Download DPP-FP50

Symptom
Check
Cause/Solutions
The image
cannot be
printed fully in
the print range.
• Did you set “Borders” in
the Set Up menu to
“Yes”?
c Set “Borders” to “No” by selecting
Menu - Set Up - Borders. (.page
49)
• Is the aspect ratio of the
image correct?
c Depending on the type of digital
camera used, the aspect ratio of the
recorded image differs, so the image
may not be printed covering the entire
printable area.
Even if I set
“Borders” to
“No”, the image
is printed with
borders on both
sides.
• Is the image edited and
saved with “Borders” set
to “Yes”?
c When you edit and save an image in
the postcard or 3.5 x 5 inch size, it is
saved as a print image including the
blank areas. Even if you print it with
“Borders” set to “No”, you cannot
eliminate the borders on both sides of a
print. To print without borders, edit
and save an image with “Borders” set
to “No”. (.page 49)
Only part of an
image is printed.
• Did you set “Borders” in
the Set Up menu to
“Yes”?
c Set “Borders” to “Yes” to print the
whole area of an image. (.page 49)
The image is
stretched
horizontally
when printed.
• Did you rotate the image
or add other process?
c Depending on the type of digital
camera used, the image may be
stretched vertically if it has been
rotated or processed using your
digital camera. This is not because of
trouble with the printer, but because
the image was rewritten with your
digital camera.
There are white
lines or dots on
the printed
pictures.
c The print head or paper path may be
soiled. Use the supplied cleaning
cartridge to clean the head and path.
(.page 89)
78 GB
001GBFP5012TRB-UC/CED.p65
78
3/11/05, 4:23 PM
Digital Photo Printer -DPP-FP50_GB_UC2/CED/CEK/AU_ 2-599-949-11(1)