Download US CA - Wittus

PELLET STOVES
Chapter 3
INSTALLATION AND USE MANUAL
page
29
Figure 4 - Remov ing the packaging screws
(in figure Toba stove)
The stove body or unit must always be kept in a vertical position when
moved, and moved only using carts. Special care must be used to
protect the door and the glass from impacts that would damage them.
Moving the product must always be done with care. If possible, unpack
the stove in the area where it is going to be installed.
The materials which make up the packaging are not
so no special procedures for disposal by required.
toxic or harmful,
Their storage, disposal or possible re cycling are therefore the responsibility
of the final user, in compliance with current legislation on the subject.
Do not store the stove unit or its cladding without their packaging.
Position the stove without its cladding and connect it to the flue pipe.
Once the operations for connection
are complete, assemble the
cladding (ceramics or steel sides).
Installation and assembly
Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited