Download MAINTENANCE MANUAL OPERATION AND

Mod. Mini Agri
Getting to Know and Using the Vehicle
WATER HEATER
(OPTIONAL)
(fig.100/C Pos.”1”)
1
Located at the rear of the bonnet.
- ATTENTION:
Before switching on the water heater, carry out the operations included in Chapter B “STOPPING UPON COMPLETION OF WORK”
System operation:
1. Plug in connector “A” into socket “B” located in the rear
part of the engine bonnet (fig.101/C).
(fig.100/C)
2. Insert plug “C” into the electric socket (fig.101/C).
The heater is connected to its own control unit and maintains
engine water at a temperature higher than the external
temperature (in cold climates).
A
B
In the event of malfunction contact a DIECI service centre.
- ATTENTION:
Verify the good conditions of the power supply cable before
starting up the device.
- ATTENTION:
Do not use the water heater with the engine on and while the
vehicle is moving.
- ATTENTION:
C
Remove water heater power supply before switching on and
moving the vehicle.
(fig.101/C)
7-pole electric socket for trailer
(Optional)
(fig.102/C Pos.”A”)
Located at the rear of the vehicle.
- ATTENTION:
Before moving the vehicle with the trailer:
- Ensure that the brake and signalling systems are functioning properly.
- Verify that the trailer conforms to regulations in force in
the country where the vehicle is being used.
(fig.102/C)
A
C/46
- ATTENTION: - Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.