Download WARNING

Operation & Maintenance Manual──LG918 Wheel Loader
z
Please read the user manual for all of the attachments and the contents in the manual that refers to
an attachment when the attachment is being assembled and used.
z
Do not use attachments that are not sold by Shandong Lingong Construction Machinery Co. Ltd
or the sellers specified by Shandong Lingong Construction Machinery Co. Ltd. Using
unauthorized attachments may cause safety problems and go against the normal operation of the
machine, which can influence the service life of the machine.
z
Shandong Lingong Construction Machinery Co. Ltd assumes no responsibility for any injury,
accident, or destruction of the machine induced by using unauthorized attachments.
4. STARTING SAFELY
4.1 Before Starting Engine
4.1.1 Safety Operation at Working Area
z
Before starting operations, thoroughly inspect the area for any unusual conditions that could be
dangerous.
z
Examine the condition of the ground and the quality of the soil in the work area, and determine
the proper method of operation. Before starting work, the ground should be planed and pressed
firmly. If there is a lot of sand and dust, sprinkle with water first.
z
When working on public roads, there should be a trained person managing the traffic. Erect the
barricades and use the sign of DON’T ENTER to ensure safety of passing traffic and
pedestrians.
z
In the places where objects are buried such as water pipes, gas pipes, or high-voltage cables,
contact the responsible companies to confirm the position of the buried objects and take care not
to damage them during operations.
z
When working in water, swampland or passing a sand bank, check the ground conditions, speed
and depth of the water. Be sure not to exceed the permitted water depth. After working, check and
clean the positions where lubricant is needed. Please refer to CHAPTER II–6
CIRCUMSTANCES REQUIREMENT for the depth of water for passage.
z
Be sure there are good ventilation conditions when working in a close environment.
4.1.2 Check before Starting the Engine
z
Check the machine carefully before starting work. Report to the manager if there is any abnormal
condition. Operate only after the abnormal conditions are resolved.
z
To avoid fire, check whether there are any flammable materials such as wood chips, leaves and
17