Download here - Mellanox

Transcript
Mellanox OFED for Linux User’s Manual
1.5.2-2.1.0-1.1.1000
2. List the status of specific ports of specific devices.
> ibstatus mthca0:1 mlx4_0:2
Infiniband device 'mthca0' port 1 status:
default gid:
fe80:0000:0000:0000:0002:c900:0101:d151
base lid:
0x0
sm lid:
0x0
state:
2: INIT
phys state:
5: LinkUp
rate:
10 Gb/sec (4X)
Infiniband device 'mlx4_0' port 2 status:
default gid:
fe80:0000:0000:0000:0000:0000:0007:3897
base lid:
0x1
8.10 ibportstate
Applicable Hardware
All InfiniBand devices.
Description
Enables querying the logical (link) and physical port states of an InfiniBand port. It also allows
adjusting the link speed that is enabled on any InfiniBand port.
If the queried port is a swich port, then ibportstate can be used to
• disable, enable or reset the port
• validate the port’s link width and speed against the peer port
Synopsis
ibportstate [-d] [-e] [-v] [-V] [-D] [-G] [-s <smlid>] \
[-C <ca_name>] [-P <ca_port>] [-t <timeout_ms>] \
[<dest dr_path|lid|guid>] <portnum> [<op> [<value>]]
Mellanox Technologies
Mellanox Technologies Confidential
163