Download USER MANUAL

CS-211S User manual V1.0
TESTING,PLEASE WAIT...
10
This self-test stage may needs about 10 seconds for machine to get
warmed up. If the test result is OK, then machine will enter into
normal working status shown as following interface:
MIX- COUNT
STOP
VALUE:
0.00
COUNT:
0
B
F:
0
MIX-COUNT means mix-counting mode
RUN/STOP is the sign showing machine’s running or stop status.
B is the sign of Batch Function is ON.
VALUE is for total Amount. COUNT is for total Quantity, F shows the
quantity of foreign/fake coins.
·Press START/STOP key，the machine will enter into Total Amount &
Quantity Display Mode interface:
MIX- COUNT
RUN
VALUE:
0.00
COUNT:
0
B
F:
0
At the same time, Motor will begin to run to get the machine work.
When coin sorting is finished, it will display the sorting result of
genuine and foreign coins on the above interface. The foreign coins
will be rejected into the right-most Rejected Coin Drawer.
After the machine stops running, press LIST key to check
Separate Channel Amount & Quantity Display Mode, shown as follows:
Page 6 of 15