Download Image for Linux User Manual

Virtual Drive; select the interface of the drive that contains the existing
backup. The Select Existing Backup File To Use/Select File Drive screen
appears; select the hard drive that contains the existing backup from the list
shown. Image for Linux displays the Select Existing Backup File To
Use/Select File Location on HDn screen; select a partition on the hard
drive if it contains partitions; otherwise, press Enter to select the drive.
7.
*
If you chose File (OS), a screen appears where you can select the existing
backup file name.
*
If you chose File (CD/DVD), the Select Existing Backup File To
Use/Select Drive Interface screen appears. Select either ATAPI/SCSI or
SG. Then, insert the first disc in the set and then select the corresponding
CD/DVD/BD drive from the list.
On the Select Existing Backup File To Use screen that appears, select the
.TBI file that corresponds to the desired existing backup. You can type the
name of the .TBI file (you don’t need to type the .TBI file extension) or you
can press Tab and then use the arrow keys to highlight the file and press
Enter to select it. If the .TBI file resides inside a folder, highlight the folder
and press Enter to display the contents of the folder.
If you open a folder and want to navigate back to the parent folder, select the ..
list item and press Enter.
Image for Linux User Manual
Page 51 of 181