Download TriCore AUDO-NG Flash Using Bootstrap Loader

Transcript
AP32136
TriCore - AUDO-NG Flash Download via Bootstrap Loader
ASC Bootstrap Loading
2
ASC Bootstrap Loading
The communication between PC and the target device is established via the ASC
interface. Figure 2-1 shows a hardware setup for this application, in which the following
two pins are used as RxD and TxD, respectively.
•
•
receive pin RxD at pin P3.0 (TC1766) or P5.0 (TC1796) respectively
transmit pin TxD at pin P3.1(TC1766) or P5.1 (TC1796) respectively
PC
COM
Port
RxD
RxD
TxD
TxD
Target
TriCore
GND
Figure 2-1
The connection between a PC and the target system for TriCore
Bootstrap Loading
The flash loader itself is divided into two parts: Loader 21) and Loader 3. The bootloader procedure is shown in Figure 2-2.
1) The built-in Bootstrap Loading mechanism handles the first interaction between PC and target device and can
be considered as Loader 1.
Application Note
3
V 1.0, 2008-11