Download USER MANUAL - CNET Content Solutions

English
CONTROLS AND FEATURES
To select the TimeShift Size:
To perform a USB HDD operation test:
a
In the Recording Setup screen, press B / b to
select TimeShift Size.
a
b
Press c and B / b to select 512 MB, 1 GB, 2 GB
or 4 GB and press OK.
To use TimeShift recording:
In the Recording Setup screen, press B / b to
select Device Test and press OK.
USB HDD operation test will start.
Wait until the test ends.
NOTE: The results of the device test are only a guide. The
device may not function as shown in the results.
Time Shift recording allows you to pause live TV for a
fixed period of time.
To format a USB HDD:
For Example: If you move away from the TV for a short
period, such as when the phone rings while you are
watching TV, you can easily pause live TV and then
continue to view from the same point in the programme
when you return.
a
In the Recording Setup screen, press B / b to
select Format Device and press OK.
b
Press C / c to select Yes in the confirmation
window that will appear and press OK. Formatting
will start.
Wait until formatting ends.
a
b
c
Press W on the remote control while viewing the
DTV programme.
The screen will switch to a still image and
recording will start automatically.
The recording time is decided by TimeShift Size.
If the TimeShift file size reaches the limit set, then
the TV will continue to be paused, but the oldest
recorded data will be disappeared up to a
maximum of the TimeShift Size.
Press c (play).
Catch-up viewing will start from where the
programme was paused.
Press v (stop) to stop the recording.
To set the padding time for programmed
recording start time and end time:
a
In the Recording Setup screen, press B / b to
select Start Padding Time.
b
Press B / b to select a time.
You can select from None, 3 Minutes, 5 Minutes,
10 Minutes, 15 Minutes, 30 Minutes, and 45
Minutes.
NOTE:
• If the USB HDD is separated several partitions by PC
and multiple Partition appear on the Device List screen,
press B / b to select the Partition you want to format.
• When the USB HDD (or Partition) is formatted, all the
data stored on the USB HDD (or Partition) will be
deleted.
Scheduling priority
If scheduled time slots are next to each other and there is
more than one minute between the end time of the first
schedule and the start time of the next schedule,
programmed recording will be performed correctly.
• When Start Padding Time and End Padding Time are
set (see page 62), the start time and end time will be the
time plus the additional minutes.
If scheduling times overlap, priority will be given to the
programmed recording which starts first. When the
programmed recording that started first ends, recording
will switch to the next scheduled programme. At this time,
depending on how far the scheduling times overlap, the
beginning section of the next scheduled programme may
not be recorded.
Recording will start at the selected number of
minutes prior to the recording start time.
c
Press B / b to select End Padding Time.
d
Press B / b to select a time.
You can select from None, 3 minutes, 5 minutes,
10 minutes, 15 minutes, 30 minutes, and 45
minutes.
Recording will end at the recording end time plus
the selected number of minutes.
62