Download ZXMatrix manual
Transcript
• • • • 0: for a package, or an Interface 2 ROM (or any other ROM that does not require ResiDOS support) 1: for a BASIC ROM 16: to install the ROM into the writeable "RAM" part of the interface memory (the non-writeable "ROM" part is used by default) 32: to disable the NMI button for this ROM (only affects BASIC ROMs) If you don't specify a value, then the default of 0 will be used. If you are installing a package, then any value except 0 will be ignored, since packages include their own information telling ResiDOS how they should be installed. Note that it is generally advisable to only store BASIC ROMs into the non-writeable "ROM" part of the memory, since unless they have been specifically patched they tend to overwrite themselves. A couple of examples are: • • • • CLEAR 32767 %INSTALL "SEBASIC.ROM",1 %INSTALL "c:jetpac.rom",0 %INSTALL "FATfs.pkg" Installing ROMs already loaded into memory An alternative installation method is to load the ROM image into memory, and then install it directly from there. Since this allows you to load from tape, it is handy for installing packages like FATfs when you don't have access to the flashdrive. To use this method, first CLEAR to a suitable address, and then load in the ROM to above this address. For example: • • CLEAR 39999 LOAD "FATfs" CODE 40000 Then the ROM can be installed by using the following form of the %INSTALL command: • %INSTALL "name"@address,n As before, the "n" value is optional. To install the package just loaded in the previous example, use: • %INSTALL "FATfs"@40000 Managing alternative ROMs You can see a list of all the installed ROMs in your interface by using the following commands (the second version includes hidden ROMs, used by the system but not selectable by the user): • • %ROMS %ROMS+ You can uninstall any ROM using the following command (this only removes it from the interface memory, not from the flashdrive): • 16 %UNINSTALL "name"