1
Download Operating Instructions
Transcript
Adjusting the recording level manually (Manual recording) When you record, the sound level is adjusted automatically. If necessary, you can set the level manually. ./> >MENU. ENTER X REC Note Adjust the recording level while the recorder is in standby mode. You cannot adjust it while recording 1 While holding down X, slide REC to the right. The recorder stands by for recording. 2 Press ENTER, press >MENU. repeatedly until “RecVolume” flashes in the display, and then press ENTER again. 3 Press >MENU. repeatedly until “ManualREC” flashes in the display, and then press ENTER. ManualRec To switch back to the automatic control, Press >MENU. repeatedly until “Auto REC” flashes in the display, and then press ENTER. 4 Play the source. continued 23
