Download Owner`s manual Obree

Owner’s manual
6.5. Charging the battery
6.5.2 Charging process
Completely charge the battery before using it for the first time.
The battery's state of charge in general is 30% upon delivery. The
battery may be charged in every state of charge without affecting
the life cycle. The battery reaches its maximum life cycle if charged
at an ambient temperature between 10°C and 30°C
When charging the battery, follow the operating instructions of the
charger.
6.5.1 Connecting the charger
The battery [1] does not have to be removed from the Pedelec to
charge it, but may remain there. Proceed as follows.
• Insert the charger's plug into the socket on the battery.
• The two parts are automatically correctly aligned and locked by a
magnetic lock.
• Charge the battery in accordance with the specifications of the
charger's operating instructions. Also observe the instructions as
to the charging process contained in section 2.3.
Before inserting the plug into the socket, make sure that both
parts are clean and do not contain any metallic particles. If they
contain metallic particles, these particles must be removed using a
clean dry cloth.
54
Also observe the safety instructions and warnings included in
sections 2.3 and 2.5