Download User`s Manual

Transcript
CMB2107 Features
Section 1 Introduction
This user’s manual explains connection, configuration, and operation information for the
MMCCMB2107 Controller and Memory Board (CMB2107), a development tool of Motorola’s
M•CORE™ family. The CMB2107 lets you develop code to be embedded in an MMC2107
microcontroller unit.
As a standalone tool, the CMB2107 uses an RS232 connection to your computer. This connection
lets you use Motorola’s M•CORE System Development Software (SysDS), the GNU source-level
debugger, or the Metrowerks MetroTRK debug software. The SysDS consists of a loader, the
Picobug monitor, and a built-in selftest. The CMB2107 also has a OnCE™ connector, enabling you
to use a debugging application that requires one.
Optionally, you may use the CMB2107 with a different emulator product, such as the Motorola
Embedded Background Debug Interface (EBDI), or the Metrowerks CodeWarrior® integrated
development environment.
Motorola's SysDS loader lets you download your code into the CMB2107's SRAM (for execution)
or FLASH memory (for execution or for storage in non-volatile memory).
The CMB2107 will combine easily with other, optional development boards from Motorola, such
as the MPFB1200 Platform Board. Such an optional board expands CMB2107 capacity, enhances
CMB2107 performance, or adds to CMB2107 features.
1.1 CMB2107 Features
The CMB2107 features:
•
144-pin, quad flat pack MMC2107 resident MCU.
•
2 megabytes FLASH memory.
•
2 megabytes FSRAM (fast static RAM), configurable for 16- or 32-bit operations.
•
Xilinx complex programmable logic device (CPLD).
•
Power supply that converts line power to 12-volt input power.
•
Two RS232 serial communication ports.
•
OnCE connector.
•
Four user-accessible LEDs.
•
Two DIP switches for system configuration and firmware selection.
•
User prototyping (breadboard) area.
MMCCMB2107UM/D
User’s Manual
9