1
Download Narrowband Services - Alcatel
Transcript
Configuration management for narrowband services
Creating a new routing table entry
GATEWAY
=
Gateway IP Address. The gateway address is the IP address of
the gateway through which packets are sent to the destination address. The gateway must be on a
directly connected network or
subnetwork, that means the
gateway’s network portion of an
IP address and the corresponding interface’s network portion of
an IP address must match.
METRIC
=
{1}
metric number
The metric number is reserved
for future releases to indicate a
number of hops needed to
traverse to get to the required
destination. In current release
the Metric parameter is always 1.
Step 2.
Observe the response provided by the system. If the command is
rejected, correct the problem and repeat. For detailed information on
the command and the error responses see the ENT-ROUTE section
in the TL1 command description (in HTML format) which is available
on the customer documentation CD-ROM or via the GSI menu option Help/Commands/Procedures.
End of steps
363-211-112
Issue 7
December 2000
4-219
