Download BLE MODULE ISP091201 ISP091201 Bluetooth Low

Transcript
BLE MODULE
ISP091201
Contents
1. Electrical Specifications ...............................................................................................................Page 2
2. RF Performances ........................................................................................................................Page 5
3. Product Development Tools ........................................................................................................Page 8
4. Mechanical Outlines ....................................................................................................................Page 9
5. Packaging .................................................................................................................................Page 12
6. Storage & Soldering Information ................................................................................................Page 14
7. Quality & User Information.........................................................................................................Page 15
1. Electrical Specifications
Electrical Performance
Temperature range -40 to +85 °C
Parameter
Value
Unit
1.9
V
Peak current, receiver active
14.6
mA
Peak current, transmitter active
12.7
mA
Current drain, connection-less state
0.5
µA
2
µA
Supply voltage
Min. Supply Voltage
Current consumption
Static levels
Current drain between connection events
Pin Assignment
Pin
1–5
6
Name
NC
OUT_ANT
Pin function
Not Connected
Antenna In/Out
7
OUT_MOD
Module In/Out
8
9
10
GND
NC
MOSI
Ground
Not Connected
Digital input
Description
Isolated pad on application PCB for mechanical stability
This pin is connected to the internal antenna. It should be
connected to Pin 7 OUT_MOD for normal operation. During
certification the pin may be connected to an RF connector for
antenna measurement
This pin is the RF I/O pin of the BLE module. It should be
connected to Pin 6 OUT_ANT for normal operation. During
certification the pin may be connected to an RF connector for
module measurement using a Bluetooth test setup
Should be connected to ground plane on application PCB
Isolated pad on application PCB for mechanical stability
ACI Master Out Slave In
May 29, 2015
Document Ref: isp_ble_DS091201_R19.docx
Page 2/18
Insight SiP – Green Side – 400 avenue Roumanille – BP 309 – 06906 Sophia-Antipolis Cedex – France – www.insightsip.com
The information contained in this document is the property of Insight SiP and should not be disclosed to any third party
without written permission. Specification subject to change without notice.