Download Seagate DiscWizard

Transcript
5.3.1
Selecting video mode when booting from the rescue media
When booting from the rescue media the optimal video mode is selected automatically depending
on the specifications of your video card and monitor. However, sometimes the program can select
the wrong video mode, which is unsuitable for your hardware. In such case you can select a suitable
video mode as follows:
1. Start booting from the rescue media. When the boot menu appears, hover the mouse over
Seagate DiscWizard item and press the F11 key.
2. When the command line appears, type "vga=ask" (without quotes) and click OK.
3. Select Seagate DiscWizard in the boot menu to continue booting from
the rescue media. To see the available video modes, press the Enter key
Figure 8: REMOVE AFTER
when the appropriate message appears.
TRANSLATION
4. Choose a video mode you think best suitable for your monitor and type
its number in the command line. For instance, typing 338 selects video mode 1600x1200x16 (see
the below figure).
5. Wait until Seagate DiscWizard starts and make sure that the quality of the Welcome screen
display on your monitor suits you.
69
Copyright © Acronis International GmbH, 2002-2013