Download M3062PT3-CPE User`s Manual

M3062PT3-CPE User’s Manual
1. Outline
1.2 System Configuration
Figure 1.1 shows a configuration of the M3062PT3-CPE system.
(3) Power supply for emulator
(not included)
Power supply cable
(2) USB interface cable
(5) Power supply for user system
(not included)
(4) User system
(not included)
(6) Host machine
(not included)
(1) Compact emulator
(7) Package converter board
(not included)
Figure 1.1 System configuration
(1) Compact emulator M3062PT3-CPE (this product)
This is a compact emulator for the M16C/62P and M16C/30P Groups with the real-time trace functions (hereafter,
emulator). The M3062PT2-EPBM on which an evaluation MCU is mounted can be also purchased separately.
(2) USB interface cable (included)
This is an interface cable for the host machine and the emulator.
(3) Power supply for emulator
This is a power supply for the emulator. Supply 5.0 V ±5% (DC).
Prepare a power supply which complies with CE marking requirements separately. The power cable is included with this
product.
Note: Be aware that there are some AC adapters whose power supply voltage varies rather widely with its load. You are
recommended to use an AC adapter with a switching power supply or a stabilized power supply.
(4) User system
This is your application system. This emulator can be used without the user system.
REJ10J1007-0400 Rev.4.00
July 29, 2009
Page 15 of 108