Download VoIPIngate User Manual

3.2.4 Saving the Configuration Changes
Once a change is made, the user should press the “Update” button in the Configuration Menu. The IP
phone will then display the following screen to confirm that the changes have been saved.
Users are recommended to power cycle the VOIP Client-488 after seeing the above message.
3.2.5 Rebooting the VoIP Client ATA from a Remote Location
The administrator of the phone can remotely reboot the phone by pressing the “Reboot” button at the
bottom of the configuration menu. Once done, the following screen will be displayed to indicate that
rebooting is underway.
At this point, the user can relogin to the phone after waiting for about 30 seconds.
May 30, 2005
VoIP Client ATA
24