Download User Manual

SKOPE BME ActiveCore
Electronic Controller
Introduction The chiller is fitted with a Carel S4 electronic controller which is visible
through a cutout in the cabinet front panel. The electronic controller is preprogrammed and requires no initial setup or additional programming.
SKOPE does not recommend that the settings be changed unless it is
absolutely necessary.
CAUTION
The electronic controller must only be adjusted by an
authorised service agent.
To achieve energy efficient operation, the electronic controller uses
temperature probes and door switches to monitor chiller usage and switch
the chiller between ‘Normal’ and ‘Energy Saving’ modes, control and display
the chiller temperature, collect data, signal temperature alarms and force a
defrost cycle when required.
Faceplate Because the electronic controller plays such an important role, it’s helpful to
know the parts of the faceplate you may use.
2
6 8
1
ES
7
5
3
4
No.
12
Item
Description
1
Digital display of cabinet temperature or messages. The
temperature is what the sensor inside the chiller detects, and
not necessarily the product temperature. However, they may
be very close depending on how the controller is set to sense
temperature.
2
Energy Save (up): Button. Press to view the current chiller
mode. ‘ECO’ = Energy Saving and ‘nor’ = Normal. Press and
hold for 3 seconds to switch the chiller between ‘Energy
Save’ and ‘Normal’ mode.
ES
3
Set (mute): Button. Press to mute the alarm. Press and hold
to access parameters.
4
Light (down): Button. Press and hold to switch the cabinet
lights on and off.
5
Defrost: Indicator. ON when the defrost is activated. Flashes
when the activation of the defrost is temporarily delayed due
to procedures in progress.
6
Compressor: Indicator. ON when the compressor and
condenser fan starts. Flashes when activation of the
compressor is temporarily delayed.
7
Fan: Indicator. ON when the internal cabinet fans are
activated. Flashes when activation of the fans is temporarily
delayed.
8
Alarm: Indicator. ON when alarm is signalled.
Operation
User Manual