent heat radiation for -10~70 C
provides Super Ring mechanism which has 20ms
environment operating temperature.
Communication
o
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
Web Management for Easy Configuration & Non-stop
Super Ring
SFP Module
Din Rail
Power Supply
Through the versatile and User-friendly interface
The recovery time is <20 ms, the 1st Ring Port of
configuration of VLAN, QoS, IGMP and event
the R.M. is the primary path. The 2nd Ring Port of
warning are not only to made easy, but also save
the R.M. is the block path. Once the primary path is
your time and money.
failed, the 2nd path will be recovered within 20ms
Super Ring is Korenix Ring redundancy technology.
which gives you fault-tolerant connection.
www.korenix.com
158
Fiber Optic Port Options & High-Speed Transmission
Single-mode and Multi-mode fiber optic ports meet
Excellent data transmission performance is
your needs for long distance transmission up to
provided for you. No traffic will be delayed with the
30KM.
transmission rate up to 3.2Gbps.
Fault Relay Output & Redundant Power Inputs
One relay output is an important feature to let you
JetNet 4008f is equipped with dual power inputs with
know when there is any event of port failure. Just
redundancy and rigid aluminum case with excellent
move up the DIP switch, the fault relay alarm will be
heat radiation for -10~70 C environment operating
activated! To be operated in a harsh environment, the
temperature.
o
True Reliability & Easy Installation
With the 1.2KV Hi-Pot isolation protection, CE/FCC
applications. JetNet 4008f can be easily wall mounted
regulatory approvals and 5-year global warranty, the
and mounted directly on DIN rail.
JetNet 4008f is your reliable choice for hazardous
Brilliant Idea for Hazardous Environment Application
The IP31 rigid aluminum flat casing and wide
Extended operating temperature range is available
operation temperature range ensure reliable
for project-based request.
operation for harsh environment.
Dimensions (Unit –mm)
53.00
25.00
14.00
102.00
26.50
24.50
68.00
86.00
135.00
135.00
1.80
30.00
105.00
5.5*13=71.5
5.5*2=11
12.00
29.50
159
www.korenix.com
9.50
9.00
Industrial Ethernet Switch
Specification
Fiber Transceiver:
JetNet 4008f-m
Wave-length:1310nm
Tx Power:-19~-14dBm(Min.)
Rx Sensitivity:-31~-14dBm(Max.)
Link Budget:12dBm
JetNet 4008f-s
Wave-length:1310nm
Tx Power:-15~-8dBm(Min.)
Rx Sensitivity:-34~-8dBm(Max.)
Technology
Standard:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX/100Base-FX
IEEE802.3x flow control
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree (RSTP)
IEEE 802.1Q VLAN
IEEE802.1p Class of Service
Performance
Switch Technology:
Store and Forward Technology with 3.2Gbps Switch Fabric.
System Throughput: 14,880pps for Ethernet and
148,800pps for Fast Ethernet and transfer packet size
from 64 to 1522Bytes
MAC Address: 2K MAC
Packet Buffer: 1Mbits
Management
Configuration: Web browser. TFTP update, configuration
backup/restore, DHCP client, warm reboot, reset to
default, Admin password, Port Speed/Duplex control,
status and statistics,
VLAN: Port Based VLAN, Tag VLAN. VLAN ID 1 to 4094.
64 VLAN groups in maximum, Management VLAN
Quality of Service: Meets IEEE802.1p class of service,
per port 4 priority queues, Layer 3 IPv4 TOS/DiffServ
Rate Control: Support ingress and egress packet filtering
by different types of packet format combination.
Packet filter: 4 types of packet filter rule, All packets,
Broadcast/ multicast/ unknown unicast packet, broadcast/
multicast packet or broadcast packet only
IGMP Snooping: Compliance with IGMP v1/v2 and IGMP
Query mode. Maximum IGMP groups up to 256
Timer: Support Simple Network Time Protocol (SNTP) to
synchronize time from internet.
Firmware upgrade: TFTP firmware upgrade.
Port Mirror: TX/RX only, both of TX and RX packets
Network Redundancy
Super Ring: Recovery time less than 20ms and compatible
with JetNet 3500, JetNet 4500 and JetNet 5010G series.
Spanning Tree: IEEE802.1D Spanning Tree and
IEEE802.1w Rapid Spanning Tree
Interface
Number of Ports:
6 x 10/100Base-TX with Auto MDI/MDI-X, Auto-Negotiation
2 x 100Base-FX/SC connector for multi-mode /single-mode
Connectors:
10/100TX: RJ-45
100Base-FX: SC/Multi-mode, SC/Single-mode
Terminal Block: 6-pin for 2 x power input and 1 relay output
DC power Jack x 1
Cables:
CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded
twisted pair cable. The Link distance is 100 meters in
maximum
Multi-mode Fiber (JetNet 4008f-m):
50/125um, 62.5/125um, available link distance to 2KM
Single-mode Fiber (JetNet 4008f-s):
9/125um, 10/125um, available link distance to 30KM
Industrial
PoE Switch
Link Budget:19dBm
Diagnostic LED:
Per system: Power (green) x 3, Ring Master (green) x 1,
Alarm (red) x 1
Per port: Link (green on)/Activity(green blinking), Full duplex
(Yellow on)/Collision (Yellow blinking)
DIP Switch: 1 x 9-pin DIP Switch
DIP switch #1:Port Link Down Alarm Enable (On)/
Disable(Off)
DIP switch #9:Ring Master Enable(On)/Disable(Off)
Relay Alarm: Dry Relay output with 1A@24V ability
Power Requirements
System Power: 2 power input by terminal block
Input Voltage: DC 24V (12~48V) with Reverse Polarity
Protection
Power Consumption: 7.68 Watts @ DC 24V
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Mechanical
Installation: DIN-Rail mount or Wall Mount
Case: IP-31 grade aluminum metal case
Dimension:
135mm(H) x 53mm (W) x 105mm (D) ( without DIN rail clip)
Weight:
1.05kg with package, 0.675kg without package
Environmental
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
O
Operating Temperature:-10 ~70 C
Operating Humidity: 5% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.2KV for all ports and power
O
Regulatory Approvals
EMI: FCC Class A, CE/EN55022.
EMS:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: CE/EN60950, UL/cUL60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 297,077 Hours
MIL-HDBK-217F GB standard
Warranty: 5 years
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
Ordering Information
JetNet 4008f Industrial 8-port Web-Managed Fast
Ethernet Fiber Switch
Includes:
JetNet 4008f (JetNet 4008f-m,2km/JetNet 4008f-s,30km)
Wall mount panel, Quick Installation Guide, CD User manual
www.korenix.com
160
JetNet 3008
Industrial 8-port Fast Ethernet Switch
8 10/100TX Ports with Auto MDI/MDI-X
Compact size with full power redundancy
2.0Gbps Switch Fabric
QoS for packet forwarding precedence
Broadcast storm packet filtering.
Port and power event alarm
IP-31 aluminum alloy case
DIN rail and wall mount
Dual power input DC12~48V
AC 1.5KV Hi-pot isolation protection
RoHS
Overview
The JetNet 3008 is a new generation 8-port compact
without traffic congestions.
Fast Ethernet switch equipped with 2.0Gbps Packet
To survive under hazard environments, it's equipped
Switch engine as particular packet forwarding and
with 2 redundant power inputs, as the wide range
filtering mechanism to fulfill industrial communications
input avoiding any power interruption and also
on the filed sites. It provides the packet forwarding
operating between -25~70 C temperature range. For
ability to handle 64~1552 Bytes packet size into 2
the purposes of easy maintenance, JetNet 3008 has
priority queues which comply with quality of service
one alarm-relay for port link events and power events
for the best data forwarding performance.
via alarm to assist engineers with notifications on
In addition, for the best network performance, both
the filed sites. With the JetNet 3008, users enjoy the
broadcast storm filtering and flow control functions
superiority and the reliable performance on the filed
can ensure your data traffic deliver to destination
site applications.
o
Redundant Power Inputs & True Reliability
161
The JetNet 3008 has dual DC24V inputs, and can
continuity. With the 1.5KV Hi-Pot isolation protection,
also operate on 12V~48V. Dual power inputs and
CE/FCC regulatory approvals, and 5-year global
built-in reverse power polarity protection are designed
warranty, the JetNet 3008 is the reliable choice for
as the redundant power system to ensure power
hazardous applications.
www.korenix.com
Industrial Ethernet Switch
Plug-and-Play Switch & High-Speed Transmission
JetNet 3008 requires no user setup and immediately
provided for you. No traffic will be delayed with the
starts operating as soon as you power them
transmission rate up to 2.0Gbps.
up. Excellent data transmission performance is
Dimensions (Unit –mm)
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
162
Specification
Technology
Standard:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3x flow control
Switch Technology:
Store and forward technology and with 2.0Gbps Switch
Fabric
System Performance
Aggregate System Throughput: 1.49Mpps
MAC Address: 2K MAC
Packet Buffer: 448Kbits
Transfer Packet Size:
148,80pps for Ethernet 10Base-T
148810pps for Fast Ethernet
Packet size from 64~1552 Bytes ( Long Packet forwarding
ability)
Broadcast storm control: Default enabled.
traffic threshold: 200 packets/ Sec. @100Mbps; 20
packets/Sec. @ 10Mbps
Class of Service: Provides 2 packet forwarding Queues:
High Queue (4~7), Low Queue (0~3)
Quality of Service: Default Enabled. Supports VLAN tag
priority and IPv4 packet precedence
Event alarm relay: Provides port and power event alarm;
Enabled by 9-PIN Dipswitch
Interface
Number of Ports:
8 x 10/100 Base-TX with Auto MDI/MDI-X, Auto-Negotiation
function
Connectors:
10/100 Base-TX: RJ-45
Power: Terminal Block
Alarm relay: Terminal block connector with 1A @DC24V
carry ability
Cables:
CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded
twisted pair cable. The Link distance is 100 meters in
maximum
Diagnostic LED:
Per system: Power (Green) x2
10/100TX port: Link (Green on) / Activity (Green blinks)
100Mbps Link (Yellow on)/ 10Mbps Link (Yellow off)
Alarm: Port /Power Event (Red on)
Power Requirements
System Power: 2 Power inputs with redundancy and
polarity reverse protection
Voltage: DC 24V (12~48V)
Power Consumption: 8 Watts @ DC 24V
Mechanical
Installation: DIN-Rail mount
Case: IP-31 grade aluminum metal case
Dimension:
120mm(H) x 55mm (W) x 108mm (D) ( without DIN rail clip)
Weight:
0.775kg with package
0.525kg without package
Environmental
O
Operating Temperature: -25 ~70 C
Operating Humidity: 0% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Storage Humidity: 0% ~ 95%, (non-condensing)
O
Regulatory Approvals
EMI: FCC class A, CE/EN55022 class A
EMS:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 400,000hours *MIL-HDBK-217F GB(MILITARY
HANDBOOK) standard
Warranty: 5 years
Ordering Information
JetNet 3008!Industrial 8-port Fast Ethernet Switch
Includes:
JetNet 3008
Quick Installation Guide
CD User manual
163
www.korenix.com
Industrial Ethernet Switch
JetNet 3008f
Industrial 8-port Fast Ethernet Fiber Switch
6 10/100TX Ports with Auto MDI/MDI-X
2 100FX, Multi-mode/Single-mode
Compact size with full power redundancy
2.0Gbps Switch Fabric
QoS for packet forwarding precedence
Industrial
PoE Switch
Broadcast storm packet filtering
IP67/68
Port and power event alarm
Ethernet Switch
IP-31 aluminum alloy case
DIN rail and wall mount
Rackmount
Managed
Dual power input DC12~48V
Switch
AC 1.5KV Hi-pot isolation protection
Gigabit Switch
Redundant
RoHS
Switch
Entry-Level
Switch
Overview
Networking
Computer
The JetNet 3008f is a new generation of the 8-port
implements 2 100Mbps fiber ports with multi-mode
Communication
compact Fast Ethernet switch equipped with
2KM or single-mode 30KM transceiver in order to
Computer
2.0Gbps Packet Switch engine as particular packet
achieve stable and long-distant transmissions.
forwarding and filtering mechanism to fulfill industrial
To survive under hazard environments, it is equipped
communications on the filed sites. It provides the
with 2 redundant power inputs, as the wide range
graceful packet forwarding ability to handle 64~1552
input avoiding any power interruption and also
packet size into 2 priority queues which comply
operating between -10~70 C temperature range. For
with quality of service for the best data forwarding
the purpose of easy maintenance, JetNet 3008f has
performance.
one alarm-relay for port link events and power events
In addition, for the best network performance both of
via alarm to assist engineers with notifications on the
broadcast storm filtering and flow control functions
filed sites. With the JetNet 3008f, users enjoy the
can ensure your data traffic deliver to destination
superiority and the reliable performance on the filed
without traffic congestion. To avoid interferences as
site applications.
Ethernet
I/O Server
Serial Device
Server
o
well as to extend the network coverage, JetNet 3008f
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
Redundant Power Inputs & True Reliability
The JetNet 3008f has dual DC24V inputs, and can
continuity. With the 1.5KV Hi-Pot isolation protection,
also operate on 12V~48V. Dual power inputs and
CE/FCC regulatory approvals, and 5-year global
built-in reverse power polarity protection are designed
warranty, the JetNet is the reliable choice for
as the redundant power system to ensure power
hazardous applications.
www.korenix.com
164
Plug-and-Play Switch & High-Speed Transmission
JetNet 3008f require no user setup and immediately
provided for you. No traffic will be delayed with the
start operating as soon as you power them up.
transmission rate up to 2.0Gbps.
Excellent data transmission performance is
Dimensions (Unit –mm)
165
www.korenix.com
Industrial Ethernet Switch
Specification
Min Tx Power:-20dBm
Max Tx Power:-14dBm
Min Rx Sensitivity:0dBm
Max Rx Sensitivity:-31dBm
Link budget:11dBm
JetNet 3008f-s
Link Distance: 30KM (Max.)
Wave-length:1310nm
Min Tx Power:-15dBm
Max Tx Power:-8dBm
Min Rx Sensitivity:0dBm
Max Rx Sensitivity:-34dBm
Link budget:19dBm
Diagnostic LED:
Per system: Power (Green) x2
10/100TX port: 10/100TX port: Link (Green on) / Activity
(Green blinking)
100Mbps Link (Yellow on)/ 10Mbps Link (Yellow off)
100Mbps Fiber: Link (Green on)/Activity (Green blinking)
Alarm: Port /Power Event (Red on)
Technology
Standard:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX, 100Base-FX
IEEE802.3x Flow Control
IEEE802.1p Class of Service
IEEE802.1Q Quality of Service
Switch Technology:
Store and forward technology with 2.0Gbps Switch Fabric
System Performance
Aggregate System Throughput: 1.49Mpps
MAC Address: 2K MAC
Packet Buffer: 448Kbits
Transfer Packet Size:
148,80pps for Ethernet 10Base-T
148810pps for Fast Ethernet
Packet size from 64~1552 Bytes ( Long Packet forwarding
ability)
Broadcast storm control: Default enabled.
Broadcast Traffic threshold: 200 packets/ Sec.@100Mbps;
20 packets/Sec. @ 10Mbps
Class of Service: Provides 2 packet forwarding Queues:
High Queue (4~7), Low Queue (0~3)
Quality of Service: Default Enabled. Supports VLAN tag
priority and IPv4 packet precedence
Event alarm relay: Provides port and power event alarm;
Enabled by 9-PIN Dipswitch
System Power: 2 Power inputs with redundancy and
polarity reverse protection
Voltage: DC 24V (12~48V)
Power Consumption: 12 Watts @ DC 24V
Mechanical
Number of Ports:
6 x 10/100 Base-TX with Auto MDI/MDI-X,
Auto-Negotiation function
2 100Mbps Fiber in multi-mode (JetNet 3008f-m) or
single-mode (JetNet 3008f-s)
Connectors: 10/100 Base-TX: RJ-45
100Mbps Fiber: SC
Power: Terminal Block
Alarm relay: Terminal block connector with 1A @DC24V
carry ability
Cables:
CAT-3, CAT-4, CAT-5 or CAT-5e unshielded twisted pair or
shielded twisted pair cable. The Link distance is 100 meters
in maximum.
JetNet 3008f-m: multi-mode optical fiber, 50~62.5/125um, 2KM
JetNet 3008f-s: single-mode optical fiber, 8~10/125um, 30KM
Fiber Transceiver:
JetNet 3008f-m
Link Distance: 2KM (Max.)
Wave-length: 1310nm
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Power Requirements
Interface
Industrial
Entry-Level
Switch
Networking
Computer
Installation: DIN-Rail mount
Case: IP-31 grade aluminum metal case
Dimension:
120mm(H) x 55mm (W) x 108mm (D) ( without DIN rail clip)
Weight:
0.97kg with package
0.54kg without package
Environmental
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
O
Operating Temperature: -10 ~70 C
Operating Humidity: 0% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Storage Humidity: 0% ~ 95%, (non-condensing)
O
Media
Converter
Regulatory Approvals
Multiport
EMI: FCC class A, CE/EN55022 class A
EMS: EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 400,000hours *MIL-HDBK-217F GB(MILITARY
HANDBOOK) standard
Warranty: 5 years
Serial Card
SFP Module
Din Rail
Power Supply
Ordering Information
JetNet 3008f-m!Industrial 8-port Fast Ethernet Fiber Switch, 2 SC/Multi-mode, 2KM
JetNet 3008f-s!Industrial 8-port Fast Ethernet Fiber Switch, 2 SC/Single-mode, 30KM
Includes:
JetNet 3008f-m / JetNet 3008f-s
Quick Installation Guide
CD User manual
www.korenix.com
166
JetNet 3005
Industrial 5-port Fast Ethernet Switch
5 10 / 100 TX redundant Fast Ethernet Switch
3.2Gbps Switch Fabric with excellent data exchange
performance
Support 1.2KV Hi-Pot isolation protection
Redundant power input DC 12~48V
Aluminum case with IP-31 grade protection
o
-20~70 C operating temperature for hazardous environment
application
RoHS
Overview
JetNet 3005 is low cost 5 port fast Ethernet switch,
To provide excellent transmission performance,
featuring an IP31 grade rigid aluminum case with
JetNet 3005 adopts "store and forwarding"
excellent heat radiation ability. To be operated with
technology with a built-in 3.2Gbps switch fabric to
dual power sources, JetNet 3005 is equipped with 2
deliver non-blocking and full wire speed performance
power inputs in redundancy.
on each port.
Plug-and-Play Switch & High-Speed Transmission
JetNet 3005 series requires no user setup and
Excellent data transmission performance is
immediately starts operating as soon as you power
provided for you. No works will be delayed with the
them up.
transmission rate up to 3.2Gbps.
Redundant Power Inputs & True Reliability
Best with two DC24V input, and also compatible with
With the 1.2KV Hi-Pot isolation protection, CE/FCC
range from 12V~48V. Dual power input and built-
regulatory approvals, and 5-year global warranty,
in reverse power polarity protection are designed as
JetNet 3005 are your reliable choice for hazardous
the redundant power system to ensure your power
applications.
continuity.
167
www.korenix.com
Industrial Ethernet Switch
Fault Relay Output & Hazardous Environment Application
One relay output is an important feature to let you
The IP31 rigid aluminum flat casing and wide
know when there is any event of port link down. Just
operation temperature range ensure reliable
move up the DIP switch, the fault relay alarm will be
operation for harsh environment. Extended operating
functioning!
temperature range is available for project-based
request.
JetNet 3005 Appearance
Industrial
PoE Switch
IP67/68
Ethernet Switch
Fast Ethernet Back-bone
Rackmount
Managed
UTP Cable
Field
Control Site
Switch
Gigabit Switch
UTP Cable
Redundant
Switch
Serial Server
JetPort 5201
Proguammable
Logic Controller
Entry-Level
Switch
JetNet 3005
Networking
Computer
Digital
Control System
Digital AC
Power Meter
Communication
Computer
Ethernet
I/O Server
Dimensions (Unit –mm)
Serial Device
Server
53.00
25.00
14.00
Media
102.00
26.50
Converter
Multiport
24.50
68.00
Serial Card
86.00
135.00
135.00
SFP Module
Din Rail
Power Supply
1.80
9.50
9.00
30.00
105.00
5.5*13=71.5
5.5*2=11
12.00
29.50
www.korenix.com
168
Specification
Technology
Power Requirements
Standard:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3x flow control
Switch Technology:
Store and forward technology and with 3.2Gbps switch
bandwidth
Aggregate System Throughput: 1.49Mpps
MAC Address: 1K MAC
Packet Buffer: 512Kbits
Transfer performance: 14,880pps for Ethernet and
148,800pps for Fast Ethernet and handle packet size from
64 to 1522Bytes
System Power: 2 power input by terminal block
Input Voltage: DC 24V (12~48V) with reverse polarity
protection
Interface
Operating Temperature: -20 ~70 C
Operating Humidity: 5% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.2KV for all ports and power
Power Consumption: 2.5 Watts @ DC 24V
Mechanical
Installation: DIN-Rail mount or Wall Mount
Case: IP-31 grade aluminum metal case
Dimension:
135mm(H) x 53mm (W) x 105mm (D) ( without DIN rail clip)
Weight:
1.016kg with package
0.68kg without package
Environmental
O
Number of Ports: 5 x 10/100 Base-TX with Auto MDI/
MDI-X, Auto-Negotiation function
Connectors:
10/100TX: RJ-45
Terminal Block: 6-pin for 2 x power input
DC power Jack x 1
Cables:
CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded
twisted pair cable. The Link distance is 100 meters in
maximum
Diagnostic LED:
Per system: Power (green) x3
Per RJ-45 port: Link (green on)/Activity(green blinking), Full
duplex (Yellow on)/Collision (Yellow blinking)
O
Regulatory Approvals
EMI: FCC Class A, CE/EN55022.
EMS:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: CE/EN60950, UL/cUL
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 448,564 Hours MIL-HDBK-217F GB standard
Warranty: 5 years
Ordering Information
JetNet 3005 Industrial 5-port Fast Ethernet Switch
Includes:
JetNet 3005
Wall mount panel
Quick Installation Guide
CD User manual
169
www.korenix.com
Industrial Ethernet Switch
JetNet 3005f
Industrial 5-port Redundant Fast Ethernet Fiber Switch
4 10/100 TX ports and 1 multi-mode or single-mode fiber Fast
Ethernet Switch
3.2Gbps Switch Fabric with excellent data exchange
performance
Support 1.2KV Hi-Pot isolation protection
Industrial
PoE Switch
Redundant power input DC 12~48V
Aluminum case with IP-31 grade protection
o
IP67/68
Ethernet Switch
-10~70 C operating temperature for hazardous environment
application
Rackmount
Managed
Switch
Gigabit Switch
Redundant
RoHS
Switch
Entry-Level
Switch
Overview
Networking
Computer
JetNet 3005f is low cost 5 port fast Ethernet switch,
To provide excellent transmission performance,
featuring an IP31 grade rigid aluminum case with
J etNet 3005f adopts "s tor e and for war di ng"
excellent heat radiation ability. To be operated with
technology with a built-in 3.2Gbps switch fabric to
Ethernet
dual power sources, JetNet 3005f is equipped with 2
deliver non-blocking and deliver a real non-blocking
I/O Server
power inputs in redundancy.
and full wire speed performance on each port.
Communication
Computer
Serial Device
Server
Plug-and-Play Switch & High-Speed Transmission
JetNet 3005 series require no user setup and
Excellent data transmission performance is
immediately start operating as soon as you power
provided for you. No traffic will be delayed with the
them up.
transmission rate up to 3.2Gbps.
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
Redundant Power Inputs & True Reliability
The JetNet 3005f has dual DC24V inputs, and
With the 1.2KV Hi-Pot isolation protection, CE/FCC
can also operate on 12V~48V. Dual power inputs
regulatory approvals, and 5-year global warranty, ,
and built-in reverse power polarity protection are
the JetNet 3005f is the reliable choice for hazardous
designed as the redundant power system to ensure
applications.
power continuity.
www.korenix.com
170
Fault Relay Output & Hazardous Environment Application
One relay output is an important feature to let you
The IP31 rigid aluminum flat casing and wide
know when there is a port link down event. Just move
operation temperature range ensure reliable
up the DIP switch and the fault relay alarm will be
operation in harsh environments.
functioning!
Extended operating temperature range is available
for project-based request.
JetNet 3005f Appearance
Fast Ethernet Back-bone
Field
Control Site
Fiber Cable
UTP Cable
Serial Server
JetPort 5601f
Proguammable
Logic Controller
JetNet 3005f
Digital
Control System
Digital AC
Power Meter
Dimensions (Unit –mm)
53.00
25.00
14.00
102.00
26.50
24.50
68.00
86.00
135.00
135.00
1.80
30.00
105.00
5.5*13=71.5
5.5*2=11
12.00
29.50
171
www.korenix.com
9.50
9.00
Industrial Ethernet Switch
Specification
JetNet 3005f-s
Wave-length:1310nm
Tx Power:-15~-8dBm(Min.)
Rx Sensitivity:-34~-8dBm(Max.)
Link Budget:19dBm
Diagnostic LED:
Per system: Power (green) x3
Per RJ-45 port: Link (green on)/Activity(green blinking), Full
Technology
Standard:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX/100Base-FX
IEEE802.3x flow control
Switch Technology:
Store and forward technology and with 3.2Gbps switch
bandwidth.
Aggregate System Throughput: 1.49Mpps
MAC Address: 1K MAC
Packet Buffer: 512Kbits
Transfer performance: 14,880pps for Ethernet and
148,800pps for Fast Ethernet and handle packet size from
64 to 1522Bytes
duplex (Yellow on)/Collision (Yellow blinking)
Industrial
Power Requirements
PoE Switch
System Power: 2 power input by terminal block with
redundancy
Input Voltage: DC 24V (12~48V) with reverse polarity
protection.
Power Consumption: 3.7 Watts @ DC 24V
Interface
Number of Ports:
4 x 10/10Base-TX with Auto MDI/MDI-X, Auto-Negotiation
function
1 x 100Base-FX for Multi-mode or Single-mode fiber
Connectors:
10/100 Base-TX: RJ-45
100Base-FX: 1 x SC
Terminal Block: 6-pin for 2 x power input
DC power Jack x 1
Cables:
RJ-45: CAT-3, CAT-4, CAT-5 unshielded twisted pair or
shielded twisted pair cable. The Link distance is 100 meters
in maximum
SC (Multi-mode): 50/125um or 62.5/125um fiber cable,
available distance 2KM.
SC (Single-mode): 8/125um or 9/125um fiber cable,
available distance 30KM
Fiber Transceiver:
JetNet 3005f-m
Wave-length:1310nm
Tx Power:-19~-14dBm(Min.)
Rx Sensitivity:-31~-14dBm(Max.)
Mechanical
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Installation: DIN-Rail mount or Wall Mount
Case: Aluminum Case with IP31 grade case protection
Dimension:
135mm(H) x 53mm (W) x 105mm (D) ( without DIN rail clip)
Gigabit Switch
Redundant
Switch
Environmental
O
Operating Temperature: -10 ~70 C
Operating Humidity: 5% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.2KV for all ports and power
O
Regulatory Approvals
EMI: FCC Class A, CE/EN55022.
EMS:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
Safety: CE/EN60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 380,973 Hours
MIL-HDBK-217F GB standard
Warranty: 5 years
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Link Budget:12dBm
Multiport
Serial Card
Ordering Information
SFP Module
JetNet 3005f-m Industrial 5-Port Redundant Fast Ethernet Fiber Switch, 1 SC/Multi-mode, 2KM
Includes:
Din Rail
Power Supply
JetNet 3005f-m
Wall mounting plate and six screws
Quick Installation Guide
CD User manual
JetNet 3005f-s Industrial 5-Port Redundant Fast Ethernet Fiber Switch, 1 SC/Single-mode, 30KM
Includes:
JetNet 3005f-s
Wall mounting plate and six screws
Quick Installation Guide
CD User manual
www.korenix.com
172
JetNet 2005
Industrial 5-port Compact Fast Ethernet Switch
5-port 10/100 TX Compact Fast Ethernet switch
3.2Gbps Switch Fabric with excellent data exchange
performance
Support 1.5KV Hi-Pot isolation protection
Dual mode for power input, AC18-27V/DC18-32V
Fault relay alarm
Aluminum case with IP-31 grade protection
o
-20~70 C operating temperature for hazardous
environment application
RoHS
Overview
Korenix JetNet 2005 is an Industrial 5-port
ability against dust and water. JetNet 2005 provides
10/100Base-TX Ethernet switch. JetNet 2005
one relay output for port link down events, which is
adopts slim industrial design to save rail space for
enabled/ disabled by the DIP switch. JetNet 2005 is
compact systems. In order to survive under harsh
powered by 18~27VAC or 18~32VDC from a 4-pin
environment, JetNet 2005 features an industrial-
terminal block.
grade aluminum case with IP31 grade protection
Plug-and-Play Switch & High-Speed Transmission
JetNet 2005 series require no user setup and
Excellent data transmission performance is
immediately start operating as soon as you power it
provided for you. No traffic will be delayed with the
up..
transmission rate up to 3.2Gbps.
Compact Size & Fault Relay Output
The slim-line design makes it an ideal model that
know when there is any event of port link down. Just
would physically fit in a network environment with
move up the DIP switch, the fault relay alarm will be
limited space.
functioning!
One relay output is an important feature to let you
173
www.korenix.com
Industrial Ethernet Switch
Dual Mode for Power Input & True Reliability for the
Best Support
AC 18V~27V or DC 18V~32V is available for different
regulatory approvals, and 5-year global warranty,
operating environments.
JetNet 2005 series are your reliable choice for
With the 1.5KV Hi-Pot isolation protection, CE/FCC
hazardous applications.
Easy Installation & Brilliant Idea for Hazardous
Environment Application
Industrial
PoE Switch
IP67/68
JetNet 2005 series can be easily wall mounted and
operation temperature range ensure reliable
mounted directly on DIN rail.
operation for harsh environment. Extended operating
The IP31 rigid aluminum flat casing and wide
temperature range is available for project-based
Managed
request.
Switch
Ethernet Switch
Rackmount
Gigabit Switch
JetNet 2005 Application
Redundant
Switch
Fast Ethernet Back-bone
Entry-Level
Field
Control Site
Switch
UTP Cable
Networking
Computer
UTP Cable
Communication
Serial Server
JetPort 5201
Proguammable
Logic Controller
Computer
Ethernet
JetNet 2005
I/O Server
Digital AC
Power Meter
Link Down Dry
Relay Output
Digital
Control System
Serial Device
Server
Media
Converter
Dimensions (Unit –mm)
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
www.korenix.com
174
Specification
Technology
Mechanical
Standard:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3x flow control
Switch Technology:
Store and forward technology and with 3.2Gbps switch
fabric
Aggregate System Throughput: 1.49Mpps
Installation: DIN-Rail mount or Wall Mount
Case: Aluminum case with IP-31 protection
Dimension:
111.8mm(H) x 30mm (W) x 98.2mm (D) ( with DIN rail clip)
111.8mm(H) x 30mm (W) x 89mm (D) ( without DIN rail clip)
Weight:
372g with package
Interface
Environmental
Number of Ports:
5 x 10/100 Base-TX with Auto MDI/MDI-X, Auto-Negotiation
function
Connectors:
10/100 Base-TX: RJ-45
Power/Relay: 4-pin terminal block
Cables:
CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded
twisted pair cable. The Link distance is 100 meters in
maximum
Diagnostic LED:
System: Power (green), Fault (red on)
RJ-45 port: 100Mbps Link (green on)/Activity(green blinking)
10Mbps Link (yellow on)/Activity(yellow blinking)
Operating Temperature: -20 ~70 C
Operating Humidity: 0% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.5KV for all ports and power
Power Requirements
System Power:
2 pins terminal block for power input.
DC 12~48V with reverse polarity protection.
AC 18~36V, 47~63Hz
Power Consumption: 3.0 Watts @ DC 24V
290g without package
O
O
Regulatory Approvals
EMI: FCC Class A, CE/EN55022.
EMS:
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Safety: CE/EN60950
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 818,646 Hours, MIL-HDBK-217F GB standard
Warranty: 5 years
Ordering Information
JetNet 2005 Industrial 5-port Compact Fast Ethernet Switch
Includes:
JetNet 2005
Quick Installation Guide
175
www.korenix.com
Industrial Ethernet Switch
JetNet 2005f
Industrial 5-port Compact Fast Ethernet Fiber Switch
4-ports 10/100 TX and 1 multi-mode or single-mode fiber
compact Fast Ethernet Switch
3.2Gbps Switch Fabric with excellent data exchange
performance
Support 1.5KV Hi-Pot isolation protection
Industrial
PoE Switch
Dual mode for power input, AC18-27V/DC18-32V
Fault relay alarm
IP67/68
Ethernet Switch
Aluminum case with IP-31 grade protection
o
-10~70 C operating temperature for hazardous
environment application
Rackmount
Managed
Switch
Gigabit Switch
Redundant
RoHS
Switch
Entry-Level
Switch
Overview
Networking
Computer
Korenix JetNet 2005f is an Industrial with 4 ports
In order to be operated in harsh environment, JetNet
10/100Base-TX and one 100Base-FX Fast Ethernet
2005f is equipped with IP31 grade case design to
switch. With the fiber uplink function, it enlarges the
meet the requirements of drop-water and dust proof.
transmission distance to 2KM by multi-mode fiber
The JetNet 2005f also provides one relay output
Ethernet
(JetNet 2005f-m) or 30KM by single- mode fiber
for port error events, which is enabled/ disabled by
I/O Server
(JetNet 2005f-s).
the dip switch. Moreover, JetNet 2005f has good
Serial Device
The JetNet 2005f adopts slim and rigid aluminum
immunity to against unstable power source and can
Server
case to save rail space and provides good heat
accept AC 18~27V or DC 18~32V power input by
radiation ability for compact system requirement.
4-pin terminal block.
Communication
Computer
Media
Converter
Multiport
Plug-and-Play Switch & High-Speed Transmission
Serial Card
SFP Module
JetNet 2005 series requires no user setup and
Excellent data transmission performance is
immediately starts operating as soon as you power it
provided for you. No traffic will be delayed with the
up.
transmission rate up to 3.2Gbps.
Din Rail
Power Supply
Compact Size & Fault Relay Output
The slim-line design makes it an ideal model that
know when there is any event of port link down. Just
would physically fit in a network environment with
move up the DIP switch, the fault relay alarm will be
limited space.
functioning!
One relay output is an important feature to let you
www.korenix.com
176
Fiber Optic Port Options for Long Distance Requirement
& Dual Mode for Power Input
Single-mode and Multi-mode fiber optic ports meet
AC 18V~27V or DC 18V~32V is available for different
your needs for long distance transmission up to
operating environment.
30KM.
Easy Installation & Brilliant Idea for Hazardous
Environment Application
JetNet 2005f series can be easily wall mounted and
operating temperature range ensure reliable
mounted directly on DIN rail.
operation in harsh environments. Extended operating
The IP31 rigid aluminum flat casing and wide
temperature range is available for project-based
request.
JetNet 2005f Application
Fast Ethernet Back-bone(Fiber)
Field
Control Site
Optical Fiber
UTP Cable
Serial Server
JetPort 5201
Proguammable
Logic Controller
JetNet 2005f
Digital AC
Power Meter
Link Down Dry
Relay Output
Dimensions (Unit –mm)
177
www.korenix.com
Digital
Control System
Industrial Ethernet Switch
Specification
RJ-45 port 1~4, Fiber port 5.
On: Enable port link down alarm.
Off: Disable port link down alarm.
Diagnostic LED:
System: Power (green), Fault (red on)
RJ-45 port: 100Mbps Link (green on)/Activity(green flashing)
Technology
Standard:
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3u 100Base-FX
IEEE802.3x flow control
Switch Technology: Store and forward technology and
with 3.2Gbps switch fabric
Aggregate System Throughput: 1.49Mpps
10Mbps Link (yellow on)/Activity(yellow flashing)
Power Requirements
Interface
Number of Ports: 4 x 10/100 Base-TX with Auto MDI/
MDI-X function, Auto-Negotiation
1 x 100Base-FX supports multi-mode or single mode fiber
Connectors: 10/100 Base-TX: RJ-45
100Base-FX: Duplex SC
Power/Relay: 4-pin terminal block
Cables:
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded
twisted pair or shielded twisted pair cable.
The link distance is maximum 100 meters.
Fiber: SC, multi-mode or single-mode
Multi-mode fiber:
50/125um or 62.5/125um, max. distance 2KM
Single-mode fiber: 8/125um, 9/125um or 10/125 um, max.
distance 30KM
Fiber Transceiver:JetNet 2005f-m, multi-mode fiber
Link Distance: 2KM (Max.)
Wave-length: 1310nm
Min Tx Power:-20dBm
Max Tx Power:-14dBm
Min Rx Sensitivity:0dBm
Max Rx Sensitivity:-31dBm
Link budget:11dBm
JetNet 2005f-s, single-mode fiber
Link Distance: 30KM (Max.)
Wave-length:1310nm
Min Tx Power:-15dBm
Max Tx Power:-8dBm
Min Rx Sensitivity:0dBm
Max Rx Sensitivity:-34dBm
Link budget:19dBm
Port Alarm DIP Switch:
DIP 1~5: Enable or disable port link down alarm for
System Power: 2 pins from 4-pin terminal block for DC or
AC power input. DC 18~32V with reverse polarity protection.
AC 18~27V, 47~63Hz
Power Consumption: 4 Watts @ DC 24V
Mechanical
Installation: DIN-Rail mount or Wall Mount
Case: Aluminum case with IP-31 protection
Dimension:
111.8mm(H) x 30mm (W) x 98.2mm (D) ( with DIN rail clip)
111.8mm(H) x 30mm (W) x 89mm (D) ( without DIN rail clip)
Weight:
377g with package
295g without package
Environmental
O
Operating Temperature: -10 ~70 C
Operating Humidity: 0% ~ 95%, (non-condensing)
Storage Temperature: -40 ~ 85 C
Hi-Pot: 1.5KV for all ports and power
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
O
Networking
Computer
Regulatory Approvals
EMI: FCC Class A, CE/EN55022.
EMS:
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Safety: CE/EN60950, UL/cUL
Shock: IEC60068-2-27
Vibration: IEC60068-2-6
Free Fall: IEC60068-2-32
MTBF: 713,506 Hours, MIL-HDBK-217F GB standard
Warranty: 5 years
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
Ordering Information
JetNet 2005f-m Industrial 5-port Compact Ethernet Fiber Switch, 1 SC/Multi-mode, 2KM
Includes:
JetNet 2005f-m
Quick Installation Guide
JetNet 2005f-s Industrial 5-port Compact Ethernet Fiber Switch, 1 SC/Single-mode, 30KM
Includes:
JetNet 2005f-s
Quick Installation Guide
www.korenix.com
178