Download LOGIQ Book Basic User Manual

Transcript
Measurement and Calculation Setup
Selecting an exam category
When you open the Measurement & Analysis screen, it displays
the exam category that was last used on the system. To select
the exam category you want to work with:
1. Move the Trackball to highlight the exam category at the
top of the Selection menu.
2. Press Set.
The system displays a list of exam categories. See Figure 75.
3. Move the Trackball to highlight the exam category you
want.
4. Press Set.
The Selection menu lists studies and measurements for the
selected exam category.
Figure 7-5.
LOGIQ Book Basic User Manual
Direction 2321062-100 Rev. 5
Select Exam Category
7-17