Download Set-up in PROFIBUS-DP

Mounting and installation
Service interface
The service interface connects the BL ident ®-interface module to a PC. With the software
I/O-ASSISTANT the interface module can be projected and diagnostic messages can be
indicated.
The service interface must be connected to the PC with a special, ready-made cable to be
used for this purpose.
„ TURCK connection cable (I/O-ASSISTANT-cable BL20/BL67; Ident No.: 6827133)
The cable has a PS/2-connector (for connecting the female connector to gateway) and a
SUB-D female connector (for connecting the connector to the PC).
Figure 19:
PS/2-connector
on the
connection
cable to the
gateway (top
view)
4 3
5
2
6
5
Figure 20:
9-pole SUB-D
female
connector on
the connection
cable to the PC
(top view)
4
9
Figure 21:
Connection
between PC
and BL67interface
module with the
TURCK
connection
cable
1
3
8
2
7
1
6
B
C
A
2-26
D101579 1208 - BL ident ® PROFIBUS-DP