Download Quadrus MINI User`s Manual - Vision

Matchcode
Wild Card Character
Usage:
Definition:
Serial Cmd:
Default:
Options:
Example: With Wild Card Character defined as the default asterisk,
defining CR*34 as the master symbol will result in matches for CR134
and CR234, but not CR2345. Entering the wild card at the end of the
master symbol, as in CR*, will result in matches for variable symbol
lengths such as CR1, CR23, CR358, etc.
Wild Card Character allows a user to define a wild card character as part
of the master symbol.
<K223,matchcode type,sequential matching,match start position,match
length,wild card character,sequence on No Read,sequence on mismatch>
* (asterisk)
Any ASCII character.
Important: The ASCII characters <, >, and , can only be entered as hex pairs:
For <: <K223h,,,,,3C>
For >: <K223h,,,,,3E>
For , : <K223h,,,,,2C>
See ASCII Character Entry Modifier on page 3-32 for a detailed explanation of how to
enter ASCII characters as hex values.
Quadrus MINI Imager User’s Manual
9-7