Download EZI33XLT Scanner

TROUBLESHOOTING
If your EZI33XLT is not performing properly, try the following
steps.
Problem
Improper
reception.
Possible Cause
Suggestion
The scanner’s
antenna might
need to be
adjusted.
Check the antenna connection
or move or reposition the
antenna.
Move the scanner.
You might be in a remote
area that could require an
optional multi-band antenna.
Check with your dealer or local
electronics store.
Scan won’t The squelch
might need to be
stop.
adjusted.
Adjust the squelch threshold.
See “To adjust the squelch” on
page 17.
The antenna
might need to be
adjusted.
Check the antenna connection.
The channel’s
frequency might
not be stored in
favourites.
Make sure the channel’s
The channel might
not be active.
Wait for a transmission on the
channel.
frequency is stored in the
scanner’s favourites bank.
Scan won’t You must be service Press (Srvc/Fav). If HOLD
or favourites mode. is showing press (Hold) to
start.
resume.
UNIDEN EZI33XLT
UB366AV_EZI33XLT_0119.indd 23
The squelch
might need to be
adjusted.
Adjust the squelch threshold.
See “To adjust the squelch” on
page 17.
The antenna
might need to be
adjusted.
Check the antenna connection.
23
Scanner
2012/01/19 20:58:20