Download USER MANUAL

Tools Needed
TIP! Make a tool board
for the tools you use, and
place it near the planer
so that you can easily
reach it. Look at the tool
board before starting
the machine in order to
make sure that no tool is
missing. Perhaps there
is a tool left inside the
machine!
30 mm spanner
(supplied)
10 mm spanner
(supplied)
4 mm Allen key
(supplied)
6 mm Allen key
(supplied)
13 mm ring spanner
10 mm ring spanner
Adjustable spanner
Vernier calliper
Ruler 30-50 cm (12-20”)
Side cutter crank (1)
Feed table mounting plates (2)
Upper cutter
setting block (1)
Table adjustment
crank (1)
Control panel
mounting bolts and
washers (2)
Spanners (2)
30 & 10 mm
Feed table bolts and
washers (4)
Accessory:
Spindle adapter,
30 mm to 1-1/4’’
Side cutter spacers (19)
Coach screws, feed
table (4)
Allen keys (2)
6