Download Commissioning with the software CoDeSys for

Startup of the TURCK BL ident ®-system with CoDeSys
Startup with BLxx-2RFID-S modules
The following describes the startup of a BL ident ®-systems with a BLxx-2RFID-S-module in
a programmable gateway with the use of the programming software CoDeSys from the
company "3S".
A first startup should be simple and possible without programming knowledge.
The following explanations are valid for all interface modules with programmable Ethernet
gateways and BLxx-2RFID-S-modules.
Hardware description of the sample project
The following hardware components were used for the example startup:
„ BL ident ®-interface module "TI-BL67-PG-EN-S-2"
„ BL ident ®-read/write head "TN-CK40-H1147"
„ Data carrier "TW-R30-B128" (user data=112 bytes)
„ Suitable connection and supply cables
Please download D101583 which you may find in the download area of the TURCK website
if you have questions or if you desire clarification concerning the read/write heads and the
data carriers.
Installation of the software "CoDeSys"
If you install the CoDeSys software directly from the BL ident ®-CD (Ident-No. 1545052), you
will automatically have the correct version.
Note
Please note that CoDeSys Version 2.3.6.4 is required for BL ident ®-system startup!
3-30
D101640 0109 - BL ident ® CoDeSys