Download english
Transcript
Precautions for Use Important Information Cautions when transporting zz When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. Doing so may damage the internal parts and result in malfunctions. zz Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet. Cautions when installing JJ Do not set up the projector outdoors. zz The projector is designed for indoor use only. JJ Do not use under the following conditions. zz Places where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal parts and result in malfunctions. zz Near the exhaust of an air conditioner or near lights (studio lamps, etc.) where temperature changes greatly (Operating environment Æpage 78): Doing so may shorten the life of the lamp or result in deformation of the outer case and malfunctions. zz Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector. JJ Be sure to ask authorized personnel or your supplier when mounting the product to a ceiling or wall. This requires an optional ceiling mount bracket. Model No.: E T-PKV100H (for high ceilings), ET-PKV100S (for low ceilings), ET-PKC100B (Projector Mount Base), ET-PKC100W (Wall Mount Bracket). JJ When using the projector in the elevation of below 1 000 m, make sure [Fan control] is set to [Off]. Failure to do so may shorten the life of the internal parts and result in malfunctions. JJ When using the projector in the elevation of above 1 000 m and below 2 000 m, make sure [Fan control] is set to [On 1]. Failure to do so may shorten the life of the internal parts and result in malfunctions. JJ When using the projector in the elevation of above 2 000 m and below 2 700 m, make sure [Fan control] is set to [On 2]. Failure to do so may shorten the life of the internal parts and result in malfunctions. JJ Do not install the projector at elevations of 2 700 m (8 858 ft) or higher above sea level. Failure to do so may shorten the life of the internal parts and result in malfunctions. 12 - ENGLISH