Download Quadrus MINI User`s Manual - Vision

Symbologies
BC412
Usage:
Definition:
Serial Cmd:
Default:
Options:
Widely used in semiconductor manufacturing. Particularly useful where
speed, accuracy, and ease of printing are required.
BC412 (Binary Code 412), a proprietary IBM symbology since 1988, is an
alphanumeric symbol with a set of 35 characters, each encoded by a set of
4 bars in 12 module positions. All bars have a single width; it is the presence
(1) or absence (0) of bars in each of the twelve module positions that make
BC412 binary.
This symbology is also bi-directional and self-clocking, with a start character
and a stop character.
Note: BC412 is not supported when Q-Mode is enabled.
<K481,status,check character output,fixed symbol length status,fixed symbol
length>
Disabled
0 = Disabled
1 = Enabled
Check Character Output (BC412)
Usage:
Definition:
Serial Cmd:
Default:
Options:
Check Character Output, added to the symbol, provides additional
security.
When enabled, the check character character is read and compared along
with the symbol data. When disabled, symbol data is sent without the check
character.
<K481,status,check character output,fixed symbol length status,fixed
symbol length>
Disabled
0 = Disabled
1 = Enabled
Fixed Symbol Length Status (BC412)
Definition:
Serial Cmd:
Default:
Options:
When enabled, the imager will check the symbol length against the symbol
length field. If disabled, any length will be considered valid.
<K481,status,check character output,fixed symbol length status,fixed
symbol length>
Disabled
0 = Disabled
1 = Enabled
Fixed Symbol Length (BC412)
Definition:
Serial Cmd:
Default:
Options:
When enabled, the check character character is read and compared along
with the symbol data. When disabled, symbol data is sent without the check
character.
<K481,status,check character output,fixed symbol length status,fixed
symbol length>
10
1 to 64
Quadrus MINI Imager User’s Manual
6-15