Download Alien Pro Instructions

Note: Only one view tampering area can be setup per camera.
7. Alarm schedule setup: When there is a view tampering alarm present, the DVR
will handle the alarm based on the schedule selected. You can set 4 periods for each
day of the week. You can copy the schedule of one day to other days.
Note: Time periods must not overlap. You must reboot the DVR before the settings
take effect.
8. Setup alarm policy: If a view tampering alarm occurs while the schedule is active
the DVR will respond based on the policy Selected. You can select one or more of the
following: “On Screen Warning”, “Audible tone”, “Upload to Center”, “Trigger
Alarm Output”and “Send E-mail”. Use the [ â ] [ á ] and [EDIT] key to enable or
disable selections. “×”is disable and “ü ”is enable.
9. Save alarm setup: After selecting the setup parameters, press “Confirm”to
return “Camera Input Adjustment ”menu. In the “Camera Input Adjustment”menu
press “Confirm”to save the setup and return to the main menu, or “Cancel”or [Esc]
to abort.
10. Save all cameras: If you want to setup additional cameras, repeat steps two
through eight. In “Image Setup”menu, press “Confirm”to save all camera
parameters. Press “Cancel”key or [ESC] key to abort.
6.8 Video Loss Alarm
This feature provides an alarm when camera input video is lost.
1. Enter the “Camera Input Adjustment”
menu:
2. Select camera: Use [ â ] [ á ] keys to
select a camera and select “Advanced
settings”.
3. Select the “Handle”option next to
“Signal Loss.”
4. Setup alarm schedule: Enter “Policy”to setup alarm schedule. A video loss alarm
will be generated only during the scheduled times selected.
Note: The 4 time periods can be selected per day. The timeframes may not overlap.
The DVR must be rebooted before the settings take effect.
45