Download Power

Advanced Controls
3
Infrared
Communication
Configuring the Infrared Settings for FIR
You will need to change the settings for the infrared device in the BIOS (see
“I/O Device Configuration (Advanced Menu)” on page 5 - 11) to enable the
FIR setting support.
The infrared transceiver operates on a “Line
of Sight”.
To configure your computer for Fast Infrared (FIR) communication follow
these steps:
Make sure nothing is
blocking the “Line of
Sight” between your
system’s transceiver
and the destination’s
transceiver.
1.
2.
3.
4.
5.
6.
Click Start, point to Settings and click Control Panel.
Double-click Wireless Link icon.
Click Hardware (tab), then click Properties (button).
Select Advanced (tab).
Select “Infrared Transceiver A” and change the Value to “HP HSDL2300/3600”.
Click OK > OK.
For further information, please refer to the manual of the device you wish to
connect.
3 - 22 Configuring the Infrared Settings for FIR