Download Solar analyzer for solar modules SYSLAB

F. SOFTWARE KEYBOARD
G. ZERO Calibration
Users can use SOFTWARE KEYBOARD to type in characters, numbers and
Calibration of voltage and current zero would improve the accuracy of the
symbols.
instrument before usage.
1. Move to the item where you want to change the characters (e.g.
First connect “4-wire to 2-wire cable” with the Analyzer, then connect 2
Module).
testing clips (black & red) with ““4-wire to 2-wire cable”. Connect these 2
ZERO
2. Press
button or
button to move the cursor to the place where
testing clips with each other and press
button. The LCD will
display “ZERO CAL…” message. When this message disappears, the
ZERO Calibration is completed.
you want to type in a character.
Regular ZERO Calibration would maintain the accuracy of the instruments.
3. Press
(SOFTWARE KEYBOARD) button then the display will be
as below.
4. In the SOFTWARE KEYBOARD display, press
or
button to select a character, then press
or
or
(SOFTWARE
KEYBOARD) button again to confirm this change.
29
30