Download Users Manual - TC Electronic
Transcript
EFFECTS – REVERB & EQ low and high frequency ranges. The two Color parameters can really change the characteristics and style of the reverb – from “dark” and “ambient” to “crisp” and “bright”. Hi Lev & Lo Lev – (High Level/Low Level) Range: -25 to 25 Use the Hi Lev and Lo Lev parameters to emphasize or attenuate the selected Hi and Lo Color types. Early Range: -100 to 0dB This parameter sets the level of the reverb’s initial reflections (early reflections). EQ – Parametric The G-System features a 3 band parametric equalizer. You can use this EQ either to shape the sound of individual presets or – in the Lock Mode set via Utility – as a “master EQ”. For each band, the following parameters are available: Gain Range: -12dB to +12dB Use this parameter to attenuate or boost the frequency range selected with the Freq(uency) parameter. RevLev – Reverb Level Range: -100 to 0dB This parameter sets the Level of the reverb’s diffuse field. Freq Range: 20Hz to 20kHz This parameter sets the center frequency of the frequency range that you want to attenuate or boost. Diff – Diffuse Range: -25 to 25 With this parameter, you can fine-tuning the density of the reverb’s diffuse field. It is set automatically when you select a Decay time and allows you to reduce flutter in the diffuse field to an absolute minimum. Width Range: 0.1 to 4 octaves This parameter sets the width of the frequency range around the frequency specified by the Freq(uency) parameter. Mix Range: 0 to 100% This parameter sets the relationship between the dry signal and the level of the effect in this Effect Block. Enable Range: Off/On The effect’s status. All settings are stored as part of the preset even if this particular effect is disabled. OutLev – Output Level Range: -100 to 0dB This parameter sets the overall Output level of this Effect Block. Enable Range: Off/On The effect’s status. All settings are stored as part of the preset even if this particular effect is disabled. 73