1
Download the manual
Transcript
P a g e | 143 define custom input messages and decode the results and assign to specific variables. 4.5.1 INI File Variables You may define these input variables for each anchor These are intended to be read from custom input messages Anchor1.WinchTension The winch tension in kN Anchor1.PayoutLength Length of the anchor wire in metres Anchor1.PayoutSpeed Payout speed in metres / sec (and so on for Anchor2 etc) 4.5.1.1 BSPEngine Variables If the vessel definition contains one or more anchors then BSPEngine will provide the following variables for each anchor: Anchor1.Name Name of the anchor as defined in the vessel definition Anchor1.Status A string “Racked”, “Up” or “Down” – Up means towed by a Tug Anchor1.Name Name of the anchor as defined in the vessel definition NAVSYSTEMS Blue Spider User Manual Jun 2013
