Download XFile 02.19 User`s Manual
Transcript
XFile Version 2.19 – User Manual Issue 2.19.A EVS Broadcast Equipment – November 2012 These settings will have priority on the default settings defined in the Jobs tab of the XStream Configuration window. XFile Clipname Specifies the name of the clip that XFile will create for the backup of the record train(s). The same clipname is assigned to each record train that is backed up in a given job. Output File Format Seven different output formats are available to save the files: EVS MXF 2 MB, MXF OP1a (SD IMX Only), Quick Time Movie, Quick Time Reference, Transfer to Avid Ingest Device, Avid MXF OPAtom and Avid OP1a (Std SMPTE). Path Manually select/modify the path for this recording to the correct folder/disk. Filename Allows to specify an automatic filename for each possible file format selected in the Output Mode group boxes. See also section ‘Format String’ on page 128 and ‘How to Modify the Default Format String for the Filename’, on page 129. If the filename is not filled in, the default filename will be used. The approximating filename is displayed below this field. It takes into account the expected values for the fields included in the filename. Output Mode It is not mandatory to use Secondary and Third outputs. When no output format is selected from the Output Mode field, Output Disabled is displayed. Compulsory Output for Secondary and Third Output Modes When the Compulsory Output check box is selected, all the jobs must be completed. If the backup of the compulsory output failed, the entire job will be stopped. 153