Download RX Debug - Renesas Electronics

CubeSuite+ V1.01.00
CHAPTER 2 FUNCTIONS
Note Each piece of data are separated with a comma (,) when saved.
To avoid the problem of an invalid file format in cases where any data includes a comma (,), each piece
of data are enclosed in double-quotes (" ") when they are output to a file.
(c) Specifying the [Save Range Address/ Symbol]
Specify the "start address" and "end address" to set a range of data to be saved in a file.
Directly enter hexadecimal values or address expressions in the respective text boxes or select an input
history item from the drop-down list (up to 10 history entries).
Note that if a range is selected on panel, this selected range is specified, by default, in the text boxes. If no
range is selected, the currently displayed range on panel is specified.
Remark
By holding down [Ctrl]+[Space] keys in this text box, you can complete the symbol name at the present
caret position (see "2.20.2 Symbol name completion function").
(d) Clicking the [Save] button
Disassembled data is saved in specified format to a specified file.
Figure 2-75. Disassembled Data Output Image when Saved
-------------------------------------------------------Label (symbol name)
:
Label (symbol) line
File name
:
Line number
:
C language source text
:
Source text line
Address Offset
:
:
Code
:
Result of Disassembling
:
Disassembling line
Remarks 1.
If panel contents are saved over an existing file by selecting [Save Disassembled Data] on [File]
menu, the respective Disassemble panels (disassembly 1-4) are handled individually.
Also, as to the save range, the previously specified address range is applied when data is saved.
2.
2.6.3
By selecting [File] >> [Print...], you can print the image currently displayed on this panel.
Executing a build in parallel with other processes
CubeSuite+ provides a facility to automatically start a build in synchronism with the timing described below (rapid build
function).
(1) For other than the debug-only project
- When any of the C source files, C++ source files, assembler source files, header files, link directive files,
symbol information files, object module files, relocatable module files or library files added to the project is
updated
- When a file to build is added or removed from the project
- When the order in which object module files is linked is changed
- When the properties of the build tool or the file to build are changed
(2) For the debug-only project
- When a C source file, C++ source file, assembler source file, or header file added to the debug-only project is
saved after editing
- When a C source file, C++ source file, assembler source file, or header file is added or removed from the
debug-only project
- When properties of the debug-only project are changed
R20UT0769EJ0100 Rev.1.00
Oct 01, 2011
Page 69 of 429