1
Download RD10MD2
Transcript
4 Block Diagram SD Digital Out or Analog Composite Out CH 1 HD-SDI Input Downconvert Composite Encoder ReClock HD-SDI Reclocked Output (1) SD Digital Out or Analog Composite Out CH 2 HD-SDI Input Downconvert Composite Encoder ReClock HD-SDI Reclocked Output (1) RD10MD2, Block Diagram I/O Connections CH2 SDI/Comp Out 1 CH1 SDI/Comp Out 2 CH1 Loop Out No Connect J8 J6 J4 J2 J9 J7 J5 J3 J1 CH2 HD/SD In CH2 Loop Out CH2 SDI/Comp Out 2 CH1 HD/SD In CH1 SDI/ Comp Out 1 FR1 Frame Layout RD10MD2 Rear Panel CH1 Loop Out J1 J3 CH1 SDI/Comp Out 1 J5 CH2 SDI/Comp Out 2 J7 CH2 Loop Out J9 CH2 HD/SD In J2 CH1 SDI/Comp Out 2 J4 CH2 SDI/Comp Out 1 CH1 HD/SD In J6 No Connect J8 FR2 Frame Layout RD10MD2 Rear Panel FR1 and FR2 BNC Connector Assignments, RD10MD2 Card Module When the RD10MD2 module is installed in an AJA FR1 or FR2 frame, a corresponding group of 9 BNCs on the rear panel then provide I/O for the module. The illustration above shows the connector assignments for both the FR1 and FR2 when used with the RD10MD2. Output configuration is discussed next in User Controls.
