Download User Manual - Cctv Security System

Section 4 - Configuration
Mail
This section allows you to configure the e-mail notification settings for your camera.
SMTP Server This is the domain name or IP address of your external e-mail server.
Address:
SMTP Server This is the port used by your external e-mail server.
Port:
Sender E-mail This is the e-mail address of the account sending the camera images.
Address:
Receiver E-mail This is the e-mail address to send the images to.
Address:
User Name: If the SMTP server uses authentication, you must enter your User Name here.
Password: Enter the Password that corresponds to your user name to connect to the SMTP
server.
For example, if you want to use Gmail by SSL-TLS for e-mail notification, you can follow these steps:
Step 1 - Enter smtp.gmail.com in the SMTP Server Address field.
Step 2 - Change the SMTP Server Port number from 25 to 465.
Step 3 - Enter your gmail E-mail Address in Sender E-mail Address.
Step 4 - Enter the destination E-mail Address in Receiver E-mail Address.
Step 5 - Enter the User Name required to access the SMTP server.
Step 6 - Enter the Password required to access the SMTP server.
Step 7 - Select SSL-TLS and then click Save Settings.
Step 8 - Click Test at the bottom of the screen to send a test e-mail to the Receiver E-mail Address.
Note:
• If you want to use STARTTLS, use SMTP server port 587.
•
If you want to use the Yahoo SMTP server, the SMTP server address will be different between each
registered region. It only supports using SMTP server port 465 for SSL-TLS.
D-Link DCS-930L User Manual
38