Download LOGIQ Book Basic User Manual
Transcript
Measurement and Calculation Setup Selecting an exam category When you open the Measurement & Analysis screen, it displays the exam category that was last used on the system. To select the exam category you want to work with: 1. Move the Trackball to highlight the exam category at the top of the Selection menu. 2. Press Set. The system displays a list of exam categories. See Figure 75. 3. Move the Trackball to highlight the exam category you want. 4. Press Set. The Selection menu lists studies and measurements for the selected exam category. Figure 7-5. LOGIQ Book Basic User Manual Direction 2321062-100 Rev. 5 Select Exam Category 7-17
Related documents
LOGIQ 9 Quick Guide, Direction 2309820-100
BC72785_X-QAM Twin 6S2 user manual
pdf, 7,47 MB
GE LOGIQ e user guide
LOGIQ P5/A5/A5Pro Quick Guide
GE LOGIQ S7 Pro User Guide
Portable mobile unit
3 - Tranglos Software
ICS通信速度設定マニュアルVer1.1
Vi3010 Operational Manual
GE Healthcare
Super Series User Manual
User manual - Supercontrols
LOGIQ S7 Expert
chapter 4
User`s Product Manual
GE LOGIQ S7 Expert Data Sheet
SEAT Portable System
Voluson™ E8/E8 Expert Basic User Manual
GSW-1005MS - Datainterfaces.com
Sonoline G40 Knobology Guide
AT-570 User Manual English_Rev1_1